Need Help? Let me know!

bigaudiofanat · 11-01-2012, 06:25 PM

Quote:

Originally Posted by AlphaSnacks

Matt...weird request. Can you help me with a 2012 Jaguar XF? I want to install a small sub in the back. A 6" sub would more than suffice or a pre-powered sub such as this (similar to the 370Z's sub):

Blaupunkt 6902A GT Power Series dual 6"x9" powered subwoofer at Crutchfield.com

I found this thread on the Jag forum where someone installed a pair of subs and posted the details:
Anybody have any wiring diagrams or location for amplifier for the audio system.... - Jaguar Forums - Jaguar Enthusiasts Forum

The car's standard audio has terrific highs, and good mids. But bass is poor and I'd like to alleviate that with something very simple. Would a sub that small require its own amp? I sort of doubt it does, but I don't know crap.

If your looking for something to add bass, I would look at a small sub in a sealed box and a separate amp, the one your looking at will not do much as far as quality bass.

speedracer007 · 10-30-2012, 10:31 AM

2 questions for you Matt:

1) How hard is it to install a bluetooth mic in the stock factory location?
2) I have the Homelink mirror with the backup camera. If I get a new HU, can I wire the backup camera to display on it, instead of the mirror?

bigaudiofanat · 10-31-2012, 10:17 AM

Quote:

Originally Posted by speedracer007

2 questions for you Matt:

1) How hard is it to install a bluetooth mic in the stock factory location?
2) I have the Homelink mirror with the backup camera. If I get a new HU, can I wire the backup camera to display on it, instead of the mirror?

Installing a aftermarket mic in the factory location is not that hard, just take your time as working in a small space above your head is stressful.

You can tap into the factory video signals and run a cable to our new head unit. I think someone posted the wiring diagram for the harness of the mirror. I just can not remember where.

fairladyZ34 · 10-30-2012, 08:39 PM

pm'd

bigaudiofanat · 10-31-2012, 10:19 AM

Hello everyone, my name is Matt, I have been an installer for 8 years now. My audio installs is a part time side job, however I work as a I.T. guy. We got our new van a few weeks ago and the stock system was not cutting it for me.

Stage 1 Head unit install

I decided to go with something that could give me expandability and features but also not something that would blow the budget. The JVC KW-R900BT fit the bill nicely. I am a alpine guy all day and kenwood is a close runner up, but I decided to step out of my comfort zone on this one and go with a different brand all together.

On to the pictures.

Few of the parts

Ran the mic on top of the A pillar, no problem with echo or noise.

As I do all my work, I soldered and marine grade heat shrunk all the wires, sadly I was in a rush and did not take a picture of this.

Wires ready to go.

Routed the USB #2 port to the glove box, very simple to do.

Head unit installed in the metra dash kit.

Installed with trim ring

bigaudiofanat · 10-31-2012, 11:15 AM

2008 VW Passat

Before

All wires soldered and heat shrunk

After

eastwest2300 · 10-31-2012, 11:31 AM

Matt, I was checking out the install pics, very nice work man! I wish you lived closer, I really need a couple alarms done... damn! ughhhhh

bigaudiofanat · 11-01-2012, 06:25 PM

Quote:

Originally Posted by eastwest2300

Matt, I was checking out the install pics, very nice work man! I wish you lived closer, I really need a couple alarms done... damn! ughhhhh

I am up for a drive, it would probably be a weekend install but PM me!

AlphaSnacks · 10-31-2012, 01:04 PM

Hey Matt, did you happen to see my post a few posts before yours?

bigaudiofanat · 11-11-2012, 05:13 PM

Pictures are now up of a full detail on a 2012 Nissan Altima.

http://bigaudiofanatic.com/gallery.a...+Silver+Detail

Few teaser pictures

logenl7 · 01-10-2013, 12:09 PM

Hey bud, I have a sport+touring, and I wanna upgrade my system... I already have (uninstalled) a 13TW5v3 and a Wicked C.A.S. enclosure... I also have a JL HD900.5 amp.. I'm stuck when it comes to speakers... I honestly dont know my speaker size, or what I need to do next. I've heard I have to rip out all the Bose wires and get a new head unit. If you could give me some insight or even a phone call to point me in the right direction for the speakers I need to get and what to do next, I would greatly appreciate it... Thank you!!

