What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

alcheng · 12-07-2013, 08:31 AM

Quote:

Originally Posted by Gadgetech

Updated wiring harness with annotations (hope it's correct!). Radio install starts tomorrow! Kenwood DDX790, ASWC, SiriusXM.

and good luck with the installation.

btw, make sure leave the "remote control" option on the HU at "on" otherwise the AWSC wont work.

programming the AWSC could be a headache, program the buttons manually, and be patience.

also, I am wondering why don't you get the handbrake bypass? it is very useful.

Gadgetech · 12-07-2013, 04:52 PM

Quote:

Originally Posted by alcheng

and good luck with the installation.

btw, make sure leave the "remote control" option on the HU at "on" otherwise the AWSC wont work.

programming the AWSC could be a headache, program the buttons manually, and be patience.

also, I am wondering why don't you get the handbrake bypass? it is very useful.

I got everything wired up and installed today! The biggest surprise was after talking to Axxess and them telling me to switch the wires (pins 5,11 on the ASWC harness to pins 6,16 on the car harness as stated in the manual to pins 5,11 to 16,6. We had already tapped the wires from the ASWC to the vehicle harness so we decided to cut both wires from the ASWC to the car harness and butt solder the blue/gray to the red/gray wires and vice versa) I was able to auto program the buttons. They all work and I just used the auto program method! I have a non-Bose Z so maybe that's the diff.

In regards to the e brake bypass, everything I read about that with the Kenwood HU is that you just ground the green wire to the chassis which I did...I'll go for a drive tonight to see if there's any issue and update back here.

Here's a picture of my buddy, we just peeled off wiring insulation on the vehicle's harness to tap the ASWC wires in.

nmjaxx9 · 12-07-2013, 05:20 PM

Whos in this biotch, drove the Z to work and detail later. Also ordered another key fob.

Wonderbread · 12-07-2013, 09:55 AM

Had the Stillen G3 CAI delivered and installed same day. I have no patience.

Special thanks to AK370Z for his DIY.

onzedge · 12-07-2013, 10:01 AM

Quote:

Originally Posted by Wonderbread

Had the Stillen G3 CAI delivered and installed same day. I have no patience.

Special thanks to AK370Z for his DIY.

Waiz · 12-07-2013, 11:41 AM

Quote:

Originally Posted by Wonderbread

Had the Stillen G3 CAI delivered and installed same day. I have no patience.

Special thanks to AK370Z for his DIY.

I have no patience either

Congrats!

Riptide67 · 12-07-2013, 01:25 PM

Installed a Kenwood DNX7160 last night. Easy install using the factory brackets from the Bose headunit and Metra wiring harness for the Bose, but I left out the PAC-SWI and reverse camera for now. I'll be installing a full CF Amuse replica in a couple months and will have to pull it all apart again anyways.

Pintsize725 · 12-07-2013, 03:35 PM

Got her wheels balanced. Will need new rears soon. :/

DatsunFTW · 12-07-2013, 04:07 PM

Got these in the mail yesterday from Luciano

I put them on the ground to test the looks of them before going off to work

. Very busy lately and will be for a couple of weeks so I have no time to put them on yet....

Will be on soon enough and will turn my sexy red Zed into a sexier red Zed

20131207_161417 by datsunpride, on Flickr

20131207_161539 by datsunpride, on Flickr

Waiz · 12-07-2013, 06:01 PM

Bought this last night and just used it on my Z and my Fit

12 Volt, 100 PSI High Volume Air Compressor

Rears were at 30 on the Z and took it up to 35 in little over a minute, gas station air pump be damned!

roy'sz · 12-07-2013, 07:40 PM

Quote:

Originally Posted by Waizzz

Bought this last night and just used it on my Z and my Fit

12 Volt, 100 PSI High Volume Air Compressor

Rears were at 30 on the Z and took it up to 35 in little over a minute, gas station air pump be damned!

I heard those are pretty stout compressors for their size.

Fountainhead · 12-07-2013, 08:07 PM

Quote:

Originally Posted by roy'sz

I heard those are pretty stout compressors for their size.

