TT 370z part out

mrcox · 12-27-2017, 08:55 PM

I'm parting out my TT 2009 370z sport. The turbo kit has been sold and now I'm selling off the rest of the parts. Most of the parts have less than 5,000 miles unless noted.
All pictures can be found Here

Syvecs S6 plus Plug and play ecu for 370z. Includes ecu, jumper harness, and fuel pressure sensor. Everything needed to make it run. Have full VVEL and complete control of the engine with proper logging, launch and traction control, and boost control plus so much more.
$3,500 plus shipping and paypal

Technocraft T2 seats, one large and one regular, with bases and sliders, and schroth harnesses. Drivers suede shows a little wear, but would clean up.
$3,500 plus shipping and paypal

Belak 15x11" Beadlock wheels with Mickey Thompson 325/50-15 drag radials and 15x10.5w slicks (unmounted) and associated hardware to run them which includes spacers, lug nuts, modified SPL camber arms, wheel bearings with ARP extended studs, and custom made traction arms. Now will include the 350z base calipers, rotors, and lines AND front skinnies using a pair of oem spare wheels and M&H 28" front runners, oem lugnuts.
$4,000 plus shipping and paypal for everything!

09 OEM GTR 20" front wheels with Hankook 255-20 RS-3's, Wheels have some scratches but in good shape.
$400 plus shipping and paypal

Mishimoto radiator for manual transmission.
$300 plus shipping and paypal

Powder coated front cover with upper radiator neck.
$300 plus shipping and paypal

Z1 2 piece front rotors.
Sold!

SPL front upper control arms. Great shape.
Sold!

Complete return fuel system. Includes modified oem fuel pump housing with CJM feed to return conversion, New Walbro 485 fuel pump, -8an feed line with Fuel Lab 6 micron fuel filter and check valve, CJM FPD fuel rails, Aeromotive fuel pressure regulator, ECA sensor, -6an return line from engine to factory feed line, and all wiring. I can add the ECA display and harness for $150
Sold!

Manley standard bore pistons with rings and upgraded pins. Custom made from the GTR forgings.
Sold!

ID1700x injectors with pnp adapters for 370z fitment. Worked great but I can send them out for inspection before purchase for an extra charge.
Sold!

Fast Intentions 3" catback with 18" resonators. Also includes muffler delete/turn downs. Great shape, no major scrapes. Will need new gaskets.
Sold!

Tilton Triple plate clutch with tilton hydraulic release bearing, all needed lines with quick disconnect, and AASCO flywheel.
Sold!

DSS Pro level rear axles.
Sold!

OEM manual Sport rear diff housing with Quaife LSD installed, SPL solid bushings, Greddy rear cover, and modified axle stubs for Quaife. It makes some noise since it was built, about 500 miles, I think the run out isn't right. May need new ring and pinion but isn't producing a lot metal shavings on magnet.
Sold!

RJM VHR Closed deck block. Used block but hasn't been used since the close deck job. Standard bore.
Sold!

Varrstoen ES2 18x10.5 +15 rear two wheels only in matte black with Mickey Thompson 345/40-18 drag radials. Tires almost to wear bars, but still good to go.
Sold!

KW V3 coilovers. No leaks or major problems, just the LR dust cover is broken. I purchased used so unsure of mileage and doesn't have the tool kit but I have the spanner wrench.
Sold!

Please add for shipping and PayPal fees! Everything will go out Via UPS with a tracking number. You can contact me by phone by texting at 479 387 2009. Between 8am and 5pm CST is best to text me because I am at work. I can get you any pictures you want. Thanks!

mrcox · 12-29-2017, 07:57 AM

Bump! Added more pictures to the album.

mrcox · 12-30-2017, 10:30 AM

Bump!

ReflectingG0d · 12-30-2017, 11:22 PM

I think I saw pics of this car from TX2k. How did that wheel setup do for you? How much power were you putting down?

mrcox · 01-01-2018, 09:12 AM

I never really used it for its full potential. But, for what it's worth, I've used this exact setup on the rear of a gtr and they are the best you can get before cutting the rear fender up for bigger tires.

JCarter370z · 01-01-2018, 06:49 PM

What gauge set up were you running?

baesic · 01-01-2018, 07:09 PM

Any pictures of the car?

Memphis370Z · 01-01-2018, 07:25 PM

Quote:

Originally Posted by baesic

Any pictures of the car?

