Love the Paddle Shifters

FPenvy · 10-16-2014, 02:04 PM

Quote:

Originally Posted by Amuse370z

Do you 7AT owners let go of the throttle when you shift?

When do you shift up on normal daily driving? 3k?

I'm guessing MT and AT owners will be shifting at different points because of the extra gears in the 7at?

why would you let off?

one of the main benefits of a 7AT is being able to do no lift shifts lol

daily driving shifts depend on what i'm doing. just rolling through traffic leave it in 1, 2, or 3 pending gap in traffic. rolling out of red lights i'll just shift low around 3500 area since i blieve its almost 4k rpms to get it to go into 4th.

or if i need to be somewhere i'll shift around 7200-8000k

nghivinhton · 10-16-2014, 02:37 PM

i also "love the paddle shifter" ... that's all im saying lol

Haboob · 10-16-2014, 03:54 PM

Flappy paddles!

Firebase99 · 10-17-2014, 06:36 AM

The paddles on a Z dont rotate with the wheel? WTF? Even on my car they do. How do you shift in a turn????

Wonka2581 · 10-17-2014, 06:38 AM

Quote:

Originally Posted by Haboob

Flappy paddles!

( Click to show/hide )

watson853 · 10-17-2014, 07:03 AM

Quote:

Originally Posted by Firebase99

The paddles on a Z dont rotate with the wheel? WTF? Even on my car they do. How do you shift in a turn????

Paddles that rotate with the wheel are horrible. Shifting in a turn is very easy the paddles are very large.

Sent from my iPad using Tapatalk

Chuck33079 · 10-17-2014, 07:14 AM

I thought you weren't supposed to be shifting in a turn anyway? Downshift under braking, not in the turn.

Firebase99 · 10-17-2014, 07:32 AM

Quote:

Originally Posted by Chuck33079

I thought you weren't supposed to be shifting in a turn anyway? Downshift under braking, not in the turn.

I get aggressive on this one intersection when Im behind other cars waiting for the light to turn green and go though the sweeping right. I usually get on it pretty good and go to 2nd halfway through the turn grabbing the open free lane. Im pretty much hauling *** by the time I complete it.

Chuck33079 · 10-17-2014, 07:41 AM

Quote:

Originally Posted by Firebase99

I get aggressive on this one intersection when Im behind other cars waiting for the light to turn green and go though the sweeping right. I usually get on it pretty good and go to 2nd halfway through the turn grabbing the open free lane. Im pretty much hauling *** by the time I complete it.

How does anything you just said address the fact that shifting in a turn upsets the car and you should do it before or after the turn? I thought you had track experience?

zeeder · 10-17-2014, 07:43 AM

Quote:

Originally Posted by Chuck33079

How does anything you just said address the fact that shifting in a turn upsets the car and you should do it before or after the turn? I thought you had track experience?

Exactly, especially if it's something you know you're going to have to do. If it's a random thing I could understand but...

That said, I would hope he's not anywhere near the traction limit on the streets when performing this maneuver.

Firebase99 · 10-17-2014, 07:46 AM

Quote:

Originally Posted by Chuck33079

How does anything you just said address the fact that shifting in a turn upsets the car and you should do it before or after the turn? I thought you had track experience?

LOL, on a circuit, of course, torque steer, balance, apex etc, etc. This is from a stop, immediately going into a right turn, getting on the throttle to have the open lane. What choice does one have? Turning right at 31 mph while you bounce off the limiter?

Edit: Come to think of it, when I had the 370, I did NOT upshift through this turn, it was a manual and I generally held 2nd cuz it revs higher than my Genesis.

FPenvy · 10-17-2014, 07:50 AM

i like this thread because i get to battle the manual fanboys

and also i get to see the amount of people who just dont know how to drive the car well even with an automatic transmission.

makes me feel like a professional race driver when reading some of these statements.

mishuko · 10-17-2014, 07:57 AM

Rough shifting in manual is all user error. From my own experience I had the hardest time shifting under 3k for awhile. I had to rev to 4-5.5k in first to get a smooth shift. Now I can shift under 2k if I want to 'save' some gas for the spirited moments and it's smooth. Then again there are sweet spots too. Or I could be talking up my arse.

