Hard Top Option...

blueranger · 09-11-2017, 10:28 PM

Quote:

Originally Posted by SOUTHZZ

I think blueranger is doing the right thing.
Do not show a pic of a project until it is
in finished form.
I've found that many people just do not have the
sense of vision of what the it takes to complete a project.
Showing an incomplete will turn them off.
Another thread(hood vents)shares a similar plight.
Show the vents installed on a hood on a actual Z.

Looking forward to see the finished product.

Thank you...

suzook · 09-19-2017, 12:31 PM

agreed but oh so impatiently waiting

blueranger · 09-22-2017, 11:23 PM

I am still here just emailed manufacturer for an update.

I now have a new issue with my soft Top that will not seal completely at the rear. I have about a 1/4 inch gap that you can see into the car UGH!

Can anyone offer any tips to make it close properly?

I cannot wait for this hard top to be complete and I will rip this entire soft top out of the car!

Let me know if you can help?

Sent from my iPhone using Tapatalk

SOUTHZZ · 09-23-2017, 05:54 AM

Quote:

Originally Posted by blueranger

I am still here just emailed manufacturer for an update.

I now have a new issue with my soft Top that will not seal completely at the rear. I have about a 1/4 inch gap that you can see into the car UGH!

Can anyone offer any tips to make it close properly?

I cannot wait for this hard top to be complete and I will rip this entire soft top out of the car!

Let me know if you can help?

Sent from my iPhone using Tapatalk

I'd think that a quick fix (but not permanent)would be to install a rubber
gasket strip to close the gap.

DocJ · 09-24-2017, 09:51 PM

For that gap, if I'm not mistaken I think that's what the adjustment nuts on each side of the 5th bow are for, is setting the clearance to rest on the lid. Might be worth a try.

blueranger · 09-27-2017, 10:53 PM

Quote:

Originally Posted by DocJ

For that gap, if I'm not mistaken I think that's what the adjustment nuts on each side of the 5th bow are for, is setting the clearance to rest on the lid. Might be worth a try.

It was definitely the rear latch not aligned in the slot. It is now.

SnowXTC · 10-06-2017, 02:41 PM

Did you get an update? Really hoping this is soon

blueranger · 10-09-2017, 09:17 PM

Quote:

Originally Posted by SnowXTC

Did you get an update? Really hoping this is soon

Still waiting... The last update was the "shell" was molded and complete (beautiful piece) but still needed the rear window added, interior finish and possibly the latch system.

I sent an email a week ago asking for updates and I usually get a response as soon as they get to the next stage. Please note they are also developing other tops along with our 370z roadsters.

I will update as soon as I hear

longlivethez · 10-24-2017, 11:34 AM

I'd be interested in this but not because my soft top is broken. Mine actually just got replaced under warranty (and I don't even know why...lol Car didn't even have 10K on the clock and they were like, "we're going to replace it".) so it should be fine for the foreseeable future. I'd be interested in taking out a hundred-ish pounds (or more?) of soft top, controllers, wires, etc but still being able to lose the roof if I wanted to!

littlejuanito · 10-24-2017, 11:49 AM

Lets see which project we get to see first, this hard top, the hood vents or the new Z35...

gbhrps · 10-24-2017, 08:25 PM

blueranger,

The factory service manual for 2016 models (yours may be a different page but the same exact procedure) shows the adjustment to make to close the 5th bow to the storage lid: RF 174 (roof page 174).

There is a lock nut to loosen on each side, and then another nut to turn to get the proper clearance, and then lock down the lock nut.

It should be simple and easy, but take your time and do small adjustments to ensure you don't do any damage. Good Luck!

Gene

blueranger · 10-26-2017, 11:51 PM

Quote:

Originally Posted by gbhrps

blueranger,

The factory service manual for 2016 models (yours may be a different page but the same exact procedure) shows the adjustment to make to close the 5th bow to the storage lid: RF 174 (roof page 174).

There is a lock nut to loosen on each side, and then another nut to turn to get the proper clearance, and then lock down the lock nut.

It should be simple and easy, but take your time and do small adjustments to ensure you don't do any damage. Good Luck!

Gene

Thanks Gene!

Sent from my iPhone using Tapatalk

blueranger · 10-26-2017, 11:56 PM

Quote:

Originally Posted by longlivethez

I'd be interested in this but not because my soft top is broken. Mine actually just got replaced under warranty (and I don't even know why...lol Car didn't even have 10K on the clock and they were like, "we're going to replace it".) so it should be fine for the foreseeable future. I'd be interested in taking out a hundred-ish pounds (or more?) of soft top, controllers, wires, etc but still being able to lose the roof if I wanted to!

You and I think exactly the same!

