Photography Chat Version 1.0

HKYStormFront · 05-18-2011, 11:48 PM

yea it's a good idea to keep the camera face down when changing lenses too^

Dsphoto · 05-19-2011, 06:13 AM

The dust on the sensor, if it doesn't move between frames, is probably stuck.

Remember that there is a shutter moving at rapid speed, moving the air near the sensor and causing strong vibration.
If it looks like a blob a blower will not remove it. The biggest problem is oily dust which leaves blob shaped residue on the imager filter. This can only be removed with a physical cleaning, best done by a professional.

How does dust get there in the first place? If you never change your lens you will still get dist. Some of it comes from within the camera due to wear but most comes from outside. Your lens is an air pump. WHen you zoom or focus air, and the dust in it, is drawn into the lens. This is attracted to the sensor due to the sensors charge. So if this is how most dust gets into your camera you have to address how the dust gets onto your lens.

The main culprit is your camera bag. Put your bag in a strong afternoon shaft of light and give it a bang (without cameras in it). If you see dust particles coming out of it replace it. You can try to clean it but this probably won't help. The foam padding in the bag starts to break down after a while which generates dust.

I saw this first hand, a customer bought a Canon EOS-1Ds Mark III (early in the morning) for $8000, brought it home, put it in his camera bag and went out shooting. He came back that afternoon with complaining of dust on his sensor. It all came from the bag. The store sold him a new bag and cleaned his cameras and lenses and the problem went away.

6spd · 05-31-2011, 01:49 PM

And back after a long hiatus!

Here are 2 new shots I just took in one of the local parking structures. They help capture some of the darker, urban, city feel versus the typical Florida palm trees and green grass. Enjoy!

HKYStormFront · 05-31-2011, 02:57 PM

dark and moody! try black and white!

6spd · 05-31-2011, 03:38 PM

i did a black and white, but i like these better, never been crazy about black and whites.

HKYStormFront · 05-31-2011, 03:58 PM

i like a good black and white shot, but i don't do it all the time, in fact, because i shoot cars almost exclusively, i hardly ever use the B&W tool

wilsonp · 05-31-2011, 07:31 PM

Hope you don't mind, but I played with B&W & sepia conversion, crop and rotation a little - I think you're right, it is hard to make a good B&W from this one:

6spd · 05-31-2011, 08:52 PM

Quote:

Originally Posted by wilsonp

Hope you don't mind, but I played with B&W & sepia conversion, crop and rotation a little - I think you're right, it is hard to make a good B&W from this one:

hey man, you got rid of the angle

that made the shot!

thats what a Z would look like back in the 30's!

Cmike2780 · 06-01-2011, 08:25 AM

Quote:

Originally Posted by 6spd

hey man, you got rid of the angle

that made the shot!

thats what a Z would look like back in the 30's!

great shots by the way.

6spd · 06-01-2011, 08:58 AM

Thank you sir

Alchemy · 07-10-2011, 11:16 PM

Trying to get back into using my D90 more. First photoshoot in awhile. It was midday and I was battling the sun. Felt SUPER rusty, this is about all I got....

6spd · 07-10-2011, 11:50 PM

mid-day is tough, but that shot is very cool.

Alchemy · 07-11-2011, 06:32 AM

Quote:

Originally Posted by 6spd

mid-day is tough, but that shot is very cool.

Midday is rough. Thanks for the compliment. I think the shot came out pretty good.

6spd · 07-11-2011, 03:13 PM

indeed

HKYStormFront · 07-11-2011, 03:14 PM

pretty good shot, try the same spot again at golden hour!!

