Coilovers for Track and Autocross

Evildky · 08-10-2021, 05:07 PM

So the car is basically just for autocross and track, although I do drive it to the track most of the time. I've accepted I wont have suspension this year so now I just need to decide what to get.

I run in STU (autocross) and T3 (Time Trials). I require coilovers that keep the spring in the stock location (keep in mind this changes the spring rate dramatically over a true type rear coilover).

What I'm looking for;
Double adjustable
Rebuildable/Revalvable
Digressive valving
Front spring rate of about 1008 lbs/in (18KG)
Rear spring rate 896 lb/in (16KG) (again in stock location so about half that at the wheel)
Inboard spring mount, prefer some easily adjusted
Trying to keep it under $5k all in.

What I'm considering, MCS and Penske are a bit spendy.
BC now has double (ER) and triple (ZR)adjustables.
Their double adjustable ER has available digressive valving, rears default rate is pretty close to where I want to be, fronts are way soft. should be able to have them built to suit at a cost. ZR's are a bit pricey before they start wiht the upcharges, might as well, go to one of the big names. and I'd pretty much be on my own for rear spring mounting.

Redshift doesn't yet offer support for the Z34, which is weird since they support the Z33.

MCS or penske, hence the name.

Feal is about the same money as MCS or penske.

History:
I tried initially ordering Penske from Strano (awesome guy but he just doesn't know the chassis). Agreed to cancel order so I could order from someone who knows the chassis better.

Discovered Diftech sold not just awesome rear spring mount but they could build the penske's and they know the chassis (Doug is a very knowledgeable guy, but flakey). After two months and no finite shipping time frame, he agreed to refund my purchase (on the 60th day, last day I would be able to dispute the change on my card) and let me know when they get the needed parts (haven't heard anything since).

Thoughts?

cv129 · 08-10-2021, 05:52 PM

Seems like he still had it as of EOY 2019. Try to contact him.

Penske Shocks For Sale (STU suspension)

Spooler · 08-10-2021, 08:10 PM

You get what you pay for on suspension. It is also wise to seek an experienced shop to help you set them up so you can get what you paid for.

Hotrodz · 08-10-2021, 08:54 PM

You are looking to satisfy two totally different beast as far as auto cross vs time trials. I would decide which you want to do the most and maybe even get to sets of springs to best suit both. Not sure if you have considered Fortune Auto as they are good product in my opinion.

I will consider MCS two ways when I am ready to upgrade. You should contact WRteknica. The owner is a phenomenal driver and has raced Nissan cars. Will is the go to guy for super cars in California and he is an MCS dealer. He well known for suspension tuning and my car is currently at his shop for the full meal deal on suspension tuning and mapping.

Sent from my SM-G965U using Tapatalk

2011 Nismo#91 · 08-11-2021, 05:39 AM

MCS or penske as you mentioned are the ones you should go for. Look for a second hand one to save some $ and rebuild/service as needed. Not sure if JRZ is in your price range but they work well enough for me. Ease of serviceability should be your deciding factor for those options.

DarkJak · 08-11-2021, 10:47 AM

At your budget, MCS fits in perfectly (probably Penske too, but I haven't had experience with them). I got my 2WNR second hand, enough of a discount to cover a couple of rebuild.

gomer_110 · 08-11-2021, 04:12 PM

AST is also another solid option.

For rear spring mounts, you can always get SPL mid-links and replace the sphericals with poly bushed rod ends.

justin_boy · 08-12-2021, 01:25 PM

i just got mcs 2 ways. I ordered 1 ways and mcs built 2 way by mistake lol. Even the 1 ways are the way to go. only thing that might throw you over budget are spl mid links.

Hotrodz · 08-12-2021, 03:38 PM

Quote:

Originally Posted by justin_boy

i just got mcs 2 ways. I ordered 1 ways and mcs built 2 way by mistake lol. Even the 1 ways are the way to go. only thing that might throw you over budget are spl mid links.

Did they charge you for their mistake lol?

Sent from my SM-G965U using Tapatalk

cv129 · 08-12-2021, 05:04 PM

Quote:

Originally Posted by justin_boy

i just got mcs 2 ways. I ordered 1 ways and mcs built 2 way by mistake lol.

Just learned that I have new levels of jealousy

justin_boy · 08-20-2021, 09:23 PM

Quote:

Originally Posted by Hotrodz

Did they charge you for their mistake lol?

Sent from my SM-G965U using Tapatalk

lol they figured it out when we unpacked it, we let them know and they were okay with it so i only paid for the 1 way

justin_boy · 08-20-2021, 09:23 PM

Quote:

Originally Posted by cv129

Just learned that I have new levels of jealousy

haha we'll all get our chance

Hotrodz · 08-20-2021, 11:00 PM

Quote:

Originally Posted by justin_boy

lol they figured it out when we unpacked it, we let them know and they were okay with it so i only paid for the 1 way

Sweet! Sometimes lady luck smiles on us!!!

