What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

Jayhovah · 09-17-2016, 01:30 PM

Quote:

Originally Posted by ChopsZ

The sad thing is, I had mine at a shop... A performance shop at that... With a damn 1.8L Civic sitting in the corner pushing 600+ hp!

Anyway, he tried everything possible, and that bolt didn't budge. So in a few weeks I'll be taking it back so he can actually remove the exhaust manifolds and cut those stupid bolts off. A lot of freakin' work just to remove a couple of cats.

Did he use extractors? You should be able to get plenty enough torque to break the stud using an extractor.

Sent from my Nexus 6 using Tapatalk

Jayhovah · 09-17-2016, 01:54 PM

I was just sorting my TT install pics so I have these on hand....

Here is the impact socket deformed after failing to break the drivers side demon bolt loose...

And here is the thing looking back at me in triumph...

F#cker...

Broken stud...

Size matters...

Rounded nut out of the extractor.

Another shot of the broken stud...

ChopsZ · 09-17-2016, 02:01 PM

Well good... Since you're in St Pete and I'm right here in Lakeland, I'll come over to your place and you can snap them b**ches off for me. LOL

Jayhovah · 09-17-2016, 02:07 PM

Quote:

Originally Posted by ChopsZ

Well good... Since you're in St Pete and I'm right here in Lakeland, I'll come over to your place and you can snap them b**ches off for me. LOL

My GF is out of town so all I'm doing today is watching football... =)

Stop by Harbor Freight and pick up two long 1/2" extensions and a set of bolt extractors along the way (I was at my brother-in-laws place when I had to do it). I do have the breaker bar though =)

Z_ealot · 09-17-2016, 03:18 PM

Quote:

Originally Posted by Jayhovah

I was just sorting my TT install pics so I have these on hand....

Here is the impact socket deformed after failing to break the drivers side demon bolt loose...

And here is the thing looking back at me in triumph...

F#cker...

Broken stud...

Size matters...

Rounded nut out of the extractor.

Another shot of the broken stud...

Know how you feel, strangely enough though i was able to get both driver side and passenger side bolts out without breaking anything. That was with about as many extensions and an 18 inch breaker bar and just pressing on it with my entire body weight lol

Sent from my iPhone using Tapatalk

kenchan · 09-18-2016, 06:09 PM

sounds like some folks were between a rock and a hard place... lol GJ getting that thing off.

for me, just enjoyed motoring my Z today at 65-70F-ish sunny weather. had a great time. 2 more drives before hibernation. qd'ed afterwards. also checked out my buddy's new Q50 RS400. very nice. funny he's about my age and has these adult cars while im still fiddling around with kids toys.

not dat i would change a thing.

b15 · 09-18-2016, 06:21 PM

Took the Z out this morning for a back road run. It loved the 58* air. Was a great drive. Made me question if I'm sure about selling it.

shadow85 · 09-18-2016, 09:21 PM

Hey guys with the 13+ models. What did you guys do with the stock geniune ray's engineering wheels after you guys got new afternarket wheels for your Z?

Did you guys sell them, keep them for spares or value?

Im thinking of getting some aftermarket wheels but would need to sell the stock rays wheels to fund the aftermarket set.

Do they fetch much?

axmea? · 09-19-2016, 12:25 AM

Quote:

Originally Posted by shadow85

Hey guys with the 13+ models. What did you guys do with the stock geniune ray's engineering wheels after you guys got new afternarket wheels for your Z?

Did you guys sell them, keep them for spares or value?

Im thinking of getting some aftermarket wheels but would need to sell the stock rays wheels to fund the aftermarket set.

Do they fetch much?

The OEM RAYS Sport wheels are so undervalued given the build and quality. They are super light and perform great. There are just too many out there that the price is driven down. Had some previous offers for 1k but it fell through. Now they are being offered at sub 1k with tires and that is just absurd. I'm keeping it for good.

shadow85 · 09-19-2016, 12:31 AM

You guys are in the states also, so probably have alot more of them floating around. I wonder what they are worth here in Aus.

ChopsZ · 09-19-2016, 08:20 PM

Two days ago, I ordered the Z1 CAI. Today I ordered the EcuTek from Specialty Z with the data-logging option.

Now I need to find some GT-R injectors so I can run E85.

ChaseZ · 09-20-2016, 01:02 AM

Quote:

Originally Posted by ChopsZ

Today I ordered the EcuTek from Specialty Z with the data-logging option.

Waiting (impatiently) for mine to show up from Sebastian. Really looking forward to it, not least of all because I already sold my uprev license and cable so I'm running stock ecu and it's driving me nuts!

