Question for track guys on 18s

DarkJak

Does everyone run the same offset on the front and rear wheels and wheel spacers in the rear? For people running square tire setups.

__________________
@stupidtoycars | My track vids
09 7AT|MCS 2WNR|Topgunz Rotrex|Ecutek (Eugene)|Maxxis RC1|Titan-7 TS-5|OSG LSD|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler|Fismo|G-LOC R12/R10|Zeta III L|NLR Wing and Splitter|CJM Pan and Fuel Hat|Radium Surge Tank|AP Racing CP9668

echoshotz

some people do sure, I'm just going with a 10.5 +15 all the way around. I've got enough camber/ride height to tuck the front wheel on compression.

__________________
2014 Solid Red Nismo 370z
Motordyne|Synergy Composites|Stance Suspension|Recaro|RJM|EVOR

Hotrodz

It all depends on what wheels you buy and what off sets they offer. My Enkie nt01 are 18x10.5 plus 30 and I run 15 mm spacers up front. My Volk TE SLs are 18x11 plus 18 and the fronts polk but don't rub anywhere.

Sent from my SM-N910P using Tapatalk

__________________
Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:|Fast Intentions 3" TT-TDX|SpecialtyZ/Fast Intentions 72 Row Oil Cooler|SZ 6 Puck Clutch & Flywheel|3GsCustoms|Z1|Wavetrac|Hotchkis|Whiteline |Blitz|Fortune Auto 500|Fujimura|SPL|H&R|TK|TWM|RPM Rollbar|Sparco|Next Level Performance|TrackSpec|AeroFlow Dynamics|Pioneer|

Eagle

Ideally you want to run square tires, square wheels and square offsets. That way you can rotate freely without any constraint or concern with fitment.
I am running Nexen SUR4 275's all around, on 18 x 10 et +25 with a 20mm spacer in the rear. I've been running that spacer for 2 years now on the track and never had a single issue.

__________________

nismo| EVO-R High Wing | Stillen Gen 3 CAI | SEIBON TS Hood | Z1 34 Row Oil Cooler | VMR 810 Wheels | Endless MX72 Pads |Sabelt GT-140 Seat |Fly1Motorsports RS1 Fenders | Hotchkis Front Sway Bar | Berk HFC |