05-18-2011, 11:48 PM	#151 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	yea it's a good idea to keep the camera face down when changing lenses too^ __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

05-19-2011, 06:13 AM	#152 (permalink)
Dsphoto Base Member Join Date: Sep 2010 Location: Suffolk cty New York Posts: 159 Drives: 10 BC 370ZR S/T M6 Rep Power: 14	The dust on the sensor, if it doesn't move between frames, is probably stuck. Remember that there is a shutter moving at rapid speed, moving the air near the sensor and causing strong vibration. If it looks like a blob a blower will not remove it. The biggest problem is oily dust which leaves blob shaped residue on the imager filter. This can only be removed with a physical cleaning, best done by a professional. How does dust get there in the first place? If you never change your lens you will still get dist. Some of it comes from within the camera due to wear but most comes from outside. Your lens is an air pump. WHen you zoom or focus air, and the dust in it, is drawn into the lens. This is attracted to the sensor due to the sensors charge. So if this is how most dust gets into your camera you have to address how the dust gets onto your lens. The main culprit is your camera bag. Put your bag in a strong afternoon shaft of light and give it a bang (without cameras in it). If you see dust particles coming out of it replace it. You can try to clean it but this probably won't help. The foam padding in the bag starts to break down after a while which generates dust. I saw this first hand, a customer bought a Canon EOS-1Ds Mark III (early in the morning) for $8000, brought it home, put it in his camera bag and went out shooting. He came back that afternoon with complaining of dust on his sensor. It all came from the bag. The store sold him a new bag and cleaned his cameras and lenses and the problem went away. __________________ 78 Z1R, '08 ZX10R, 2010 BC Roadster S/T, 6M, Stillen G2 CAI, Invidia CBE, Berk test pipes, Painted headlights (180˚Custom), JDM rear fog, B&M short shifter, Stillen front plate mount, stubby antenna, setrab oil cooler, uprev. 337rwhp 254ft/lb corrected!

05-31-2011, 01:49 PM	#153 (permalink)
6spd A True Z Fanatic Join Date: Aug 2009 Location: South Florida Posts: 3,001 Drives: Q50RS Rep Power: 24	And back after a long hiatus! Here are 2 new shots I just took in one of the local parking structures. They help capture some of the darker, urban, city feel versus the typical Florida palm trees and green grass. Enjoy! __________________ -Jay- jonathanjamesphotographer.com

05-31-2011, 02:57 PM	#154 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	dark and moody! try black and white! __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

05-31-2011, 03:38 PM	#155 (permalink)
6spd A True Z Fanatic Join Date: Aug 2009 Location: South Florida Posts: 3,001 Drives: Q50RS Rep Power: 24	i did a black and white, but i like these better, never been crazy about black and whites. __________________ -Jay- jonathanjamesphotographer.com

05-31-2011, 03:58 PM	#156 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	i like a good black and white shot, but i don't do it all the time, in fact, because i shoot cars almost exclusively, i hardly ever use the B&W tool __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

06-01-2011, 08:58 AM	#160 (permalink)
6spd A True Z Fanatic Join Date: Aug 2009 Location: South Florida Posts: 3,001 Drives: Q50RS Rep Power: 24	Thank you sir __________________ -Jay- jonathanjamesphotographer.com

07-10-2011, 11:16 PM	#161 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 44 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	Trying to get back into using my D90 more. First photoshoot in awhile. It was midday and I was battling the sun. Felt SUPER rusty, this is about all I got.... __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL Last edited by Alchemy; 07-10-2011 at 11:18 PM.

07-10-2011, 11:50 PM	#162 (permalink)
6spd A True Z Fanatic Join Date: Aug 2009 Location: South Florida Posts: 3,001 Drives: Q50RS Rep Power: 24	mid-day is tough, but that shot is very cool. __________________ -Jay- jonathanjamesphotographer.com

07-11-2011, 03:13 PM	#164 (permalink)
6spd A True Z Fanatic Join Date: Aug 2009 Location: South Florida Posts: 3,001 Drives: Q50RS Rep Power: 24	indeed __________________ -Jay- jonathanjamesphotographer.com

07-11-2011, 03:14 PM	#165 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	pretty good shot, try the same spot again at golden hour!! __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Will there be a V8 version?	sbsmoov	Nissan 370Z General Discussions	42	09-15-2011 12:23 PM
Photography in Houston	jennyt71	Texas	1	09-22-2010 03:24 PM
Some photography	Greasy	Photography	22	09-29-2009 09:30 AM
How about a real time chat?	Pushing_Tin	The370Z.com Feedback, Suggestions & Questions	28	07-23-2009 11:04 PM

**Photography Chat** Version 1.0

Photography Chat Version 1.0