Diff Coolers

martin82 · 12-11-2013, 01:17 PM

actually I would not run a fuel cell either unless its a dedicated track car with a fully enclosed system also. Would be a lot easier to fix the fuel starve with a simple bolt on fuel cell in the trunk but like I said, I just dont like the idea of having any type of fuel/oil/lines, etc as much as possible as my car is not a dedicated track car.

matcop · 12-11-2013, 02:20 PM

Dumb question possibly ?

Since I cooked my oil last time at the track, it pissed out the tube and I got blow back all over the car and Im sure some on the track. Do I still need a catch can just in case the fluid expands or overheats that much or will the diff cooler negate needing a catch can.

Also, what about heat bleed over from the exhaust. Im running test pipes and my exhaust is hot as #@!!. Should I think about wrapping the pipes ??

synolimit · 12-11-2013, 03:25 PM

Quote:

Originally Posted by martin82

actually I would not run a fuel cell either unless its a dedicated track car with a fully enclosed system also. Would be a lot easier to fix the fuel starve with a simple bolt on fuel cell in the trunk but like I said, I just dont like the idea of having any type of fuel/oil/lines, etc as much as possible as my car is not a dedicated track car.

To each their own. Its been done enough I feel safe.

synolimit · 12-11-2013, 03:26 PM

Quote:

Originally Posted by matcop

Dumb question possibly ?

Since I cooked my oil last time at the track, it pissed out the tube and I got blow back all over the car and Im sure some on the track. Do I still need a catch can just in case the fluid expands or overheats that much or will the diff cooler negate needing a catch can.

Also, what about heat bleed over from the exhaust. Im running test pipes and my exhaust is hot as #@!!. Should I think about wrapping the pipes ??

You boiled over your diff oil out the breather and onto the track? That sounds over filled to me.

Megan370z · 12-11-2013, 03:37 PM

For those that are going with the Tilton oil pump, watch out which one you are getting.
the cheapest one are designed for intermittent use ONLY
which are the 40-524 & 40-525.

IMO a thermal switch should be used with those 2 type if you want to be on the safe side
I went with the 40-527 and ofcourse that thermal switch even if its not required.

synolimit · 12-11-2013, 03:51 PM

Quote:

Originally Posted by Megan370z

For those that are going with the Tilton oil pump, watch out which one you are getting.
the cheapest one are designed for intermittent use ONLY
which are the 40-524 & 40-525.

IMO a thermal switch should be used with those 2 type if you want to be on the safe side
I went with the 40-527 and ofcourse that thermal switch even if its not required.

Edit, what a second, now the PDF file on all of them has changed! Wtf! Seems they redid the PDF file because everything was wrong, I hope. Now I guess you're right Megan. Weights are switched too.

524 is intermittent and 5.5lbs 1-2hr, 15 min cool down
525 is continuous and 3.5lbs 1000hr continuous

Megan370z · 12-11-2013, 04:03 PM

Quote:

Originally Posted by synolimit

Edit, what a second, now the PDF file on all of them has changed! Wtf!

524 is intermittent and 5.5lbs 1-2hr, 15 min cool down
525 is continuous and 3.5lbs 1000hr continuous

you might want to re-edit your post .,, the 525 is not continuous...

Cooler Pumps
Intermittent duty, Buna diaphragm
40-524
Intermittent duty, Viton diaphragm
40-525
Continuous duty, Buna diaphragm
40-527

http://tiltonracing.com/wp-content/u...oler-Pumps.pdf

edit; ... hehe no worries..

matcop · 12-11-2013, 04:41 PM

In regards to the overfill, It was a very reputable shop that did the work on the diff . I don't believe so (Sometimes **** happens)

It was probably 105 air temperature 125 degrees at track temperature along with my hot *** exhaust and me driving the crap out of the car. I posted a video of that track day. May be someone can enlighten me.

Anyway, I pulled off track and drove an hour and a half on a Saturday, they drained the fluid, added a 3 foot breather tube in case I cooked the oil, put in a different fluid and it seemed to work. Now that I have the time, I want to get all of my cooling issues in order so that I don't have to worry so much about the warmer days.

Also, from what I can remember, there are quite a few people that have boiled over their fluid while racing and had the same problem. The worst is the cleanup and even after driving it, you have to wait about 2 months for the stuff to burn off.

12-11-2013, 02:20 PM	#17 (permalink)
matcop Base Member Join Date: Jun 2012 Location: Montclair Posts: 68 Drives: 2009 370 Z Silver Rep Power: 12	Dumb question possibly ? Since I cooked my oil last time at the track, it pissed out the tube and I got blow back all over the car and Im sure some on the track. Do I still need a catch can just in case the fluid expands or overheats that much or will the diff cooler negate needing a catch can. Also, what about heat bleed over from the exhaust. Im running test pipes and my exhaust is hot as #@!!. Should I think about wrapping the pipes ?? Last edited by matcop; 12-11-2013 at 02:26 PM.

12-11-2013, 03:37 PM	#20 (permalink)
Megan370z A True Z Fanatic Join Date: Oct 2009 Location: Canada Posts: 1,156 Drives: 370z Rep Power: 23	For those that are going with the Tilton oil pump, watch out which one you are getting. the cheapest one are designed for intermittent use ONLY which are the 40-524 & 40-525. IMO a thermal switch should be used with those 2 type if you want to be on the safe side I went with the 40-527 and ofcourse that thermal switch even if its not required. __________________ Megan Journal Click Me ....................One Man Team Motorsport Click Me

12-11-2013, 04:41 PM	#23 (permalink)
matcop Base Member Join Date: Jun 2012 Location: Montclair Posts: 68 Drives: 2009 370 Z Silver Rep Power: 12	In regards to the overfill, It was a very reputable shop that did the work on the diff . I don't believe so (Sometimes ** happens) It was probably 105 air temperature 125 degrees at track temperature along with my hot * exhaust and me driving the crap out of the car. I posted a video of that track day. May be someone can enlighten me. Anyway, I pulled off track and drove an hour and a half on a Saturday, they drained the fluid, added a 3 foot breather tube in case I cooked the oil, put in a different fluid and it seemed to work. Now that I have the time, I want to get all of my cooling issues in order so that I don't have to worry so much about the warmer days. Also, from what I can remember, there are quite a few people that have boiled over their fluid while racing and had the same problem. The worst is the cleanup and even after driving it, you have to wait about 2 months for the stuff to burn off. Last edited by matcop; 12-11-2013 at 04:43 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
manual diff and auto diff	reldas	Engine & Drivetrain	3	02-02-2015 02:39 AM
[FOR SALE] Nismo 370z diff with 4.08 gears and nismo finned diff cover	MrVQHR	Parts for sale (Private Classifieds)	3	07-16-2012 09:05 PM
Oil Coolers and Oil changes	Kandy OrangeZ	Engine & Drivetrain	37	06-26-2011 07:36 AM
WTT: My Base Diff + Cash for Your Sport Diff	aadosx	South East Region	0	04-27-2011 05:41 PM
WTT: My Base Diff + Cash for Your Sport Diff	aadosx	Parts for sale (Private Classifieds)	11	04-27-2011 05:40 PM

12-11-2013, 01:17 PM	#16 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	actually I would not run a fuel cell either unless its a dedicated track car with a fully enclosed system also. Would be a lot easier to fix the fuel starve with a simple bolt on fuel cell in the trunk but like I said, I just dont like the idea of having any type of fuel/oil/lines, etc as much as possible as my car is not a dedicated track car.