Any Roadsters with Spoilers?

RoadsterFun · 09-30-2016, 11:03 PM

Yes, I posted on this roadster forum. I have a couple of pics on my roadsterfun I got it from eBay painted for about $235. Good quality. Makes a huge difference on the look... Breaks it up nicely

ReeceZ · 09-30-2016, 11:49 PM

Great. Thanks axmea?

Have you had issues with fitting/mounting this spoiler?

OldGuyFla · 01-30-2016, 03:52 PM

Quote:

Originally Posted by Jdew72

I didn't drill/screw mine in. Clay barred the area, alcohol swabbed it off and used 3M. Survived the winter plus 140mph on a track in cold weather.

IMG]

Sent from my iPhone using Tapatalk

I hope you will be checking in soon. I would really like to know how your no drill install. is working out.
Thanks
Dan

Spoiler · 02-07-2016, 09:52 AM

I just sent jdew a pm about this also.... My new spoiler is sitting here...

OldGuyFla · 02-08-2016, 10:37 AM

Hi,
I got mine last week & it is on already, not real hard. It took me a day & a half & I was slowed down because I dropped a screw into the trunk cavity & had to get it out.

Dan

Spoiler · 02-10-2016, 08:01 PM

Quote:

Originally Posted by OldGuyFla

Hi,
I got mine last week & it is on already, not real hard. It took me a day & a half & I was slowed down because I dropped a screw into the trunk cavity & had to get it out.

Dan

Did you get decent directions?

Don-MT · 02-15-2016, 05:28 PM

Quote:

Originally Posted by Jdew72

I didn't drill/screw mine in. Clay barred the area, alcohol swabbed it off and used 3M. Survived the winter plus 140mph on a track in cold weather

Do I understand that you purchased a drill mount spoiler then mounted it with tape? I'm think of doing the same thing and am wondering how it's working out.

Thanks.

OldGuyFla · 02-16-2016, 08:48 AM

Quote:

Originally Posted by Don-MT

Do I understand that you purchased a drill mount spoiler then mounted it with tape? I'm think of doing the same thing and am wondering how it's working out.

Thanks.

I asked Jdew the same question a while back but don't think he has checked in lately. It's not real hard to mount with screws & will give you peace of mind about flying off the back at highway speeds. There are good DIYs here on the subject.

Dan

Don-MT · 02-19-2016, 09:46 PM

I was just hoping not to have to put drill bit to steel. A friend who does body work said the tape mount works well, especially if a little calk-type adhesive is used in conjunction with the double-stick tape.

Thanks, Don

OldGuyFla · 02-20-2016, 12:59 PM

Quote:

Originally Posted by Don-MT

I was just hoping not to have to put drill bit to steel. A friend who does body work said the tape mount works well, especially if a little calk-type adhesive is used in conjunction with the double-stick tape.

Thanks, Don

Yes I hear what you are saying, it took me a good part of the afternoon to decide & take a drill bit to the trunk after getting everything layed out. But I really didn't want to worry about that thing launching off the trunk while moving.
One thing I was wondering due to you living in Montana was if that 2 sided tape would become brittle in that cold cold weather up there & not hold as tight?

Let me know if you decide on the tape & how it came out.

Dan

maclutter · 01-28-2017, 10:22 PM

Quote:

Originally Posted by Jdew72

I didn't drill/screw mine in. Clay barred the area, alcohol swabbed it off and used 3M. Survived the winter plus 140mph on a track in cold weather.

IMG]

Sent from my iPhone using Tapatalk

Do you remember where you ordered your spoiler? How much was it?
Thanks!!!

OldGuyFla · 01-31-2017, 05:31 PM

Hi

I haven't seen Jdew72 on here for awhile. there are a number of places that have the same one. I got mine here Nissan Spoilers

Hope this helps

Dan

Baronsmokes · 06-06-2018, 09:32 PM

Quote:

Originally Posted by maclutter

Do you remember where you ordered your spoiler? How much was it?
Thanks!!!

That is my favorite spoiler for roadsters.

Jdew72 · 05-20-2015, 12:36 PM

Sent from my iPhone using Tapatalk

LennyK · 12-02-2015, 08:12 AM

Quote:

Originally Posted by Jdew72

CAN'T WAIT TO DO THIS "WING TECH SPOILER" INSTALL ON MINE .

ORDERED MINE TODAY - DOING THE "NO DRILL" INSTALL

09-30-2016, 11:03 PM	#1 (permalink)
RoadsterFun Base Member Join Date: Feb 2016 Location: Tracy CA Posts: 35 Drives: 2010 370z Roadster Rep Power: 10	Spoiler Yes, I posted on this roadster forum. I have a couple of pics on my roadsterfun I got it from eBay painted for about $235. Good quality. Makes a huge difference on the look... Breaks it up nicely

01-31-2017, 05:31 PM	#12 (permalink)
OldGuyFla A True Z Fanatic Join Date: Jan 2016 Location: Indian Lake Estates Fl Posts: 1,049 Drives: 14 370Z TS Roadster Rep Power: 19128	Hi I haven't seen Jdew72 on here for awhile. there are a number of places that have the same one. I got mine here Nissan Spoilers Hope this helps Dan __________________

05-20-2015, 12:36 PM	#14 (permalink)
Jdew72 Base Member Join Date: Jan 2014 Location: Iowa Posts: 31 Drives: 2010 370Z Roadster Rep Power: 12	Sent from my iPhone using Tapatalk gr8-wrx and LennyK like this. __________________ 2010 Platinum Graphite 370ZR 6sp Touring Sport K&N drop ins, Z1 intake tubes, CNT CBE, stubby antenna

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
any roadsters with wheels yet?	koeppelnissan	Wheels & Tires	16	01-04-2013 06:56 AM
6 roadsters	glockman	New 370Z Owner	7	10-18-2012 07:36 PM
Where are all the new 370Z Roadsters?	JDUKUSA	Nissan 370Z Pricing / Ordering Discussions	2	01-16-2012 05:48 PM
Available coilovers for our Roadsters?	TonySlimfast	Nissan 370Z Roadster (Convertible)	15	09-26-2011 06:55 PM
Roadsters In MN...	ezred	Nissan 370Z Roadster (Convertible)	0	06-06-2011 08:52 PM

09-30-2016, 11:49 PM	#2 (permalink)
ReeceZ Base Member Join Date: Dec 2013 Location: South Africa Posts: 44 Drives: 370ZR Rep Power: 3367	Great. Thanks axmea? Have you had issues with fitting/mounting this spoiler?

02-07-2016, 09:52 AM	#4 (permalink)
Spoiler A True Z Fanatic Join Date: Jun 2015 Location: Central Florida Age: 65 Posts: 8,409 Drives: 21 Supra -Blk/Red Rep Power: 2684381	I just sent jdew a pm about this also.... My new spoiler is sitting here...

02-08-2016, 10:37 AM	#5 (permalink)
OldGuyFla A True Z Fanatic Join Date: Jan 2016 Location: Indian Lake Estates Fl Posts: 1,049 Drives: 14 370Z TS Roadster Rep Power: 19128	Hi, I got mine last week & it is on already, not real hard. It took me a day & a half & I was slowed down because I dropped a screw into the trunk cavity & had to get it out. Dan

02-19-2016, 09:46 PM	#9 (permalink)
Don-MT Base Member Join Date: Sep 2015 Location: Montana Posts: 47 Drives: 73 240Z, 10 370Z-R Rep Power: 68	I was just hoping not to have to put drill bit to steel. A friend who does body work said the tape mount works well, especially if a little calk-type adhesive is used in conjunction with the double-stick tape. Thanks, Don