What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

dmhenderson · 02-07-2013, 06:17 PM

What do those run? I kinda want one to replace the nismo oil cooler.

SurfDog · 02-07-2013, 07:20 PM

Quote:

Originally Posted by dmhenderson

What do those run? I kinda want one to replace the nismo oil cooler.

I'm getting mine done at a shop. Part is a bit under $400.00.

SurfDog · 02-07-2013, 07:22 PM

A lot Jess than the passport 9500ci the dudes are putting in as I watch right now ($2000 bucks installed. Whew!)ImageUploadedByTapatalk1360286557.650483.jpg

See anything suspicious????

darkside370z · 02-07-2013, 07:24 PM

installed my Invidia Gemini full catback this afternoon. install was a breeze, took me about an hour and a half to do the full swap in my garage. i'll try to get some pics posted up later this weekend

SurfDog · 02-07-2013, 07:25 PM

ImageUploadedByTapatalk1360286638.979758.jpg

lol It's a work in progress.

dmhenderson · 02-07-2013, 07:26 PM

Eh I don't track the car. I think I'll look at spacers instead.

SurfDog · 02-07-2013, 07:37 PM

Some pix of the (installation in progress radar detector with (switched off) laser shifters.
ImageUploadedByTapatalk1360287129.448134.jpg
ImageUploadedByTapatalk1360287164.380952.jpg ImageUploadedByTapatalk1360287321.481715.jpg ImageUploadedByTapatalk1360287416.673038.jpg

TheW3r3W0lf · 02-07-2013, 09:08 PM

Hey all, new here and haven't made my proper intro on the forums but had this done today and wanted to share. I replaced the factory catalytics with GTM resonated test pipes (GTM-HR000-R) using Z1 metal HR/HVR gaskets. The Nissan has a bit of a growl to it now and is much happier in the 45-6600 rpm range. Not planning on doing much else aside from a tune until the warranty runs out but thought these looked pretty tucked up under there. Enjoy!

ps- Sorry if I am posting any of this incorrectly- first post!

onzedge · 02-07-2013, 09:45 PM

Quote:

Originally Posted by TheW3r3W0lf

Hey all, new here and haven't made my proper intro on the forums but had this done today and wanted to share. I replaced the factory catalytics with GTM resonated test pipes (GTM-HR000-R) using Z1 metal HR/HVR gaskets. The Nissan has a bit of a growl to it now and is much happier in the 45-6600 rpm range. Not planning on doing much else aside from a tune until the warranty runs out but thought these looked pretty tucked up under there. Enjoy!

ps- Sorry if I am posting any of this incorrectly- first post!

Welcome -- you are doing fine.

Waiz · 02-07-2013, 10:02 PM

Finally got all my detailing stuff in!

axmea? · 02-07-2013, 11:49 PM

Waizzz -- Can I get in line?

axmea? · 02-08-2013, 01:59 AM

After a week in the shop because of this..........

I ended up with this..........I had a new kit installed

Thanks to Sin and Rick at AeroJacket!!!!

Waiz · 03-11-2013, 12:34 PM

Quote:

Originally Posted by Eagle

Used AK's DIY Oil Change post to guide me in my quest for a quick and easy oil change. Thanks for the great write up AK!

Here's a photo of the factory oil cooling component on my 2012

Interesting photo!

Quote:

Originally Posted by Waizzz

Finally got all my detailing stuff in!

I finally got a chance to try this stuff out and it really removed some of the major blemishes in my paint. Overall it's definitely worth the cost but I just need to revise my technique

shadowfax · 02-08-2013, 02:10 AM

My sweet beautiful cat of 16 years passed today, so I took the Z out driving, hard.

It helps a bit.

axmea? · 02-08-2013, 02:15 AM

Quote:

Originally Posted by shadowfax

My sweet beautiful cat of 16 years passed today, so I took the Z out driving, hard.

It helps a bit.

Sorry 'bout that.

