370z Part Out - Stillen G3, FI LTH/CBE, OS Giken LSD, Cobb AP

SPOHN · 03-18-2012, 01:06 PM

Quote:

Originally Posted by CZero

Actually, the OS Giken that I have is a direct drop in for the base model.

This is per the original for sale thread here:
SSR Type-F

I may be wrong about it, but the original poster says that the sport model would need a half shaft.

This LSD does come with a lot of extra parts though, I can lay them out and photo them if I need to.

I thought there was only one type which is for viscous only models in which would be sport models. Here's the link. If that was the case I would of bought one. What is your part number?
OS Super Lock LSD | Products | OS GIKEN

Z34

VQ37VHR

Y

08/12 on

Viscous Only

D-NB102061405-S

Quote from Sharif at Forged Performance on my install.
''Just to clarify with respect to the installation issues. We're very familiar with Nissan's habit of using different length and shaped stub axles in the various trims of 350Z. With the 370Z, the base model includes traction control but still an open differential. In the process they also elected to use a revised set of stub axles as well. So with 6 different stub axle choices even OS Giken wasn't entirely sure what ones to use. We ordered one short and one long axle in preparation for the installation. Upon inspection of the OEM parts we discovered that we need two SHORT stub axles NON TAPER with snap ring grooves/snap rings. Instead of sending Chris home and ordering a second short stub axle we machined and modified his existing axle to precisely the same measurements and tolerances of the OEM part which including machining a new snap ring groove. This is a substantial amount of extra time, but we didn't charge the customer of any of this and our objective was to complete the job as promised and get him on the road safely. Under normal circumstances no modifications are needed during install. Mission accomplished.''

Boost_lee · 03-18-2012, 01:11 PM

Confirmed that I will be heading to houston on Thursday if we can work out a picked-up deal on the intakes

CZero · 03-18-2012, 01:22 PM

Quote:

Originally Posted by Boost_lee

Confirmed that I will be heading to houston on Thursday if we can work out a picked-up deal on the intakes

Ok, I don't know how much shipping for the intakes is yet, but how about $375 picked up? I think that is what I pm'ed you.

Boost_lee · 03-18-2012, 01:34 PM

Quote:

Originally Posted by CZero

Ok, I don't know how much shipping for the intakes is yet, but how about $375 picked up? I think that is what I pm'ed you.

I didn't get a reply yet

sounds good, pending pics. I'll send another PM asking for contact info

MattP725 · 03-18-2012, 03:34 PM

Quote:

Originally Posted by TerribleONE

I'm in if it's for the base.. Dibs!

Intakes will fit base and touring exactly the same.

CZero · 03-18-2012, 03:47 PM

Quote:

Originally Posted by MattP725

Intakes will fit base and touring exactly the same.

Think he was asking about the LSD but quoted different post.

03-18-2012, 01:11 PM	#2 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 30	Confirmed that I will be heading to houston on Thursday if we can work out a picked-up deal on the intakes __________________ My TT Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Forged Performance: OS Giken Clutches / OS Giken LSD's	Tray@Forged	Drivetrain/Engine	221	04-19-2012 09:51 AM
[FOR SALE] Stillen HFC, Cobb AccessPORT	tribalvisionz	Parts for sale (Private Classifieds)	18	12-29-2011 11:25 PM
COBB Tuning Motorsports Nissan 370Z, Trey Cobb Las Vegas Recap	COBB Tuning	Track / Autocross / Drifting / Dragstrip	2	05-04-2010 04:53 PM
Ride with Trey Cobb and the COBB Tuning Motorsports 370Z around Buttonwillow!	COBB Tuning	Track / Autocross / Drifting / Dragstrip	0	04-08-2010 01:29 PM