Quote:

Originally Posted by Limeybastard

Wanna hear a little joke on me? Well, earlier today a person in front was speeding up slowing down and drifting all over the place. I was driving at approx 45mph in a 50mph zone when I got overly excited and double pressed ( I assume ) the down shift paddle into second gear ( again I assume ) with a view to pass him. The car hit the rev limiter three times until I realized what I was doing ZOMG! Meaning it cut power three times as it bounced the tach needle. I duly then upshifted and finished my passing moneaver.

i've bounced the tach once on a slow redline (70%throttle or so)... never again. never again...

Quote:

Originally Posted by FPenvy

why would you let off?

one of the main benefits of a 7AT is being able to do no lift shifts lol

daily driving shifts depend on what i'm doing. just rolling through traffic leave it in 1, 2, or 3 pending gap in traffic. rolling out of red lights i'll just shift low around 3500 area since i blieve its almost 4k rpms to get it to go into 4th.

or if i need to be somewhere i'll shift around 7200-8000k

8krpm? did you tune to allow that extra 500 rpm of spin?

Quote:

Originally Posted by Chuck33079

I thought you weren't supposed to be shifting in a turn anyway? Downshift under braking, not in the turn.

I thought so too... something about putting a dynamic strain on the drive shaft and tranny... although I do shift while turning if I wind out first a bit much...

UNKNOWN_370 · 10-17-2014, 01:20 PM

Quote:

Originally Posted by Firebase99

The paddles on a Z dont rotate with the wheel? WTF? Even on my car they do. How do you shift in a turn????

Lol.. shift in a turn??? HAIL THE DK You must drift every time you take a corner,

Paddles cover in the middle of 1/2 oclock to and 4/5 oclock. There's a lot of room 4 play You just get used having one of your hands at 9 and three. I really don't see the big deal.

Lastly I don't recommend shifting in the axis of a turn unless your goal is to either slide or cut power, depending which way you shift

FPenvy · 10-17-2014, 01:25 PM

Quote:

Originally Posted by mishuko

8krpm? did you tune to allow that extra 500 rpm of spin?

yes. when i got the car tuned i had the redline raised.

but the power does drop off a bit after 7400rpm per the dyno sheets.

10-17-2014, 07:14 AM	#142 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	I thought you weren't supposed to be shifting in a turn anyway? Downshift under braking, not in the turn. UNKNOWN_370, Montez, FPenvy and 3 others like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
'15 Base 7AT = No Paddle Shifters???	IAmTheStig	Nissan 370Z General Discussions	138	11-03-2014 09:29 AM
I would like to know more about the 370z's Paddle shifters.	Dontius9	Nissan 370Z General Discussions	71	07-18-2013 03:48 PM
shift or paddle shifters	sheps58	Nissan 370Z General Discussions	26	10-02-2010 03:02 PM
370Z Paddle Shifters vs G37S Sport Coupe Paddle Shifters	hey32g	Nissan 370Z General Discussions	12	02-06-2010 05:25 PM
Paddle Shifters	ddvette9	Nissan 370Z General Discussions	27	06-26-2009 02:45 PM

10-16-2014, 02:37 PM	#137 (permalink)
nghivinhton Base Member Join Date: Sep 2014 Location: Garland Posts: 47 Drives: 2011 Z Sport Prl Wht Rep Power: 10	i also "love the paddle shifter" ... that's all im saying lol

10-16-2014, 03:54 PM	#138 (permalink)
Haboob A True Z Fanatic Join Date: Aug 2012 Location: Surface of the sun. Posts: 13,159 Drives: '18 GTI Autobahn DSG Rep Power: 1386	Flappy paddles!

10-17-2014, 06:36 AM	#139 (permalink)
Firebase99 A True Z Fanatic Join Date: Sep 2013 Location: fl Posts: 1,372 Drives: 14 3.8 Gen Coupe GT Rep Power: 14033	The paddles on a Z dont rotate with the wheel? WTF? Even on my car they do. How do you shift in a turn????