02-07-2013, 06:17 PM	#1 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 27	What do those run? I kinda want one to replace the nismo oil cooler. __________________

02-07-2013, 07:22 PM	#3 (permalink)
SurfDog A True Z Fanatic Join Date: May 2012 Location: Colorado (9000 feet) Age: 57 Posts: 1,796 Drives: 09 6mt, 13 Sequoia, Rep Power: 15750	A lot Jess than the passport 9500ci the dudes are putting in as I watch right now ($2000 bucks installed. Whew!)ImageUploadedByTapatalk1360286557.650483.jpg See anything suspicious???? __________________ 09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix

02-07-2013, 07:24 PM	#4 (permalink)
darkside370z Base Member Join Date: Apr 2011 Location: Horseshoe Bay, TX Posts: 226 Drives: 2017 KAD 370Z Rep Power: 52	installed my Invidia Gemini full catback this afternoon. install was a breeze, took me about an hour and a half to do the full swap in my garage. i'll try to get some pics posted up later this weekend __________________

02-07-2013, 07:25 PM	#5 (permalink)
SurfDog A True Z Fanatic Join Date: May 2012 Location: Colorado (9000 feet) Age: 57 Posts: 1,796 Drives: 09 6mt, 13 Sequoia, Rep Power: 15750	ImageUploadedByTapatalk1360286638.979758.jpg lol It's a work in progress. __________________ 09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix

02-07-2013, 07:26 PM	#6 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 27	Eh I don't track the car. I think I'll look at spacers instead. __________________

02-07-2013, 07:37 PM	#7 (permalink)
SurfDog A True Z Fanatic Join Date: May 2012 Location: Colorado (9000 feet) Age: 57 Posts: 1,796 Drives: 09 6mt, 13 Sequoia, Rep Power: 15750	Some pix of the (installation in progress radar detector with (switched off) laser shifters. ImageUploadedByTapatalk1360287129.448134.jpg ImageUploadedByTapatalk1360287164.380952.jpg ImageUploadedByTapatalk1360287321.481715.jpg ImageUploadedByTapatalk1360287416.673038.jpg __________________ 09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix

02-07-2013, 09:08 PM	#8 (permalink)
TheW3r3W0lf Base Member Join Date: Feb 2013 Location: Arizona Posts: 111 Drives: 2012 Z34 Nismo- SOLD Rep Power: 13	Hey all, new here and haven't made my proper intro on the forums but had this done today and wanted to share. I replaced the factory catalytics with GTM resonated test pipes (GTM-HR000-R) using Z1 metal HR/HVR gaskets. The Nissan has a bit of a growl to it now and is much happier in the 45-6600 rpm range. Not planning on doing much else aside from a tune until the warranty runs out but thought these looked pretty tucked up under there. Enjoy! ps- Sorry if I am posting any of this incorrectly- first post!

02-07-2013, 10:02 PM	#10 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 460	Finally got all my detailing stuff in!

02-07-2013, 11:49 PM	#11 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,243 Drives: WELL ZED PW 6MT Rep Power: 53242	Waizzz -- Can I get in line? __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

02-08-2013, 01:59 AM	#12 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,243 Drives: WELL ZED PW 6MT Rep Power: 53242	Big Day. I finally got it back After a week in the shop because of this.......... I ended up with this..........I had a new kit installed Thanks to Sin and Rick at AeroJacket!!!! __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete Last edited by axmea?; 02-08-2013 at 03:48 AM.

02-08-2013, 02:10 AM	#14 (permalink)
shadowfax Base Member Join Date: Jan 2013 Location: California Posts: 93 Drives: 2013 Sport PW A7 Rep Power: 13	My sweet beautiful cat of 16 years passed today, so I took the Z out driving, hard. It helps a bit. __________________ "Run Shadowfax. Show us the meaning of haste." http://www.youtube.com/watch?v=RvZkMaEU04g

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5D3 Discussion	FrancoPhoto	Photography	6	07-09-2012 12:08 AM
[Off Topic,GTA]Who dares to drive in the snow tonight with their Z?	Da.Menace	Canada	11	02-05-2011 05:43 PM
Double Din Dvd/Nav Feedback Topic	Carbon_z	Audio & Video	7	11-19-2010 11:10 AM
on the topic of oil ??	sonic370	Nissan 370Z General Discussions	5	07-17-2010 09:50 PM
Lounge (Off Topic) Rules	AK370Z	The Lounge (Off Topic)	0	09-23-2008 07:19 PM