anyone installed Iq3 datalogger?

BGTV8 · 11-27-2012, 03:58 AM

Won't this simply read off the OBDII port with a dongle of some kind.

I have one of these being fitted to my race car as it is under-going an analogue to digital conversion in our off-season and we've chosen to use a Haltech ECU and the Haltech badges the IQ3 as its "dash".

Inlcuded in my kit was a dongle that plugs into the Z34 OBDII port and I canthen plug wghat looks like a serial connector on the dash into the dongle.

I won;t have it all back in my hands until later in December and based on the IQ3 doc off the Haltech web-site, all I need are two config files for the dash, one for the Z34 and another for the race car ...

I'd be surprised if you'd need to patch into thw wiring as these kits are marketed as comppetition to the MoTeC CDL3 and that I know is plug and play with an OBDII connector.

Not sure if this helps ...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does anyone have this installed???	DEpointfive0	Engine & Drivetrain	4	09-26-2012 11:02 PM
free ebook on datalogger	cossie1600	Track / Autocross / Drifting / Dragstrip	0	07-25-2012 01:14 PM
Tying in a datalogger (DL1 in my case) to the ECU?	vjarnot	Track / Autocross / Drifting / Dragstrip	7	05-19-2012 10:28 AM
anyone have a datalogger?	cossie1600	Track / Autocross / Drifting / Dragstrip	9	05-17-2011 01:43 PM
recommendations for scantool/datalogger	Pharmacist	Nissan 370Z General Discussions	3	12-01-2010 08:52 AM

11-27-2012, 03:58 AM	#15 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,503 Drives: 09 Nissan 370Z M6 Rep Power: 29907	Won't this simply read off the OBDII port with a dongle of some kind. I have one of these being fitted to my race car as it is under-going an analogue to digital conversion in our off-season and we've chosen to use a Haltech ECU and the Haltech badges the IQ3 as its "dash". Inlcuded in my kit was a dongle that plugs into the Z34 OBDII port and I canthen plug wghat looks like a serial connector on the dash into the dongle. I won;t have it all back in my hands until later in December and based on the IQ3 doc off the Haltech web-site, all I need are two config files for the dash, one for the Z34 and another for the race car ... I'd be surprised if you'd need to patch into thw wiring as these kits are marketed as comppetition to the MoTeC CDL3 and that I know is plug and play with an OBDII connector. Not sure if this helps ...