Some feedback on 4.08 FD+ SRM+Quaiffe LSD on road course.

DR_ · 03-30-2015, 10:09 AM

How I did it was pull out cup holder (pull back and up). There is a piece of plastic covering the yaw sensor so I got some tin snips and just cut the plastic. Then get a screw driver and press the tab on the yaw sensor plug (tab is on drivers side) and pull on plug until it pops out. You could remove the whole center console so you don't have to cut anything or if you have ninja hand skills you might be able to get around the plastic and get the plug out but I knew I would be getting in there a lot so I didn't mind cutting the plastic to make it easier in the future.

GSS138 · 03-30-2015, 05:05 PM

Quote:

Originally Posted by DR_

How I did it was pull out cup holder (pull back and up). There is a piece of plastic covering the yaw sensor so I got some tin snips and just cut the plastic. Then get a screw driver and press the tab on the yaw sensor plug (tab is on drivers side) and pull on plug until it pops out. You could remove the whole center console so you don't have to cut anything or if you have ninja hand skills you might be able to get around the plastic and get the plug out but I knew I would be getting in there a lot so I didn't mind cutting the plastic to make it easier in the future.

And then what? I don't understand what needs to happen exactly after that. I know there is a green wire, etc. Some people put a switch in, yadda yadda. Do you just cut the green wire and then solder in a switch?

nismo13807 · 03-30-2015, 09:35 PM

Quote:

Originally Posted by GSS138

And then what? I don't understand what needs to happen exactly after that. I know there is a green wire, etc. Some people put a switch in, yadda yadda. Do you just cut the green wire and then solder in a switch?

DIY Yaw Sensor rocker switch

looks like just cut the green wire.. then solder it to the post of a switch and thats it.. maybe buy extra wire to extend it to reach the switch if u have to?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] 6MT VLSD 3.6:1 & Quaiffe LSD $1500	370ZilverZ	Parts for sale (Private Classifieds)	30	08-03-2012 09:30 AM
New guy saying hi and looking for some feedback	BLM	New Forum Member	5	04-30-2011 09:16 PM
Looking for some Feedback	B996	Intake/Exhaust	5	03-31-2011 09:39 PM
Looking for some feedback...	resopaton	New Forum Member	7	10-21-2009 06:08 AM
Road and Track: Top 5 Twisty-Road Tamers, Nissan 370Z	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	2	11-28-2008 03:51 PM

03-30-2015, 10:09 AM	#1 (permalink)
DR_ Track Member Join Date: Jul 2009 Location: Dallas Posts: 981 Drives: Touring/Sport M6 PG Rep Power: 19	How I did it was pull out cup holder (pull back and up). There is a piece of plastic covering the yaw sensor so I got some tin snips and just cut the plastic. Then get a screw driver and press the tab on the yaw sensor plug (tab is on drivers side) and pull on plug until it pops out. You could remove the whole center console so you don't have to cut anything or if you have ninja hand skills you might be able to get around the plastic and get the plug out but I knew I would be getting in there a lot so I didn't mind cutting the plastic to make it easier in the future.