TT 370z for sale CHEAP! Very motivated!

mrcox · 01-01-2018, 08:04 PM

Quote:

Originally Posted by JCarter370z

What gauge set up were you running?

I had a Motec C125.

mrcox · 01-02-2018, 12:21 PM

Bump!

NextLevel · 01-02-2018, 01:13 PM

quality parts, glws!

mrcox · 01-03-2018, 07:05 AM

Bump!

mrcox · 01-04-2018, 12:18 PM

Bump!

mrcox · 01-05-2018, 02:18 PM

Bump!

aireoh · 01-06-2018, 02:45 AM

well, i'm in the market for a motor ready to drop in.

12-27-2017, 08:55 PM	#1 (permalink)
mrcox Base Member Join Date: Oct 2014 Location: Dallas, TX Posts: 187 Drives: 09 370z, 10 Prius Rep Power: 10	(NEW BLOW OUT PRICES!)TT 370z part out I'm parting out my TT 2009 370z sport. The turbo kit has been sold and now I'm selling off the rest of the parts. Most of the parts have less than 5,000 miles unless noted. All pictures can be found Here Syvecs S6 plus Plug and play ecu for 370z. Includes ecu, jumper harness, and fuel pressure sensor. Everything needed to make it run. Have full VVEL and complete control of the engine with proper logging, launch and traction control, and boost control plus so much more. $3,500 plus shipping and paypal Technocraft T2 seats, one large and one regular, with bases and sliders, and schroth harnesses. Drivers suede shows a little wear, but would clean up. $3,500 plus shipping and paypal Belak 15x11" Beadlock wheels with Mickey Thompson 325/50-15 drag radials and 15x10.5w slicks (unmounted) and associated hardware to run them which includes spacers, lug nuts, modified SPL camber arms, wheel bearings with ARP extended studs, and custom made traction arms. Now will include the 350z base calipers, rotors, and lines AND front skinnies using a pair of oem spare wheels and M&H 28" front runners, oem lugnuts. $4,000 plus shipping and paypal for everything! 09 OEM GTR 20" front wheels with Hankook 255-20 RS-3's, Wheels have some scratches but in good shape. $400 plus shipping and paypal Mishimoto radiator for manual transmission. $300 plus shipping and paypal Powder coated front cover with upper radiator neck. $300 plus shipping and paypal Z1 2 piece front rotors. Sold! SPL front upper control arms. Great shape. Sold! Complete return fuel system. Includes modified oem fuel pump housing with CJM feed to return conversion, New Walbro 485 fuel pump, -8an feed line with Fuel Lab 6 micron fuel filter and check valve, CJM FPD fuel rails, Aeromotive fuel pressure regulator, ECA sensor, -6an return line from engine to factory feed line, and all wiring. I can add the ECA display and harness for $150 Sold! Manley standard bore pistons with rings and upgraded pins. Custom made from the GTR forgings. Sold! ID1700x injectors with pnp adapters for 370z fitment. Worked great but I can send them out for inspection before purchase for an extra charge. Sold! Fast Intentions 3" catback with 18" resonators. Also includes muffler delete/turn downs. Great shape, no major scrapes. Will need new gaskets. Sold! Tilton Triple plate clutch with tilton hydraulic release bearing, all needed lines with quick disconnect, and AASCO flywheel. Sold! DSS Pro level rear axles. Sold! OEM manual Sport rear diff housing with Quaife LSD installed, SPL solid bushings, Greddy rear cover, and modified axle stubs for Quaife. It makes some noise since it was built, about 500 miles, I think the run out isn't right. May need new ring and pinion but isn't producing a lot metal shavings on magnet. Sold! RJM VHR Closed deck block. Used block but hasn't been used since the close deck job. Standard bore. Sold! Varrstoen ES2 18x10.5 +15 rear two wheels only in matte black with Mickey Thompson 345/40-18 drag radials. Tires almost to wear bars, but still good to go. Sold! KW V3 coilovers. No leaks or major problems, just the LR dust cover is broken. I purchased used so unsure of mileage and doesn't have the tool kit but I have the spanner wrench. Sold! Please add for shipping and PayPal fees! Everything will go out Via UPS with a tracking number. You can contact me by phone by texting at 479 387 2009. Between 8am and 5pm CST is best to text me because I am at work. I can get you any pictures you want. Thanks! andy_meng1024, SS_Firehawk, Hotrodz and 1 others like this. Last edited by mrcox; 10-08-2018 at 01:02 PM.

