What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

Masterbeatty · 10-08-2015, 06:32 PM

Came out of the local stop and shop and met another member and his GF. Turns out he lives right down the street from me and We are two of 4 370z's in my small town. The

Sent from my iPhone using Tapatalk

forza370z · 10-08-2015, 09:59 PM

Quote:

Originally Posted by Silly Rabbit

Mr UPS guy dropped off a pair of Aerojacket carbon fiber vented fenders.

Then this happened.

Dynojet dyno (STD smoothing: 5). Pulls were done in 4th gear.

Max Power 291.56 at 7.32 RPM Max Torque 249.14 at 4.31 RPM
Max Power 294.18 at 7.41 RPM Max Torque 250.91 at 4.42 RPM
Max Power 295.97 at 7.42 RPM Max Torque 250.82 at 4.36 RPM

Will post the chart later. All I have it a print out for now.

Mr UPS guy dropped off a pair of Aerojacket carbon fiber vented fenders.

Nice man! I am glad you finally got the fenders.

PeteZ · 10-08-2015, 10:30 PM

Finally got around to installing my Stillen G3 CAI yesterday. Been sitting in my garage for 6 months. Due to the "hassle" of pulling the front fascia to clean the air filters, I ordered K & N PreCharger wraps for the air filters as well. ( K & N part number 22-8044PK ). Less than $20 each too. They keep the big stuff out of them for sure and makes cleaning/recharging easier too. I have these on my Xterra as well and they work great. No restriction to airflow either. Basically they install like a ... condom. See attached pix for part numbers, etc.

jchammond · 10-09-2015, 03:38 AM

2nd flat in 2mos...looks like about time for 4th pair of rear tires.....& some camber arms.ImageUploadedByTapatalk1444379916.997115.jpg
I got a spare to mount up/ not hardly any better tread. Lol

Sent from my iPhone using Tapatalk

JARblue · 10-09-2015, 07:14 AM

Never seen this before. Thought some people would like it

Quote:

Originally Posted by caalmaden

Hi,

I ordered it from Japan. The product code for the key holder is KWA10-60B00-RD. I loved this car so much that I even ordered the catalog for the Fairlady Z and the catalogue for Optional Parts for the NISMO Z from Japan. There are some cool stuff on the optional parts.

JARblue · 10-09-2015, 07:15 AM

Hit 70K the other night. Fuked up the mileage photo

I'll update my album later with the 70001 mile pic

RumbleFish · 10-09-2015, 12:43 PM

Had Stillen sway bars & kw v3's installed.

Huge improvement! Like it's on rails through the twisties.

Thanks to Seb, LJ & Jonathan @ Specilaty Z!

D.Stillwell · 10-10-2015, 09:05 AM

Installed Stillen exhaust last night, after the rain on wet ground, in the parking spot, on jack stands....hardcore style

Pullin out the Z all day today

Sent from my SM-G860P using Tapatalk

kenchan · 10-10-2015, 11:40 AM

motored my z this am for the last time this season, had a good drive. filled with stabil and did a full QD and now curing the QD's wax completely before car cover tomorrow.

will place her on flatstoppers later this pm.

DeliriousClam · 10-10-2015, 05:49 PM

Put these on.

csnow · 10-10-2015, 06:21 PM

Quote:

Originally Posted by DeliriousClam

Put these on.

my heart bleeds for your paint if you used that foaming brush at the self wash.

say it ain't so

Pops · 10-10-2015, 06:25 PM

Installed a TWM Performance M1 Abrams Shift Knob (Satin Finish) with Z1 Motorsports Aluminum Shift Knob Finisher (Black Finish).

DeliriousClam · 10-10-2015, 06:32 PM

Quote:

Originally Posted by csnow

my heart bleeds for your paint if you used that foaming brush at the self wash.

say it ain't so

Hell no.

csnow · 10-10-2015, 06:35 PM

Quote:

Originally Posted by DeliriousClam

Hell no.

breathed a sigh of relief now time meow. nice job on the halos

DeliriousClam · 10-10-2015, 06:39 PM

Quote:

Originally Posted by csnow

breathed a sigh of relief now time meow. nice job on the halos

I worked detailing cars when I was a teenager so I know that's a nono.
However all credit for the halos goes to rajmangal

10-08-2015, 06:32 PM	#5596 (permalink)
Masterbeatty A True Z Fanatic Join Date: May 2012 Location: Whales Vagina Posts: 4,586 Drives: the speed limit... Rep Power: 122866	Came out of the local stop and shop and met another member and his GF. Turns out he lives right down the street from me and We are two of 4 370z's in my small town. The Sent from my iPhone using Tapatalk onzedge, jpkirk and Silly Rabbit like this. __________________ 2011 MB 6MT Masterbeatty journal

10-09-2015, 03:38 AM	#5599 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 57 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	2nd flat in 2mos...looks like about time for 4th pair of rear tires.....& some camber arms.ImageUploadedByTapatalk1444379916.997115.jpg I got a spare to mount up/ not hardly any better tread. Lol Sent from my iPhone using Tapatalk __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

10-09-2015, 07:15 AM	#5601 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Hit 70K the other night. Fuked up the mileage photo I'll update my album later with the 70001 mile pic jpkirk and madwi like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

10-09-2015, 12:43 PM	#5602 (permalink)
RumbleFish Premium Member Join Date: Oct 2013 Location: Los Feliz, Ca. Posts: 1,212 Drives: '10-Sport-M6 Rep Power: 8239	Had Stillen sway bars & kw v3's installed. Huge improvement! Like it's on rails through the twisties. Thanks to Seb, LJ & Jonathan @ Specilaty Z! __________________ How far, this...Utopia? F.I. CBE V2/Stillen G3 CAI/GTM 25R OC/EcuTek tune (Specialty Z)/ KW V3's/Stillen Sway bars/SPC rear camber kit/Z1 FUCA/Mich. PSS4S 255/35-295/30

10-10-2015, 11:40 AM	#5604 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	motored my z this am for the last time this season, had a good drive. filled with stabil and did a full QD and now curing the QD's wax completely before car cover tomorrow. will place her on flatstoppers later this pm. P's_Z likes this.

10-10-2015, 09:05 AM	#5603 (permalink)
D.Stillwell Enthusiast Member Join Date: Sep 2015 Location: Snakeden Branch, VA Posts: 396 Drives: Fairlady Z34/6MT Rep Power: 18	Installed Stillen exhaust last night, after the rain on wet ground, in the parking spot, on jack stands....hardcore style Pullin out the Z all day today Sent from my SM-G860P using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 04:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 06:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM