Next generation Honda NSX..

90 ST

Depends where it comes in on price, if it's 20K less then a GT-R...

FL 4Motion

IF this new nsx comes in at a 60 to 70K price point, i could see this selling, but it's performance is still going to leave a lot to be desired when you start looking at similarly priced cars -- GT500, C6/C7 vette etc.

R8 copy or not, I think that rendering looks good, but it's just going to be too far down on power/performance for what I'm expecting them to really charge for it (80-100K) to ever consider it.

90 ST

[QUOTE=FL 4Motion;1472644]IF this new nsx comes in at a 60 to 70K price point, i could see this selling, but it's performance is still going to leave a lot to be desired when you start looking at similarly priced cars -- GT500, C6/C7 vette etc.QUOTE]

True, the 20k less would put it into even more compition as you mentioned...well nevermind then. At least it looks not too bad.

FL 4Motion

[QUOTE=90 ST;1472910]If it was at least 500hp and came in at around 100K, it'd be a hit I think, to be taken seriously nowadays in the supercar world, you NEED to be packing at least 500hp. Anything less and you're just a plain jane sports car and there's plenty of those around for a lot less coin. (exception to the rule: lotus type cars that are super duper lightweight and can get away with less hp).

90 ST

[QUOTE=FL 4Motion;1472919]Yeah 500 min, and under 3300LBS. with the right price.

gomer_110

For the record the faulty component that caused the stuck throttle was designed and manufactured by an AMERICAN company. The Denso made components for the Japanese manufactured cars were never a problem just the US made ones. FWIW

[QUOTE=90 ST;1472927]Depending on how the hybrid system is implemented this magic 500 hp may not be as bad as it sounds. If they use electric motors to actually drive the wheels then that's gonna be one hell of a flat torque curve.

__________________
'11 370Z Nismo #528 Fast Intentions | Stillen | Motordyne | Uprev | CSF | Zspeed | Z1 Motorsports | AST | Swift | SPC | SPL | Whiteline | Hotchkis | Bride | Schroth | Robispec | Cusco | Nismo | Volk | Forgestar | Hoosier | RJM
'17 Titan Bone Stock

ImportConvert

If it weighs 2700# it will be fine. Remember, the original NSX set some records for construction/weight. Further, consider the quality.

FL 4Motion

/\ oh no doubt. I just am a bit skeptical about it being a super lightweight car since they stated hybrid tech in there. Now, to get that super lightweight and still be a hybrid, they it will probably be more like a 150-200K car.

yeah, I still love the old NSXs, a timeless car imo.

Pharmacist

unlikely it will weigh anywhere near that unless it was the size of a tin can, or a lotus elise, not that there's much difference between them

The other alternative is using exotic materials, mainly carbon fibre. but that will price it right out of the market, unless honda is willing to eat up a huge loss on each car. Even then it still won't meet that weight target. The mp 4-12c also uses extensive carbon fibre structures in its frame, yet still weighs a bit over 3000 pounds.

__________________
2009 370z Sport Touring/Nismo shift Knob/Z1 motorsports 34 row oil cooler

Fastfatdude

well, if its gonna be Honda's finest after such a long time, i doubt if it will be priced lower than a GTR. at least not where i come from... Singapore.

should be looking at easily USD300k when it arrives here..

oh well, way out of my price range..

__________________

Isamu

true, but you live in an awesome place!

__________________

黒子 ('Kuroko')
Project: SuperNova Owner/Operator and Lead designer @BlackGuard Aeroworks

Fastfatdude

Not too bad, cept for cost of living..

__________________