TT 370z part out

mrcox

I'm parting out my TT 2009 370z sport. The turbo kit has been sold and now I'm selling off the rest of the parts. Most of the parts have less than 5,000 miles unless noted.
All pictures can be found Here

Syvecs S6 plus Plug and play ecu for 370z. Includes ecu, jumper harness, and fuel pressure sensor. Everything needed to make it run. Have full VVEL and complete control of the engine with proper logging, launch and traction control, and boost control plus so much more.
$3,500 plus shipping and paypal

Technocraft T2 seats, one large and one regular, with bases and sliders, and schroth harnesses. Drivers suede shows a little wear, but would clean up.
$3,500 plus shipping and paypal

Belak 15x11" Beadlock wheels with Mickey Thompson 325/50-15 drag radials and 15x10.5w slicks (unmounted) and associated hardware to run them which includes spacers, lug nuts, modified SPL camber arms, wheel bearings with ARP extended studs, and custom made traction arms. Now will include the 350z base calipers, rotors, and lines AND front skinnies using a pair of oem spare wheels and M&H 28" front runners, oem lugnuts.
$4,000 plus shipping and paypal for everything!

09 OEM GTR 20" front wheels with Hankook 255-20 RS-3's, Wheels have some scratches but in good shape.
$400 plus shipping and paypal

Mishimoto radiator for manual transmission.
$300 plus shipping and paypal

Powder coated front cover with upper radiator neck.
$300 plus shipping and paypal

Z1 2 piece front rotors.
Sold!

SPL front upper control arms. Great shape.
Sold!

Complete return fuel system. Includes modified oem fuel pump housing with CJM feed to return conversion, New Walbro 485 fuel pump, -8an feed line with Fuel Lab 6 micron fuel filter and check valve, CJM FPD fuel rails, Aeromotive fuel pressure regulator, ECA sensor, -6an return line from engine to factory feed line, and all wiring. I can add the ECA display and harness for $150
Sold!

Manley standard bore pistons with rings and upgraded pins. Custom made from the GTR forgings.
Sold!

ID1700x injectors with pnp adapters for 370z fitment. Worked great but I can send them out for inspection before purchase for an extra charge.
Sold!

Fast Intentions 3" catback with 18" resonators. Also includes muffler delete/turn downs. Great shape, no major scrapes. Will need new gaskets.
Sold!

Tilton Triple plate clutch with tilton hydraulic release bearing, all needed lines with quick disconnect, and AASCO flywheel.
Sold!

DSS Pro level rear axles.
Sold!

OEM manual Sport rear diff housing with Quaife LSD installed, SPL solid bushings, Greddy rear cover, and modified axle stubs for Quaife. It makes some noise since it was built, about 500 miles, I think the run out isn't right. May need new ring and pinion but isn't producing a lot metal shavings on magnet.
Sold!

RJM VHR Closed deck block. Used block but hasn't been used since the close deck job. Standard bore.
Sold!

Varrstoen ES2 18x10.5 +15 rear two wheels only in matte black with Mickey Thompson 345/40-18 drag radials. Tires almost to wear bars, but still good to go.
Sold!

KW V3 coilovers. No leaks or major problems, just the LR dust cover is broken. I purchased used so unsure of mileage and doesn't have the tool kit but I have the spanner wrench.
Sold!


Please add for shipping and PayPal fees! Everything will go out Via UPS with a tracking number. You can contact me by phone by texting at 479 387 2009. Between 8am and 5pm CST is best to text me because I am at work. I can get you any pictures you want. Thanks!