Sent from my SM-G965U using Tapatalk

08-10-2021, 05:07 PM	#1 (permalink)
Evildky Base Member Join Date: Aug 2020 Location: Louisville, KY Posts: 89 Drives: 13 Nismo STU/T3 Rep Power: 10188	Coilovers for Track and Autocross So the car is basically just for autocross and track, although I do drive it to the track most of the time. I've accepted I wont have suspension this year so now I just need to decide what to get. I run in STU (autocross) and T3 (Time Trials). I require coilovers that keep the spring in the stock location (keep in mind this changes the spring rate dramatically over a true type rear coilover). What I'm looking for; Double adjustable Rebuildable/Revalvable Digressive valving Front spring rate of about 1008 lbs/in (18KG) Rear spring rate 896 lb/in (16KG) (again in stock location so about half that at the wheel) Inboard spring mount, prefer some easily adjusted Trying to keep it under $5k all in. What I'm considering, MCS and Penske are a bit spendy. BC now has double (ER) and triple (ZR)adjustables. Their double adjustable ER has available digressive valving, rears default rate is pretty close to where I want to be, fronts are way soft. should be able to have them built to suit at a cost. ZR's are a bit pricey before they start wiht the upcharges, might as well, go to one of the big names. and I'd pretty much be on my own for rear spring mounting. Redshift doesn't yet offer support for the Z34, which is weird since they support the Z33. MCS or penske, hence the name. Feal is about the same money as MCS or penske. History: I tried initially ordering Penske from Strano (awesome guy but he just doesn't know the chassis). Agreed to cancel order so I could order from someone who knows the chassis better. Discovered Diftech sold not just awesome rear spring mount but they could build the penske's and they know the chassis (Doug is a very knowledgeable guy, but flakey). After two months and no finite shipping time frame, he agreed to refund my purchase (on the 60th day, last day I would be able to dispute the change on my card) and let me know when they get the needed parts (haven't heard anything since). Thoughts?

08-10-2021, 05:52 PM	#2 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,270 Drives: 09 Nismo, 16 Nismo Rep Power: 163996	Seems like he still had it as of EOY 2019. Try to contact him. Penske Shocks For Sale (STU suspension) __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield

08-10-2021, 08:10 PM	#3 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,125 Drives: 2013 Nismo 370z Rep Power: 2684394	You get what you pay for on suspension. It is also wise to seek an experienced shop to help you set them up so you can get what you paid for. 2011 Nismo#91, Rusty and redondoaveb like this.

08-10-2021, 08:54 PM	#4 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	You are looking to satisfy two totally different beast as far as auto cross vs time trials. I would decide which you want to do the most and maybe even get to sets of springs to best suit both. Not sure if you have considered Fortune Auto as they are good product in my opinion. I will consider MCS two ways when I am ready to upgrade. You should contact WRteknica. The owner is a phenomenal driver and has raced Nissan cars. Will is the go to guy for super cars in California and he is an MCS dealer. He well known for suspension tuning and my car is currently at his shop for the full meal deal on suspension tuning and mapping. Sent from my SM-G965U using Tapatalk JARblue, Rusty, madwi and 2 others like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

08-11-2021, 05:39 AM	#5 (permalink)
2011 Nismo#91 A True Z Fanatic Join Date: Mar 2011 Location: NJ Posts: 2,413 Drives: slowly Rep Power: 40570	MCS or penske as you mentioned are the ones you should go for. Look for a second hand one to save some $ and rebuild/service as needed. Not sure if JRZ is in your price range but they work well enough for me. Ease of serviceability should be your deciding factor for those options. Rusty, Hotrodz and Spooler like this. __________________ GTR TT 493Whp/431lbft, Ecutek, Southbend 6puck,Quaife, RPM RollBar 4Point, R888R, JRZ RSPro F(10R/10C) R(10R/6C) 1000f500r inlbs+150inlbs Tender, SPL everywhere.Full Specs Last edited by 2011 Nismo#91; 08-11-2021 at 05:47 AM.

08-11-2021, 10:47 AM	#6 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,397 Drives: 2009 370Z Rep Power: 16805	At your budget, MCS fits in perfectly (probably Penske too, but I haven't had experience with them). I got my 2WNR second hand, enough of a discount to cover a couple of rebuild. __________________ @stupidtoycars \| My track vids 09 7AT\|MCS 2WNR\|Topgunz Rotrex\|Ecutek (Eugene)\|Maxxis RC1\|Titan-7 TS-5\|OSG LSD\|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler\|Fismo\|G-LOC R12/R10\|Zeta III L\|NLR Wing and Splitter\|CJM Pan and Fuel Hat\|Radium Surge Tank\|AP Racing CP9668

08-11-2021, 04:12 PM	#7 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36941	AST is also another solid option. For rear spring mounts, you can always get SPL mid-links and replace the sphericals with poly bushed rod ends. Hotrodz likes this. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

08-12-2021, 01:25 PM	#8 (permalink)
justin_boy Track Member Join Date: May 2015 Location: woodland hills Posts: 600 Drives: z34 Rep Power: 8368	i just got mcs 2 ways. I ordered 1 ways and mcs built 2 way by mistake lol. Even the 1 ways are the way to go. only thing that might throw you over budget are spl mid links. cv129 and Hotrodz like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Autocross (ASP) / track coilover dilemma	PharmDZ	Track / Autocross / Drifting / Dragstrip	18	01-01-2016 09:04 AM
New To Tuning. Want an Autocross / Track Car	ryanstreet	Track / Autocross / Drifting / Dragstrip	14	07-11-2015 08:37 AM
helmets for autocross/track?	kittens	Track / Autocross / Drifting / Dragstrip	26	10-02-2013 06:32 AM
need good autocross/track tires	eastsyder	Wheels & Tires	6	07-13-2011 02:58 PM
Track Racing/Autocross Forum	M.Bonanni	The370Z.com Feedback, Suggestions & Questions	17	01-28-2009 08:27 PM