NEW Dyno results are in....

kdo2milger · 08-07-2009, 09:29 PM

Impressive!!!

you thought about a wetshot for another 100 whp?

2theextreme · 08-07-2009, 11:19 PM

Quote:

Originally Posted by kdo2milger

Impressive!!!

you thought about a wetshot for another 100 whp?

No, never heard of that, actually. Do tell.....

2theextreme · 08-07-2009, 09:30 PM

Quote:

Originally Posted by DannyGT

At this time, I would not roll it. One big reason being, is that unfortunatly you cannot roll that clip, and it sucks because thats where the rubbing occurs. TRUST ME - I have tried and its not happening.

So, corner balancing is usually done when your getting aligned and in simple terms it basically raises/lowers all the corners accordingly to reach a 50/50 cross balance on the vehicle. Also, I would recommend to get it done with a half tank of gas so your as balanced as possible. A good shop will even balance and align your car based on the drivers weight too!

You just tell them you like the height where it is and when they balance it the changes are literally minimal and you wont really notice. Also, you might be able to get away without having to cut anything with a camber of -2.2 or more in the front.

I'll try and take pictures tomorrow of the amount I cut (before my balance/alignment) which eliminated the issue. I just want you to get the balance alignment done first because it may stop the rubbing all together. Its still going to be VERY close.

Hope this helps...

Thanks for the tip! Yes, I'd love to see pictures. Did you take your car to a specific shop or just some place like Just Tires or NTB?

zZSportZz · 08-07-2009, 07:41 PM

I can bring my dremel up tomorrow and we could do some parking lot trimming...

HAHA, im kidding

Oh and btw...im gonna *fap fap* all over the side of your car...so make sure to take pics from only one side.

2theextreme · 08-07-2009, 08:09 PM

Quote:

Originally Posted by zZSportZz

I can bring my dremel up tomorrow and we could do some parking lot trimming...

HAHA, im kidding

Oh and btw...im gonna *fap fap* all over the side of your car...so make sure to take pics from only one side.

that'd make for an epic YouTube video......and I mean the trimming.....not the *fapping*!

nogoodname · 08-07-2009, 07:46 PM

nah man, no fender rolling, the fenders are rolled already enough and one mistake and the paint can crack.

2theextreme · 08-07-2009, 08:10 PM

Quote:

Originally Posted by nogoodname

nah man, no fender rolling, the fenders are rolled already enough and one mistake and the paint can crack.

Yeah, Clint & Jae @ Altered mentioned the possibility of messing up the paint.....don't wanna solve one issue by causing another.

nogoodname · 08-07-2009, 08:13 PM

whatever he says, i say and vice versa...lol

2theextreme · 08-07-2009, 08:16 PM

Quote:

Originally Posted by nogoodname

whatever he says, i say and vice versa...lol

Yes, I've begun to notice that!

nogoodname · 08-07-2009, 08:21 PM

stink eye'in me now

frost · 08-07-2009, 08:33 PM

I used to have a gto, along with my boss. We both rolled our fenders, mine came out fine, his paint flaked up. Just gotta have the touch I guess

Kidding, don't risk your paint.

DannyGT · 08-07-2009, 11:11 PM

Euro Tire in NJ, they are kinda famous for how good they are. They setup a ton of track Porsche's. I mean alot of places that do alignment can do balancing, but I guess some just do it alot better than others.

2theextreme · 08-07-2009, 11:19 PM

Quote:

Originally Posted by DannyGT

Euro Tire in NJ, they are kinda famous for how good they are. They setup a ton of track Porsche's. I mean alot of places that do alignment can do balancing, but I guess some just do it alot better than others.

Yeah, that's what I'm thinking. Time for me to do a little researching around the local area and see who has a good rep for balancing and alignment.

Endgame · 08-08-2009, 08:35 AM

I agree Tony... TIme to tune her up next!!

frost · 08-22-2009, 02:11 PM

"I was told the results would have probably been about +5 whp if it had been done in 5th gear. "

Then why didn't they do it in 5th?

08-07-2009, 09:29 PM	#1 (permalink)
kdo2milger OG Priesthood Join Date: Feb 2009 Location: Fargo, ND Posts: 17,859 Drives: NISMO T Rep Power: 61	Impressive!!! you thought about a wetshot for another 100 whp? __________________ Project *NISMO*

08-07-2009, 11:11 PM	#12 (permalink)
DannyGT Track Member Join Date: Jan 2009 Location: Jersey Posts: 919 Drives: 370Z (SOLD) Rep Power: 281	Euro Tire in NJ, they are kinda famous for how good they are. They setup a ton of track Porsche's. I mean alot of places that do alignment can do balancing, but I guess some just do it alot better than others. __________________ Performance GTM Stage 1 SC, GTM Res.Test Pipes, Invidia Gemini Exhaust, GTM HD Oil Cooler Wheels & Suspension AME Tracer TM02's 19x9.5F 19x10.5R w/ 265x35F & 305x30R, Hotchkis Sways, BC (BR) Racing Coilovers (Car Sold)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Induction parts + ECU reflash dyno results	Phimosis	Tuning	88	03-06-2010 03:26 AM
Gen 2 Results	tommyguns	Intake/Exhaust	3	05-25-2009 07:58 PM
My drag strip results (bad)	Skorch	Track / Autocross / Drifting / Dragstrip	13	05-13-2009 03:21 PM
Any drag strip results?	Skorch	Track / Autocross / Drifting / Dragstrip	38	04-15-2009 08:39 PM

08-07-2009, 07:41 PM	#4 (permalink)
zZSportZz A True Z Fanatic Join Date: Mar 2009 Location: Maryland Posts: 1,095 Drives: 370z Blk on Blk 6MT Rep Power: 20	I can bring my dremel up tomorrow and we could do some parking lot trimming... HAHA, im kidding Oh and btw...im gonna fap fap all over the side of your car...so make sure to take pics from only one side.

08-07-2009, 07:46 PM	#6 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1766	nah man, no fender rolling, the fenders are rolled already enough and one mistake and the paint can crack.

08-07-2009, 08:13 PM	#8 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1766	whatever he says, i say and vice versa...lol

08-07-2009, 08:21 PM	#10 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1766	stink eye'in me now

08-07-2009, 08:33 PM	#11 (permalink)
frost Retired admin Join Date: Dec 2008 Location: Winterfell Posts: 106,613 Drives: Your Wife Crazy Rep Power: 0	I used to have a gto, along with my boss. We both rolled our fenders, mine came out fine, his paint flaked up. Just gotta have the touch I guess Kidding, don't risk your paint.

08-08-2009, 08:35 AM	#14 (permalink)
Endgame A True Z Fanatic Join Date: Nov 2008 Location: Phoenix Posts: 1,613 Drives: Nothing Now! Rep Power: 225	I agree Tony... TIme to tune her up next!!

08-22-2009, 02:11 PM	#15 (permalink)
frost Retired admin Join Date: Dec 2008 Location: Winterfell Posts: 106,613 Drives: Your Wife Crazy Rep Power: 0	"I was told the results would have probably been about +5 whp if it had been done in 5th gear. " Then why didn't they do it in 5th?

*NEW* Dyno results are in....

NEW Dyno results are in....