Symptotic · 01-10-2013, 02:41 PM

Hello big,

I have a base model 370 Z and would like to upgrade the system. I was wondering you could point me in the right direction. I have ordered a Kenwood 6990hd, and am planning on doing the install myself. The problem I have is I do not know much about components. I have a budget of $ $400-$700. Can you give me some component suggestions? I’m curious what you would do given this budget.

I listen to a variety of music from metal, rap, jazz, and classical. I like the idea of adding a sub, but I don’t know if I should upgrade the door speakers and do 1 amp to power everything.

Thanks for your advice.

bigaudiofanat · 01-28-2013, 11:40 AM

The owner contacted me asking for a clean basic stereo install. Nothing crazy but he did want a little flare to it. I went ahead and put together an idea and went to work.

Equipment

Custom Autosound Secret Audio SST
CD Changer
Alpine Type S 6.5 Components
Alpine Type S 6X9 Coaxial's
KnuKonceptz 16 gauge wire

As always wires soldered and marine grade heat shrunk.

Harness organized and wired

The CD changer was mounted using aluminum brackets secured to the back lip of the rear wall.

Pre made kick panels were not deep enough for the woofers, nor did they have a cut out for a tweeter. Spacers were made and will later be routed and painted, fallowed by upholstery.

A new dash was made (not by myself) and the display was installed.

A bracket was made to install the brain as well on the back wall. The one strip going along the back wall has a gap behind it and worked well as a place to secure everything without going through the wall.

bigaudiofanat · 01-28-2013, 11:42 AM

The customer did want rear speakers so I made a set of basic boxes and mounted them level and flat, as the back wall is actually angled back.

A template was made for the beauty panel.

The actually panel, it will later be wrapped. Still need to add the plexiglass and logo.

3R4I3P · 02-27-2013, 10:20 AM

Quote:

Originally Posted by bigaudiofanat

Hello, my name is Matt. I have been doing installs for about 8 years now and enjoy helping people if they have questions. Please feel free to ask. My aim and yahoo messenger is reimermatt. No question is to stupid to get answered. I will also post my work here as well.

What's up Matt? I live in Staten Island NY. Your best opinion for an Aftermarket Radio/Nav/DVD System. I have a 2011 Nissan 370z Sport with base radio. It has 2 tweeters and 2 Mids on Doors. No Rear Speakers. Thx in advance!
Keith

10-30-2012, 08:39 PM	#4 (permalink)
fairladyZ34 A True Z Fanatic Join Date: Aug 2009 Location: Central NJ Posts: 1,577 Drives: 08 G37S Black M6 Rep Power: 20	pm'd __________________ From Z to G to BMW and back to a G! Nismo for life

10-31-2012, 10:19 AM	#5 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Hello everyone, my name is Matt, I have been an installer for 8 years now. My audio installs is a part time side job, however I work as a I.T. guy. We got our new van a few weeks ago and the stock system was not cutting it for me. Stage 1 Head unit install I decided to go with something that could give me expandability and features but also not something that would blow the budget. The JVC KW-R900BT fit the bill nicely. I am a alpine guy all day and kenwood is a close runner up, but I decided to step out of my comfort zone on this one and go with a different brand all together. On to the pictures. Few of the parts Ran the mic on top of the A pillar, no problem with echo or noise. As I do all my work, I soldered and marine grade heat shrunk all the wires, sadly I was in a rush and did not take a picture of this. Wires ready to go. Routed the USB #2 port to the glove box, very simple to do. Head unit installed in the metra dash kit. Installed with trim ring __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/ Last edited by bigaudiofanat; 10-31-2012 at 10:23 AM.

