Post your unique/rare parts here

gsxr750 · 03-16-2013, 08:13 PM

Quote:

Originally Posted by edub370

Please tell us more about how companies that use foam filters don't know what they're doing...

Its the size and surface area of the air filter that is to small to allow the engine to breathe properly, those green foam filters look like they be long on a 350cc dirt bike and they appear to be only about 5" dia x 2" in size.

In comparison to the external K/N units they appear to be a 1/3 rd of the size or less.

VDC_OFF · 03-19-2013, 10:09 AM

Quote:

Originally Posted by gsxr750

Its the size and surface area of the air filter that is to small to allow the engine to breathe properly, those green foam filters look like they be long on a 350cc dirt bike and they appear to be only about 5" dia x 2" in size.

In comparison to the external K/N units they appear to be a 1/3 rd of the size or less.

I'm sorry they are bigger than that. Top Secret uses HKS air filters for their intakes. I havent measured but they are either 200mm (7.87in) or they are the twin 150mm (5.9 in). Most likely with the 80mm inlet.

HKS USA Super Mega Flow Reloaded Kits (more)

Its just my tiltshift photography that makes it look miniature. :P

KaienZ34 · 03-05-2013, 10:24 AM

Looking good, i still haven't installed my TP front lip.

VDC_OFF · 03-05-2013, 10:31 AM

Quote:

Originally Posted by KaienZ34

Looking good, i still haven't installed my TP front lip.

Why not? Just slide it over the fangs first and then pop it up behind the bumper. I dont even use 3m anymore, just the 4 bolts.

KaienZ34 · 03-05-2013, 10:39 AM

Quote:

Originally Posted by VDC_OFF

Why not? Just slide it over the fangs first and then pop it up behind the bumper. I dont even use 3m anymore, just the 4 bolts.

Chicken i guess, the one time i tried i scratched the crap out of my bumper.

Alstann · 03-19-2013, 10:38 AM

Quote:

Originally Posted by KaienZ34

Chicken i guess, the one time i tried i scratched the crap out of my bumper.

Hey Kaien,

If you are still having issues, you can do what VDC said and plastidip the white on your car first, and also, use some thick duck tape on the backside of the fang cover. I did this on my EVOR fang cover, since I screwed up my bumper with scratches. Just leave a few areas exposed for 3m tape, just enough to hold it forward - the screws on the bottom do most of the work.

rAiN · 03-14-2013, 03:17 PM

Quote:

Originally Posted by KaienZ34

Looking good, i still haven't installed my TP front lip.

you should just sell that to me then

FireDan50 · 03-05-2013, 10:39 AM

I haven't seen too many Akrapovic exhausts around....

See a lot of Takatas....but not the Drift II/III series:

LMBmikeZ · 03-05-2013, 11:07 AM

VDC-OFF - the top secret lip looks great we got a member in Toronto area with one its cf to!

VDC_OFF · 03-05-2013, 11:21 AM

Quote:

Originally Posted by KaienZ34

Chicken i guess, the one time i tried i scratched the crap out of my bumper.

Yeah it will do that. What I did was take off my bumper and paint the fangs flat black, this also hid a small white line that was showing behind. Use thin strips of 3m if you dont want that to happen.

Quote:

Originally Posted by LMBmikeZ

VDC-OFF - the too secret lip looks great we got a member in Toronto area with one its cf to!

Thanks. The sideskirts are the rare pieces

rAiN · 03-14-2013, 03:17 PM

this thread is so much full of win

i think i am the only few with this coilover in this the370z forum...

forza370z · 03-14-2013, 11:36 PM

Quote:

Originally Posted by rAiN

this thread is so much full of win

i think i am the only few with this coilover in this the370z forum...

( Click to show/hide )

Blitz Damper ZZ-R Coilovers? Nice!

jpritche · 03-14-2013, 03:25 PM

I have(if I am not mistaken) the only set of Coilovers made by Z1 Motorsports. I didn't take any pictures of the install before though

They are amazing coilovers and allow you to retain stock height if you wanted to or slam it down. Very versatile and preformed very well on the track. Too bad they never made it into production.

4r3s · 03-14-2013, 03:29 PM

Quote:

Originally Posted by simota1

ill bite

first off

( Click to show/hide )

Simota, are those the door handles I sold you on your car?

I have a set of Advan RS-D wheels from Japan, I think that counts

Luckily they shipped just before the Tsunami hit.

simota1 · 03-14-2013, 03:39 PM

Quote:

Originally Posted by 4r3s

Simota, are those the door handles I sold you on your car?

I have a set of Advan RS-D wheels from Japan, I think that counts

Luckily they shipped just before the Tsunami hit.

indeed they are bud!!! i cant thank you enough still

03-05-2013, 10:24 AM	#3 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	Looking good, i still haven't installed my TP front lip. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

03-05-2013, 10:39 AM	#8 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 20	I haven't seen too many Akrapovic exhausts around.... See a lot of Takatas....but not the Drift II/III series: cdoxp800, RoshDawg, GaleForce and 3 others like this.

03-05-2013, 11:07 AM	#9 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10351	VDC-OFF - the top secret lip looks great we got a member in Toronto area with one its cf to! VDC_OFF likes this. __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON Last edited by LMBmikeZ; 03-19-2013 at 01:44 PM.

03-14-2013, 03:17 PM	#11 (permalink)
rAiN Track Member Join Date: Jan 2009 Location: va Posts: 721 Drives: 2012 370z mt Rep Power: 18	this thread is so much full of win i think i am the only few with this coilover in this the370z forum... simota1 and LMBmikeZ like this. Last edited by rAiN; 03-14-2013 at 03:30 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What are your unique 370Z experiences?	MarcusMIA	Nissan 370Z General Discussions	76	01-16-2015 04:54 PM
CarbonFiberElement.com: INTERIOR Component POST UR CFE PARTS :)	Carbon_z	Exterior & Interior	18	02-16-2013 01:02 PM
CarbonFiberElement.com: ENGINE Component POST UR CFE PARTS :)	Carbon_z	Exterior & Interior	4	01-16-2013 05:29 PM
Wanting to do something unique..	RoshDawg	Exterior & Interior	7	10-05-2012 10:12 AM

03-14-2013, 03:25 PM	#13 (permalink)
jpritche A True Z Fanatic Join Date: Oct 2010 Location: Cartersville, Ga Age: 33 Posts: 2,570 Drives: '15 RR, '14 IS250 Rep Power: 31	I have(if I am not mistaken) the only set of Coilovers made by Z1 Motorsports. I didn't take any pictures of the install before though They are amazing coilovers and allow you to retain stock height if you wanted to or slam it down. Very versatile and preformed very well on the track. Too bad they never made it into production.