07-13-2018, 11:50 AM
|
#6 (permalink)
|
|
A True Z Fanatic
Join Date: Aug 2012
Location: NW, AZ
Posts: 9,330
Drives: 10 Nissan 370z Nismo
Rep Power: 2684385
|
Quote:
Originally Posted by KM15Z
I'm running into the same issue with the same parts (XP10/8, slotted rotors, Motul RBF660 fluid, stainless brake lines). The Stillen brake duct does not provide enough air volume to cool the rotors and calipers, the ducting is two inches. I have a friend who fabricated 3 inch ducts which apparently provided a lot more cooling (dropped the peak temp by 150F). The two piece rotor provides additional cooling.
Anyone have any experience with carbon ceramic rotors? I know they're expensive, but I'm not sure if that's a solution.
|
You also don't want to over cool as well as track pads do need some heat in them to work properly! You may need a more aggressive pad or a bbk as well as going to a 3" hose.
Sent from my SM-G965U using Tapatalk
__________________
Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:|Fast Intentions 3" TT-TDX|SpecialtyZ/Fast Intentions 72 Row Oil Cooler|SZ 6 Puck Clutch & Flywheel|3GsCustoms|Z1|Wavetrac|Hotchkis|Whiteline |Blitz|Fortune Auto 500|Fujimura|SPL|H&R|TK|TWM|RPM Rollbar|Sparco|Next Level Performance|TrackSpec|AeroFlow Dynamics|Pioneer|
|
|
|
Similar Threads
12Likes
Threaded Mode