ChopsZ · 09-20-2016, 07:23 AM

Quote:

Originally Posted by ChaseZ

Waiting (impatiently) for mine to show up from Sebastian. Really looking forward to it, not least of all because I already sold my uprev license and cable so I'm running stock ecu and it's driving me nuts!

Imagine doing that on a turbo car! My last car, a Fiat 500 Abarth, I switched tuners and dropped from 230 hp & 250 ft lbs down to a stock 160 hp and 170 ft lbs. Imagine how I felt for those two weeks. LOL

Ghostvette · 09-20-2016, 07:54 AM

Quote:

Originally Posted by ChaseZ

Waiting (impatiently) for mine to show up from Sebastian. Really looking forward to it, not least of all because I already sold my uprev license and cable so I'm running stock ecu and it's driving me nuts!

Quote:

Originally Posted by ChopsZ

Imagine doing that on a turbo car! My last car, a Fiat 500 Abarth, I switched tuners and dropped from 230 hp & 250 ft lbs down to a stock 160 hp and 170 ft lbs. Imagine how I felt for those two weeks. LOL

From VROOOOOOOOOOMMVMMMMMM to puttputtputtputt

2016 370z · 09-20-2016, 12:29 PM

Whatever magic you guys worked with those bolt extractors did not work for me. I ended up stripping the bolt extractors

09-17-2016, 02:01 PM	#3 (permalink)
ChopsZ Track Member Join Date: May 2016 Location: Central Florida Age: 51 Posts: 965 Drives: 2016 370Z GM 6MT Rep Power: 2303	Well good... Since you're in St Pete and I'm right here in Lakeland, I'll come over to your place and you can snap them bches off for me. LOL __________________ She's For Sale! PERFORMANCE: Aero Workz \| Akebono \| BC Racing \| EcuTek \| HKS \| MaxBore \| Motordyne \| Nismo \| RJM \| SPL \| StopTech \| Z1 AUDIO: Arc Audio \| Bazooka \| Helix \| Pioneer \| Stereo Integrity**

09-19-2016, 08:20 PM	#11 (permalink)
ChopsZ Track Member Join Date: May 2016 Location: Central Florida Age: 51 Posts: 965 Drives: 2016 370Z GM 6MT Rep Power: 2303	Two days ago, I ordered the Z1 CAI. Today I ordered the EcuTek from Specialty Z with the data-logging option. Now I need to find some GT-R injectors so I can run E85. __________________ She's For Sale! PERFORMANCE: Aero Workz \| Akebono \| BC Racing \| EcuTek \| HKS \| MaxBore \| Motordyne \| Nismo \| RJM \| SPL \| StopTech \| Z1 AUDIO: Arc Audio \| Bazooka \| Helix \| Pioneer \| Stereo Integrity

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 04:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 06:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM

09-18-2016, 06:09 PM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	sounds like some folks were between a rock and a hard place... lol GJ getting that thing off. for me, just enjoyed motoring my Z today at 65-70F-ish sunny weather. had a great time. 2 more drives before hibernation. qd'ed afterwards. also checked out my buddy's new Q50 RS400. very nice. funny he's about my age and has these adult cars while im still fiddling around with kids toys. not dat i would change a thing.

09-18-2016, 06:21 PM	#7 (permalink)
b15 A True Z Fanatic Join Date: Feb 2010 Location: Chicago Posts: 3,229 Drives: 4drz Rep Power: 36573	Took the Z out this morning for a back road run. It loved the 58* air. Was a great drive. Made me question if I'm sure about selling it.

09-18-2016, 09:21 PM	#8 (permalink)
shadow85 Track Member Join Date: Jul 2015 Location: South Australia, Austra Posts: 921 Drives: 15' 370Z A/T AMM TT Rep Power: 26	Hey guys with the 13+ models. What did you guys do with the stock geniune ray's engineering wheels after you guys got new afternarket wheels for your Z? Did you guys sell them, keep them for spares or value? Im thinking of getting some aftermarket wheels but would need to sell the stock rays wheels to fund the aftermarket set. Do they fetch much?

09-19-2016, 12:31 AM	#10 (permalink)
shadow85 Track Member Join Date: Jul 2015 Location: South Australia, Austra Posts: 921 Drives: 15' 370Z A/T AMM TT Rep Power: 26	You guys are in the states also, so probably have alot more of them floating around. I wonder what they are worth here in Aus.

09-20-2016, 12:29 PM	#15 (permalink)
2016 370z Base Member Join Date: Jun 2016 Location: San Francisco, CA Posts: 101 Drives: 16 370z GM 6MT Rep Power: 11	Whatever magic you guys worked with those bolt extractors did not work for me. I ended up stripping the bolt extractors