|
Originally Posted by ChrisSlicks I had the same problem. Get the SPC camber arms and set the front camber to between -2.0 and -2.5. The understeer will be completely eradicated.
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
11-10-2009, 12:57 PM
|
#11 (permalink) | |
|
Track Member
Join Date: Apr 2009
Location: Socal
Posts: 555
Drives: 09 370z
Rep Power: 18  |
Quote:
front tires are already showing slight uneven wear from dropping it ~1". while i dont mind cranking the camber, i think of it as sort of a band aide to the problem. even the rear bar set to the stiffest position, oversteer can only be achived by hard accelleration out of turns.  i mean, the car is STIFF. pulling into my driveway at an angle causes the rear inside tire to literally lift off the ground.
__________________
2009 PW Sport/Touring/Nav M6 Stillen Gen 3 Intake/CBE/Berk HFC/BC BR Coil over/Phillips 6500k/Hotchkis Sways/Stillen oil cooler/B&M SS |
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 370Z Speaker Setup | Ricochet48 | Audio & Video | 19 | 01-09-2013 08:23 PM |
| H2R Track Video (ZCON09 Track Event) | zsport1 | ZCON 2009 | 4 | 04-01-2009 06:28 PM |
| This is the setup..... | BoostedMKIV | Wheels & Tires | 11 | 03-09-2009 09:48 PM |
| New Track in Orlando | Juno | South East Region | 2 | 01-26-2009 09:08 PM |
| Obligatory First Post | Scribe | New 370Z Owner | 8 | 01-13-2009 07:21 AM |
5Likes
Threaded Mode
