CJM Fuel Starvation Control Product, Round 2

phunk · 06-19-2015, 02:54 PM

Heres so you guys know that I am not full of it! (pic attached)

Today I got most of the pieces back from anodizing.

Also, the 4" tubing came in today!!! So this weekend we will be gearing up to build the welded mid sections! Should have them done early to middle of next week and then they can get anodized and this is all done.

1cleanZ · 06-24-2015, 08:40 AM

Quote:

Originally Posted by phunk

Heres so you guys know that I am not full of it! (pic attached)

Today I got most of the pieces back from anodizing.

Also, the 4" tubing came in today!!! So this weekend we will be gearing up to build the welded mid sections! Should have them done early to middle of next week and then they can get anodized and this is all done.

patabq · 06-27-2015, 09:18 AM

Want in! Please. Bought 2016 yesterday and will need this. I will pay full right now if you let me in.

ValidusVentus · 06-23-2015, 09:34 PM

Hey Phunk, just checking in, I'm still 100% down. If I fail to check the forum (IE: this thread) and miss and update don't count me out! Trying to check this regularly but forget sometimes. Just shoot me a PM if need be or call me at five zero 2 - 544 - two 5 three nine. Have a good one.

RN SHARK · 06-28-2015, 11:29 PM

Please add me to the next batch whenever that will be. I can't go 3 laps at VIR without hiccuping off every right hander. Killing my lap times. I don't even know how much these are now.

phunk · 07-01-2015, 01:55 AM

The canisters were completed and are out for anodizing.

I am busy with oil pan production stuff but perhaps this weekend I will get organized to start accepting payments for the reserved RRPs and then we will be able to see if there are any left over from abandoned pre-orders.

Spec Jay · 07-01-2015, 06:37 AM

Ah crap lol. I forgot about this and just bought a OS Giken Diff.

/edit

Still in tho.

AnthonyD1978 · 07-06-2015, 04:26 PM

I'm still a go Phunk.

vestitozed · 07-07-2015, 09:13 AM

I want one! Put me down for pre order please!

AnthonyD1978 · 07-07-2015, 11:38 AM

Quote:

Originally Posted by vestitozed

I want one! Put me down for pre order please!

You might be able to get in on this batch if someone backs out of their pre-order. If not you'll have to wait for the next batch. If there is one...

1cleanZ · 07-07-2015, 02:49 PM

still.... waiting....

Not able to register for the road course event until I have this installed and ready to go. Keep us updated Charles!

phunk · 07-07-2015, 11:55 PM

"official" update post:

1: Current quote on ETA of the canister parts returning from anodizing is Friday 7/10 or Monday 7/13. While that isn't a guaranteed time frame, it means it is highly probably that everything will be back in my hands next week.

2: I have re-added the RRP item to the new website: Here

3: Anyone on the pre-sale list is welcome to complete their transaction. I will hold/reserve pre-sale units for up to 30 days from when the first one ships.

4: So far at least one member has left the pre-sale, leaving a unit available. I cant even count how many people have asked me to let them know if one became available via PM, email, or phone.

Unfortunately this makes it a little messy. For this unit and any others that become available: Anyone who has asked and still wants one, find the PM or email that you inquired and post a date so that I can verify and create a proper line. I have over 2300 stored PMs here and I will never be able to sort it out myself.

We may or may not end up with a handful of these available. If there is a long enough line, I suppose that would mean its time to go ahead and start another run of them.

AnthonyD1978 · 07-08-2015, 09:22 AM

Quote:

Originally Posted by phunk

"official" update post:

1: Current quote on ETA of the canister parts returning from anodizing is Friday 7/10 or Monday 7/13. While that isn't a guaranteed time frame, it means it is highly probably that everything will be back in my hands next week.

2: I have re-added the RRP item to the new website: Here

3: Anyone on the pre-sale list is welcome to complete their transaction. I will hold/reserve pre-sale units for up to 30 days from when the first one ships.

4: So far at least one member has left the pre-sale, leaving a unit available. I cant even count how many people have asked me to let them know if one became available via PM, email, or phone.

Unfortunately this makes it a little messy. For this unit and any others that become available: Anyone who has asked and still wants one, find the PM or email that you inquired and post a date so that I can verify and create a proper line. I have over 2300 stored PMs here and I will never be able to sort it out myself.

We may or may not end up with a handful of these available. If there is a long enough line, I suppose that would mean its time to go ahead and start another run of them.

1: Spec Jay
2: 1cleanZ
3: AnthonyD1978 - PAID
4: tracyx`9
5: D.B.
6: GSS138
7: a.stewart4242
8: J.L.
9: Arrvaxx
10: CANCELED
11: ValidusVentus
12: SurfDog

boosted180 · 07-08-2015, 11:49 AM

I PM'd you and also called and left a message about the canceled spot and wanted to take that spot and leave a deposit today if possible. Please let me know. Thanks.

Brian

Quote:

Originally Posted by phunk

"official" update post:

1: Current quote on ETA of the canister parts returning from anodizing is Friday 7/10 or Monday 7/13. While that isn't a guaranteed time frame, it means it is highly probably that everything will be back in my hands next week.

2: I have re-added the RRP item to the new website: Here

3: Anyone on the pre-sale list is welcome to complete their transaction. I will hold/reserve pre-sale units for up to 30 days from when the first one ships.

4: So far at least one member has left the pre-sale, leaving a unit available. I cant even count how many people have asked me to let them know if one became available via PM, email, or phone.

Unfortunately this makes it a little messy. For this unit and any others that become available: Anyone who has asked and still wants one, find the PM or email that you inquired and post a date so that I can verify and create a proper line. I have over 2300 stored PMs here and I will never be able to sort it out myself.