Yeah I got a compressor for my garage and I never looked back!
So nice to be able to do air on my terms instead of waiting in line or driving up and the thing is broken.....AND took my money!

Xavier6401 · 12-07-2013, 06:24 PM

Put on my new badge, new license plate frame and installed the GTR start button!

SPOHN · 12-07-2013, 06:56 PM

Sent manifold off to Z1 to be ported.

osirus · 12-07-2013, 06:57 PM

Christmas time came a ill early. Drove out and secured new apartment Yay! And then got these on Xmas deal. #Focalftw

Sent from my iPad using Tapatalk

12-07-2013, 01:25 PM	#7 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 38 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 70	Installed a Kenwood DNX7160 last night. Easy install using the factory brackets from the Bose headunit and Metra wiring harness for the Bose, but I left out the PAC-SWI and reverse camera for now. I'll be installing a full CF Amuse replica in a couple months and will have to pull it all apart again anyways. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

12-07-2013, 03:35 PM	#8 (permalink)
Pintsize725 A True Z Fanatic Join Date: Jan 2012 Location: Austin Posts: 14,196 Drives: 2016 Mazda 6 Rep Power: 211845	Got her wheels balanced. Will need new rears soon. :/ __________________ Tracie

12-07-2013, 04:07 PM	#9 (permalink)
DatsunFTW A True Z Fanatic Join Date: Apr 2013 Location: Gainesville, FL Posts: 1,234 Drives: 12 370z A54 M6 Rep Power: 380	Got these in the mail yesterday from Luciano I put them on the ground to test the looks of them before going off to work . Very busy lately and will be for a couple of weeks so I have no time to put them on yet.... Will be on soon enough and will turn my sexy red Zed into a sexier red Zed 20131207_161417 by datsunpride, on Flickr 20131207_161539 by datsunpride, on Flickr __________________ The Build

12-07-2013, 06:56 PM	#14 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 222	Sent manifold off to Z1 to be ported. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5D3 Discussion	FrancoPhoto	Photography	6	07-09-2012 12:08 AM
[Off Topic,GTA]Who dares to drive in the snow tonight with their Z?	Da.Menace	Canada	11	02-05-2011 05:43 PM
Double Din Dvd/Nav Feedback Topic	Carbon_z	Audio & Video	7	11-19-2010 11:10 AM
on the topic of oil ??	sonic370	Nissan 370Z General Discussions	5	07-17-2010 09:50 PM
Lounge (Off Topic) Rules	AK370Z	The Lounge (Off Topic)	0	09-23-2008 07:19 PM

12-07-2013, 05:20 PM	#3 (permalink)
nmjaxx9 A True Z Fanatic Join Date: Jul 2011 Location: Middletown, Ct Posts: 5,853 Drives: 2011 Nissan 370z Rep Power: 27	Whos in this biotch, drove the Z to work and detail later. Also ordered another key fob.

12-07-2013, 09:55 AM	#4 (permalink)
Wonderbread Base Member Join Date: Nov 2013 Location: Baltimore Posts: 31 Drives: 2009 370 Rep Power: 12	Had the Stillen G3 CAI delivered and installed same day. I have no patience. Special thanks to AK370Z for his DIY.

12-07-2013, 06:01 PM	#10 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 460	Bought this last night and just used it on my Z and my Fit 12 Volt, 100 PSI High Volume Air Compressor Rears were at 30 on the Z and took it up to 35 in little over a minute, gas station air pump be damned!

12-07-2013, 06:24 PM	#13 (permalink)
Xavier6401 Base Member Join Date: Jul 2013 Location: Blacksburg, Va Posts: 68 Drives: '11 Solid Red 370z Rep Power: 13	Put on my new badge, new license plate frame and installed the GTR start button!

12-07-2013, 06:57 PM	#15 (permalink)
osirus Base Member Join Date: Oct 2013 Location: Dallas,TX Posts: 183 Drives: 11 Nissan 370Z MB M6 Rep Power: 12	Christmas time came a ill early. Drove out and secured new apartment Yay! And then got these on Xmas deal. #Focalftw Sent from my iPad using Tapatalk