Project: 2010 solid red roadster

DeusExMaxima

I have some parts coming in....a carbon fiber M45 shift knob and the H pipe and B (mid) pipe from a 370Z nismo. I may run it without the muffler, with stock muffler, or with rear resonators. I don't mind a bit more noise thsn stock, but not into the racket that some of these cars make. Also thinking of installing my gunmetal square set of 350Z Track rims. They look great and weigh 18.6 lbs. I'm not sure the offset will work with the 370z. Anyone try 350z rims on?

cv129

See below.

350z nismo wheels on 370z?

Those are great wheels, too bad it’s a little narrow for z34. There was an OG member here using a widened (cut, widened, welded) version of those wheels on his track used Z34.

__________________
Setrab | RE-71 | SPL | JRZ | Nismo | ARK | Whiteline | RacingBrake | CJM Oil Pan | Ti shield

DeusExMaxima

Seems like spacers would work for offset. My Track edition wheels are a square set so the front would likely be ok. The rears would probably need about 20mm of offset.

I got my Nismo B pipe and h pipe installed, with no resonators. It is louder than expected but not bad. It only gets loud at higher RPMs and if you mash the gas pedal. The general consensus is that this gives about 9-10 hp and the other hp of the Nismo is due to a tune. I plan to do a YouTube video so you can hear the sound.