Rear Tone Ring # of teeth?

RadioFlyer · 07-11-2016, 08:11 PM

I just ordered a built diff from Z1. It has the LSD in it, and everything looks fine, but I was inspecting the parts on it, since it comes built in a used housing. I counted the teeth on the tone rings, and they are a different number on the right and left side axle stubs. The right side tone ring has 46 teeth, while the left side has 48 teeth. I counted the teeth on the stock diff that I pulled off the car, and it has 48 on each side. So The right side tone ring on the Z1 diff is clearly the wrong one, but would a two-tooth difference cause any issues? I don't mind if it's the wrong part as long as it doesn't cause problems with the ABS, VDC, or EBD systems. Anyone have any input? Thanks in advance!

DEpointfive0 · 07-12-2016, 02:00 AM

Hmmmmmmm... I assume one is from a 350Z and one from a 370 maybe?

I'd call them up

RadioFlyer · 07-19-2016, 06:42 PM

Just to follow up on this thread, if it helps anybody... Yes, there IS a difference in tone rings used in these cars. The two I came across are 46 and 48 teeth on the tone rings. There may be more variations. But what I did was pop the axle stub off the diff and swap it with one of the axle stubs from my stock core so the diff going into the car has two 48-tooth tone rings. It works fine now, and there doesn't seem to be any problems with swapping it out. Here are pictures of the side of the tone ring where it has the number of teeth stamped into the metal.

So, just an FYI for anyone doing swaps, look for this number on the side of the tone rings and make sure they match before you complete your assembly.

07-11-2016, 08:11 PM	#1 (permalink)
RadioFlyer Base Member Join Date: Aug 2014 Location: Los Angeles, CA. Posts: 193 Drives: 08 G37S S/C Rep Power: 39	Rear Tone Ring # of teeth? I just ordered a built diff from Z1. It has the LSD in it, and everything looks fine, but I was inspecting the parts on it, since it comes built in a used housing. I counted the teeth on the tone rings, and they are a different number on the right and left side axle stubs. The right side tone ring has 46 teeth, while the left side has 48 teeth. I counted the teeth on the stock diff that I pulled off the car, and it has 48 on each side. So The right side tone ring on the Z1 diff is clearly the wrong one, but would a two-tooth difference cause any issues? I don't mind if it's the wrong part as long as it doesn't cause problems with the ABS, VDC, or EBD systems. Anyone have any input? Thanks in advance!

07-12-2016, 02:00 AM	#2 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Hmmmmmmm... I assume one is from a 350Z and one from a 370 maybe? I'd call them up __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Replicate this Exhaust tone	genesis2012	Intake/Exhaust	13	01-25-2014 10:09 AM
Exhaust Tone (Ark, FI, Invidia)	asdfsammich	Intake/Exhaust	5	09-10-2012 08:41 PM
exhaust tone in person	svt to 370z	Intake/Exhaust	23	01-23-2012 01:44 AM
Anyone two tone there rims?	MB_Z	Wheels & Tires	7	10-20-2011 02:21 PM
Getting my lower wisdom teeth removed tomorrow!	AK370Z	The Lounge (Off Topic)	79	05-18-2010 11:23 PM

07-19-2016, 06:42 PM	#3 (permalink)
RadioFlyer Base Member Join Date: Aug 2014 Location: Los Angeles, CA. Posts: 193 Drives: 08 G37S S/C Rep Power: 39	Just to follow up on this thread, if it helps anybody... Yes, there IS a difference in tone rings used in these cars. The two I came across are 46 and 48 teeth on the tone rings. There may be more variations. But what I did was pop the axle stub off the diff and swap it with one of the axle stubs from my stock core so the diff going into the car has two 48-tooth tone rings. It works fine now, and there doesn't seem to be any problems with swapping it out. Here are pictures of the side of the tone ring where it has the number of teeth stamped into the metal. So, just an FYI for anyone doing swaps, look for this number on the side of the tone rings and make sure they match before you complete your assembly.