Rear Tone Ring # of teeth?

RadioFlyer · 07-19-2016, 06:42 PM

Just to follow up on this thread, if it helps anybody... Yes, there IS a difference in tone rings used in these cars. The two I came across are 46 and 48 teeth on the tone rings. There may be more variations. But what I did was pop the axle stub off the diff and swap it with one of the axle stubs from my stock core so the diff going into the car has two 48-tooth tone rings. It works fine now, and there doesn't seem to be any problems with swapping it out. Here are pictures of the side of the tone ring where it has the number of teeth stamped into the metal.

So, just an FYI for anyone doing swaps, look for this number on the side of the tone rings and make sure they match before you complete your assembly.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Replicate this Exhaust tone	genesis2012	Intake/Exhaust	13	01-25-2014 10:09 AM
Exhaust Tone (Ark, FI, Invidia)	asdfsammich	Intake/Exhaust	5	09-10-2012 08:41 PM
exhaust tone in person	svt to 370z	Intake/Exhaust	23	01-23-2012 01:44 AM
Anyone two tone there rims?	MB_Z	Wheels & Tires	7	10-20-2011 02:21 PM
Getting my lower wisdom teeth removed tomorrow!	AK370Z	The Lounge (Off Topic)	79	05-18-2010 11:23 PM

07-19-2016, 06:42 PM	#3 (permalink)
RadioFlyer Base Member Join Date: Aug 2014 Location: Los Angeles, CA. Posts: 193 Drives: 08 G37S S/C Rep Power: 41	Just to follow up on this thread, if it helps anybody... Yes, there IS a difference in tone rings used in these cars. The two I came across are 46 and 48 teeth on the tone rings. There may be more variations. But what I did was pop the axle stub off the diff and swap it with one of the axle stubs from my stock core so the diff going into the car has two 48-tooth tone rings. It works fine now, and there doesn't seem to be any problems with swapping it out. Here are pictures of the side of the tone ring where it has the number of teeth stamped into the metal. So, just an FYI for anyone doing swaps, look for this number on the side of the tone rings and make sure they match before you complete your assembly.