10-31-2012, 11:15 AM	#6 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	2008 VW Passat Before All wires soldered and heat shrunk After __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

10-31-2012, 11:31 AM	#7 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 91,035 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684553	Matt, I was checking out the install pics, very nice work man! I wish you lived closer, I really need a couple alarms done... damn! ughhhhh __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

11-11-2012, 05:13 PM	#10 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Pictures are now up of a full detail on a 2012 Nissan Altima. http://bigaudiofanatic.com/gallery.a...+Silver+Detail Few teaser pictures __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

10-30-2012, 10:31 AM	#2 (permalink)
speedracer007 Base Member Join Date: Oct 2012 Location: Huntsville, Alabama Posts: 119 Drives: 2013 Nissan 370Z Rep Power: 14	2 questions for you Matt: 1) How hard is it to install a bluetooth mic in the stock factory location? 2) I have the Homelink mirror with the backup camera. If I get a new HU, can I wire the backup camera to display on it, instead of the mirror?

10-31-2012, 01:04 PM	#9 (permalink)
AlphaSnacks A True Z Fanatic Join Date: Jan 2010 Location: Windermere, FL Posts: 1,618 Drives: '13 XKR-S, '10 370Z Rep Power: 20	Hey Matt, did you happen to see my post a few posts before yours?

01-10-2013, 12:09 PM	#11 (permalink)
logenl7 Enthusiast Member Join Date: Sep 2012 Location: Marysville Ohio Age: 39 Posts: 357 Drives: 09 Nissan 370Z 6M Rep Power: 14	Hey bud, I have a sport+touring, and I wanna upgrade my system... I already have (uninstalled) a 13TW5v3 and a Wicked C.A.S. enclosure... I also have a JL HD900.5 amp.. I'm stuck when it comes to speakers... I honestly dont know my speaker size, or what I need to do next. I've heard I have to rip out all the Bose wires and get a new head unit. If you could give me some insight or even a phone call to point me in the right direction for the speakers I need to get and what to do next, I would greatly appreciate it... Thank you!!

01-10-2013, 02:41 PM	#12 (permalink)
Symptotic Base Member Join Date: May 2012 Location: Houston TX Posts: 1 Drives: 2012 370z Blue M6 Rep Power: 14	Help needed Hello big, I have a base model 370 Z and would like to upgrade the system. I was wondering you could point me in the right direction. I have ordered a Kenwood 6990hd, and am planning on doing the install myself. The problem I have is I do not know much about components. I have a budget of $ $400-$700. Can you give me some component suggestions? I’m curious what you would do given this budget. I listen to a variety of music from metal, rap, jazz, and classical. I like the idea of adding a sub, but I don’t know if I should upgrade the door speakers and do 1 amp to power everything. Thanks for your advice.

01-28-2013, 11:40 AM	#13 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	The owner contacted me asking for a clean basic stereo install. Nothing crazy but he did want a little flare to it. I went ahead and put together an idea and went to work. Equipment Custom Autosound Secret Audio SST CD Changer Alpine Type S 6.5 Components Alpine Type S 6X9 Coaxial's KnuKonceptz 16 gauge wire As always wires soldered and marine grade heat shrunk. Harness organized and wired The CD changer was mounted using aluminum brackets secured to the back lip of the rear wall. Pre made kick panels were not deep enough for the woofers, nor did they have a cut out for a tweeter. Spacers were made and will later be routed and painted, fallowed by upholstery. A new dash was made (not by myself) and the display was installed. A bracket was made to install the brain as well on the back wall. The one strip going along the back wall has a gap behind it and worked well as a place to secure everything without going through the wall. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

01-28-2013, 11:42 AM	#14 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	The customer did want rear speakers so I made a set of basic boxes and mounted them level and flat, as the back wall is actually angled back. A template was made for the beauty panel. The actually panel, it will later be wrapped. Still need to add the plexiglass and logo. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/