Alright, I need some help on the A Pillar

f1mclarenagr · 02-24-2014, 08:47 PM

Hey guys, alright I cannot figure this one out and frankly not too sure what I should do. I am trying to remove the A-Pillar interior piece and this is the first time I have seen this. It is a plastic piece that I think holds the pillar in place when the airbag deploys.

The pic below show the driver side A-Pillar looking top down towards the steering wheel.

How the eff do I remove that circled plastic piece? I don't want to cut it as I'd rather not take a pillar to the face. Also it seems as I push the pillar back in place it "winds" back into the plastic housing on the pillar itself. Tried searching but didn't find much. Same with google

kenchan · 02-24-2014, 09:43 PM

i believe mr.gale told me to turn it with a needle nose plier 90 degrees to release.

you can thank mr. gale for his input.

f1mclarenagr · 02-24-2014, 10:00 PM

Quote:

Originally Posted by kenchan

i believe mr.gale told me to turn it with a needle nose plier 90 degrees to release.

you can thank mr. gale for his input.

Classicccccc. Didn't think to twist lol. Thanks, I will give it a try

GaleForce · 02-25-2014, 04:14 AM

Yep twisting it is the easiest way.

GJ Mr.Kenchan

kenchan · 02-25-2014, 11:20 AM

Quote:

Originally Posted by GaleForce

Yep twisting it is the easiest way.

GJ Mr.Kenchan

mr.gale-

02-24-2014, 08:47 PM	#1 (permalink)
f1mclarenagr Base Member Join Date: May 2012 Location: Milwaukee Wi Posts: 39 Drives: '12 370Z Sport Blk 6 Rep Power: 12	Alright, I need some help on the A Pillar Hey guys, alright I cannot figure this one out and frankly not too sure what I should do. I am trying to remove the A-Pillar interior piece and this is the first time I have seen this. It is a plastic piece that I think holds the pillar in place when the airbag deploys. The pic below show the driver side A-Pillar looking top down towards the steering wheel. How the eff do I remove that circled plastic piece? I don't want to cut it as I'd rather not take a pillar to the face. Also it seems as I push the pillar back in place it "winds" back into the plastic housing on the pillar itself. Tried searching but didn't find much. Same with google

02-24-2014, 09:43 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	i believe mr.gale told me to turn it with a needle nose plier 90 degrees to release. you can thank mr. gale for his input. onzedge, GaleForce and f1mclarenagr like this.

02-25-2014, 04:14 AM	#4 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51864	Yep twisting it is the easiest way. GJ Mr.Kenchan kenchan and f1mclarenagr like this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Alright so who's is it!!!!!???	ubs234	Nissan 370Z General Discussions	14	10-22-2013 12:08 PM
my b-pillar came off :(	dudesky	Exterior & Interior	9	05-03-2011 08:02 PM
WTB: OEM B-Pillar	Boost_lee	Wanted	1	01-03-2011 01:17 AM
Just got a Z! Did I do alright?	mspaun3	Nissan 370Z Pricing / Ordering Discussions	13	12-23-2010 01:05 PM
Alright, who did it?	iff2mastamatt	Nissan 370Z General Discussions	4	04-11-2010 03:43 PM