01-01-2018, 07:09 PM	#7 (permalink)
baesic Base Member Join Date: Sep 2015 Location: Texas Posts: 44 Drives: 2015 Nissan 370Z Rep Power: 9	Any pictures of the car? __________________ '15 370Z \| AAM Short Tails \| ART Test Pipe \| Meisterschaft Midpipe \| STILLEN Cold Air Intake \| JDM Rear Fog Light

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] BIG PART OUT!!!! TT 40th Anniversary carbon fiber body Z part out	Cpt. Obvious	Parts for sale (Private Classifieds)	20	07-18-2017 11:45 AM
[FOR SALE] Big TT 370Z part out! Pics in profile album "part out"	Cpt. Obvious	Parts for sale (Private Classifieds)	37	01-14-2016 11:52 PM
[FOR SALE] Selling Borla 370Z 09-14 Cat-Back Exhaust S-Type part #140313 and 370z trunk cover	KingRich	Parts for sale (Private Classifieds)	0	06-02-2015 07:31 PM
[FOR SALE] 370z part out	ddpilot	Parts for sale (Private Classifieds)	14	03-16-2014 10:13 PM
[FOR SALE] 370Z Part out!!	Chrono_30	Parts for sale (Private Classifieds)	31	02-25-2012 11:36 AM

12-29-2017, 07:57 AM	#2 (permalink)
mrcox Base Member Join Date: Oct 2014 Location: Dallas, TX Posts: 187 Drives: 09 370z, 10 Prius Rep Power: 10	Bump! Added more pictures to the album.

12-30-2017, 10:30 AM	#3 (permalink)
mrcox Base Member Join Date: Oct 2014 Location: Dallas, TX Posts: 187 Drives: 09 370z, 10 Prius Rep Power: 10	Bump!

12-30-2017, 11:22 PM	#4 (permalink)
ReflectingG0d Base Member Join Date: Feb 2014 Location: Denver, CO Posts: 125 Drives: 2013 370z TT Rep Power: 11	I think I saw pics of this car from TX2k. How did that wheel setup do for you? How much power were you putting down?

01-01-2018, 09:12 AM	#5 (permalink)
mrcox Base Member Join Date: Oct 2014 Location: Dallas, TX Posts: 187 Drives: 09 370z, 10 Prius Rep Power: 10	I never really used it for its full potential. But, for what it's worth, I've used this exact setup on the rear of a gtr and they are the best you can get before cutting the rear fender up for bigger tires.

01-01-2018, 06:49 PM	#6 (permalink)
JCarter370z Base Member Join Date: Dec 2014 Location: North Carolina Posts: 114 Drives: 2012 370z Rep Power: 10	What gauge set up were you running?

01-02-2018, 12:21 PM	#10 (permalink)
mrcox Base Member Join Date: Oct 2014 Location: Dallas, TX Posts: 187 Drives: 09 370z, 10 Prius Rep Power: 10	Bump!

01-02-2018, 01:13 PM	#11 (permalink)
NextLevel Banned Join Date: Apr 2017 Location: Midwest Posts: 108 Drives: Motorweek#0021 Nismo Rep Power: 0	quality parts, glws!

01-03-2018, 07:05 AM	#12 (permalink)
mrcox Base Member Join Date: Oct 2014 Location: Dallas, TX Posts: 187 Drives: 09 370z, 10 Prius Rep Power: 10	Bump!

01-04-2018, 12:18 PM	#13 (permalink)
mrcox Base Member Join Date: Oct 2014 Location: Dallas, TX Posts: 187 Drives: 09 370z, 10 Prius Rep Power: 10	Bump!

01-05-2018, 02:18 PM	#14 (permalink)
mrcox Base Member Join Date: Oct 2014 Location: Dallas, TX Posts: 187 Drives: 09 370z, 10 Prius Rep Power: 10	Bump!

01-06-2018, 02:45 AM	#15 (permalink)
aireoh Base Member Join Date: Jan 2016 Location: Yuma, Arionza Posts: 32 Drives: 2012 370Z Base 6mt Rep Power: 9	well, i'm in the market for a motor ready to drop in.