I am due to check in with the manufacturer to see if they have any updates. I have been tied up drag racing in Denver, Phoenix and locally that I was out of the forums.

Sent from my iPhone using Tapatalk

suzook · 10-30-2017, 09:28 AM

I am starting to think this hard top is going to be a mythical unicorn..... I hope not but.......

blueranger · 10-30-2017, 03:41 PM

Quote:

Originally Posted by suzook

I am starting to think this hard top is going to be a mythical unicorn..... I hope not but.......

Suzook... Thanks for your fast response to my message. I could not remember the forum member that loaned the roadster for this development. Sorry for the misunderstanding.

Get ready for some "Sneak Peek" pictures of this mythical unicorn!

09-22-2017, 11:23 PM	#108 (permalink)
blueranger Track Member Join Date: Aug 2012 Location: Albuquerque NM Posts: 577 Drives: 2010 Roadster 7AT Rep Power: 306	I am still here just emailed manufacturer for an update. I now have a new issue with my soft Top that will not seal completely at the rear. I have about a 1/4 inch gap that you can see into the car UGH! Can anyone offer any tips to make it close properly? I cannot wait for this hard top to be complete and I will rip this entire soft top out of the car! Let me know if you can help? Sent from my iPhone using Tapatalk __________________ F.I. Stage 1 Twin Turbo #48 \| E85 FlexFuel \| Built 7AT \| F.I. 34 Row Oil Cooler \| F.I. Flex Plate \| F.I. 19 row Trans Cooler \| MT ET Street S/S \| ECUTEK Tuned by Seb \| RPM Roll Bar

09-24-2017, 09:51 PM	#110 (permalink)
DocJ Base Member Join Date: Sep 2010 Location: TN Posts: 25 Drives: 10 370zr BS 6MT T/SN Rep Power: 14	For that gap, if I'm not mistaken I think that's what the adjustment nuts on each side of the 5th bow are for, is setting the clearance to rest on the lid. Might be worth a try. gr8-wrx and blueranger like this.

10-06-2017, 02:41 PM	#112 (permalink)
SnowXTC Base Member Join Date: Jun 2017 Location: Montana Posts: 17 Drives: 2010 Nissan 370Z Rep Power: 7	Did you get an update? Really hoping this is soon blueranger likes this.

10-24-2017, 11:34 AM	#114 (permalink)
longlivethez Base Member Join Date: May 2016 Location: Phoenix Posts: 105 Drives: 2014 370Z Roadster Rep Power: 162	I'd be interested in this but not because my soft top is broken. Mine actually just got replaced under warranty (and I don't even know why...lol Car didn't even have 10K on the clock and they were like, "we're going to replace it".) so it should be fine for the foreseeable future. I'd be interested in taking out a hundred-ish pounds (or more?) of soft top, controllers, wires, etc but still being able to lose the roof if I wanted to! blueranger likes this.

10-24-2017, 11:49 AM	#115 (permalink)
littlejuanito Track Member Join Date: Jul 2014 Location: Sherman Oaks, CA Posts: 812 Drives: 2014 Touring Sport Rep Power: 418	Lets see which project we get to see first, this hard top, the hood vents or the new Z35... Jayhovah, JTM88 and Zingston like this.

09-19-2017, 12:31 PM	#107 (permalink)
suzook Base Member Join Date: Nov 2015 Location: Orlando Posts: 39 Drives: Nissan 370Z convert Rep Power: 9	agreed but oh so impatiently waiting

10-24-2017, 08:25 PM	#116 (permalink)
gbhrps Base Member Join Date: Sep 2016 Location: Ontario, Canada Posts: 213 Drives: 2016 RDSTR TS 6spd Rep Power: 7995	blueranger, The factory service manual for 2016 models (yours may be a different page but the same exact procedure) shows the adjustment to make to close the 5th bow to the storage lid: RF 174 (roof page 174). There is a lock nut to loosen on each side, and then another nut to turn to get the proper clearance, and then lock down the lock nut. It should be simple and easy, but take your time and do small adjustments to ensure you don't do any damage. Good Luck! Gene blueranger likes this.

10-30-2017, 09:28 AM	#119 (permalink)
suzook Base Member Join Date: Nov 2015 Location: Orlando Posts: 39 Drives: Nissan 370Z convert Rep Power: 9	I am starting to think this hard top is going to be a mythical unicorn..... I hope not but.......

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hard Left Hard Right Turning Air Bubble?	JrumMusic	Wheels & Tires	9	12-03-2014 10:25 AM
New CAI option	90 ST	Intake/Exhaust	21	03-26-2012 11:26 PM
Best option?	Vinny	Brakes & Suspension	7	12-21-2010 01:18 PM
More option for SSR	Stealth_Z	Wheels & Tires	1	06-14-2010 05:05 PM