We may or may not end up with a handful of these available. If there is a long enough line, I suppose that would mean its time to go ahead and start another run of them.

vestitozed · 07-08-2015, 08:49 AM

Hi Charles i emailed you about this and i can see you have a cancelled now. Can i take that spot pretty please?

06-23-2015, 09:34 PM	#4 (permalink)
ValidusVentus Enthusiast Member Join Date: Jun 2011 Location: Washington State Posts: 400 Drives: #18 Z34 Rep Power: 24	Hey Phunk, just checking in, I'm still 100% down. If I fail to check the forum (IE: this thread) and miss and update don't count me out! Trying to check this regularly but forget sometimes. Just shoot me a PM if need be or call me at five zero 2 - 544 - two 5 three nine. Have a good one. __________________ Mods: Dedicated caged track car, lots of things. \|\|\| Valkyrie Autosport \|\|\|

06-28-2015, 11:29 PM	#5 (permalink)
RN SHARK Track Member Join Date: Jun 2011 Location: Delafield, WI Age: 45 Posts: 618 Drives: 09 370Z, 14 SRT GC Rep Power: 36	Please add me to the next batch whenever that will be. I can't go 3 laps at VIR without hiccuping off every right hander. Killing my lap times. I don't even know how much these are now. __________________ ___________ '09 6sp/Z1/PowerTrix/SPL/Swift/SRP/Whiteline/F.I.LTH&CBE/UpRev by Seb/CJM/Stillen/Ings+1/RJM/TrackSpec/Sparco/Motul/Wavetrac/Coolerworx/Verus/CraftSquare '14 SRT Grand Cherokee; '08 TL Type-S

07-01-2015, 01:55 AM	#6 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,669 Drives: 370 Rep Power: 974724	The canisters were completed and are out for anodizing. I am busy with oil pan production stuff but perhaps this weekend I will get organized to start accepting payments for the reserved RRPs and then we will be able to see if there are any left over from abandoned pre-orders. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

07-01-2015, 06:37 AM	#7 (permalink)
Spec Jay A True Z Fanatic Join Date: Apr 2009 Location: Bummerton Posts: 1,510 Drives: MtB 09 370z Rep Power: 20	Ah crap lol. I forgot about this and just bought a OS Giken Diff. /edit Still in tho. __________________ 09 Monterey Blue Global Time Attack Street Class Build Build Thread:Saber! Instagram:@SpecJay Last edited by Spec Jay; 07-06-2015 at 04:29 PM.

07-07-2015, 02:49 PM	#11 (permalink)
1cleanZ A True Z Fanatic Join Date: Dec 2010 Location: Twin Cities, MN Posts: 1,132 Drives: '09 PW Nismo Rep Power: 21	still.... waiting.... Not able to register for the road course event until I have this installed and ready to go. Keep us updated Charles! __________________ 2009 PW Nismo #0021 -My Built Progress >>1cleanG to 1cleanZ<< Team NextLevel

06-27-2015, 09:18 AM	#3 (permalink)
patabq Base Member Join Date: Jun 2015 Location: Albuquerque, NM Posts: 64 Drives: Corvette Z06 07 Rep Power: 11	Want in! Please. Bought 2016 yesterday and will need this. I will pay full right now if you let me in.

07-06-2015, 04:26 PM	#8 (permalink)
AnthonyD1978 Base Member Join Date: Mar 2010 Location: OC, Ca Posts: 200 Drives: 2010 370z Nismo Rep Power: 16	I'm still a go Phunk.

07-07-2015, 09:13 AM	#9 (permalink)
vestitozed Base Member Join Date: Apr 2014 Location: Australia Posts: 6 Drives: 12 370z 6mt Rep Power: 12	I want one! Put me down for pre order please!

07-07-2015, 11:55 PM	#12 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,669 Drives: 370 Rep Power: 974724	"official" update post: 1: Current quote on ETA of the canister parts returning from anodizing is Friday 7/10 or Monday 7/13. While that isn't a guaranteed time frame, it means it is highly probably that everything will be back in my hands next week. 2: I have re-added the RRP item to the new website: Here 3: Anyone on the pre-sale list is welcome to complete their transaction. I will hold/reserve pre-sale units for up to 30 days from when the first one ships. 4: So far at least one member has left the pre-sale, leaving a unit available. I cant even count how many people have asked me to let them know if one became available via PM, email, or phone. Unfortunately this makes it a little messy. For this unit and any others that become available: Anyone who has asked and still wants one, find the PM or email that you inquired and post a date so that I can verify and create a proper line. I have over 2300 stored PMs here and I will never be able to sort it out myself. We may or may not end up with a handful of these available. If there is a long enough line, I suppose that would mean its time to go ahead and start another run of them. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

07-08-2015, 08:49 AM	#15 (permalink)
vestitozed Base Member Join Date: Apr 2014 Location: Australia Posts: 6 Drives: 12 370z 6mt Rep Power: 12	Hi Charles i emailed you about this and i can see you have a cancelled now. Can i take that spot pretty please?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hit fuel starvation tonight	NitrousZ34	Engine & Drivetrain	28	04-07-2017 07:25 PM
Fuel starvation, who else?	Mike	Track / Autocross / Drifting / Dragstrip	556	12-14-2016 03:44 PM
Fuel Starvation Control Product	phunk	Track / Autocross / Drifting / Dragstrip	549	10-10-2013 03:25 AM
Fuel Starvation poll	Felix 808	Nissan 370Z General Discussions	32	07-25-2013 01:02 AM