washed and waxed, going on a 300 mile trip next week

Was about 120 degrees all weekend so no road trips for me! Instead cranked down the AC in the garage and swapped the Meisterschaft front and mid pipe for the Nismo ones again since I couldn't hear myself think. The factory resonators really quiet it down but since I am running test pipes it still roars. The Meisterschaft muffler sounds awesome and looks great under the tail.

Yay, drivable again.

My z stayed home T.T I had to drive the SUV to fresh meet in at kean. So sad -.-

Did you see my vid on how good it repels water?
It is best used pre wax but can be used post. It is not glaze, but a sealant that acts like a "shell" to protect the paint. It can be used as a stand alone without wax (that is how it is in the vid). I always apply after a good cleaning and clay bar'ing.
It can be used by one of the foam applicator pads but I use a fine microfiber cloth. It is aerosol spray, and is sprayed onto the cloth. Wipe it on in small sections, then use another fine micro to buff it off. The longer it sets, the harder it is to buff off.
After applied, it is not as smooth as after wax, but still feels pretty smooth.

Took a trip to the lake!
http://www.the370z.com/members/zscr3...e68453-162.jpg

Man, I have no idea why but that Z looks so, I don't know, seamless? Not sure if it's the sky and car color combo, or the black tires or the no spoiler but it sure looks good!

15% off at detailersdomain with free shipping above 75$. I'm sure I can get there ;)


Sent from my iPhone using Tapatalk

Thanks bro!

Gonna order another stillen splitter for her. :)

Forgot to post Saturday because was going to post graph. But went to dyno Saturday.

Don't know what my baseline was before mods but with berk hfc, aem cai, oem nismo exhaust.....
298hp
260 tq

Ok, I just have to know is your paint an eggshell type flat finish or did you shop the image? I have a gunmetal gray so that's out of the question!

Now I want a blue Z!

I think he said its plasti dip


Sent from my iPhone using Tapatalk

Canada Day cruise with some forum members. Mr.alcheng was the master trip planner, good cruise :tup:

https://fbcdn-sphotos-h-a.akamaihd.n...58551357_n.jpg

Yeah its a matte plastidip.

I cleaned my filters on the CAI!

Started her up after 10 months, changed the oil, updated the NYS inspection sticker and promptly installed ART pipes!

I installed my GTR start button, GTR lens kit with red leds and white leds to my rears just right now.. I love it!! My first ever mods that I did myself! Yay! It felt good! Attachment 72285Attachment 72286Attachment 72287Attachment 72288Attachment 72289Attachment 72290Attachment 72291Attachment 72292


Sent from my iPhone using Tapatalk- faya baby!

Just a heads-up, the sticky backing on those LED pods melts pretty easily. You may want to get some loctite or something to hold them in place.

:happydance:
I left Harry home today.
:happydance:

THANK YOU BABY JESUS!!!


Hail storm on the way home from work! :eek:
No damage but can you imagine!!! Omfg!!!

:tup:

So true -- the double sided tape is a joke.

Good call. You have chosen wisely.

thanks!:tup:

Angrily took off my evo-r rear diffuser, it just will not stay on and fits like poo, so disappointing, I get compliments on it all the time...looks like its time to black out the rear...

Splurged on DetailersDomain. Bought that Sonax poly seal stuff, a gallon of their detail spray, some more deep wheel/iron cut stuff and a some dash shine stuff. Shipped yesterday so hopefully I'll get it in time for my 4th detail session

Sweet! 15% off everything at Detailers Domain right now!

Yep, they were cool and even told me to wait a day to place my order. Also free shipping for anything over $75

rolled car back 10inches in prep for tomorrow.

Those are good guys.

DD is where I order all my cleaning supplies from. I love the black uber micro towels to use as wash mits.

Installed my GTR button last night. Tonight I will be installing my illuminated kick plates.

I left the Z in my the garage, but went to the Jeep dealer and came home with this...



http://www.the370z.com/members/rn-sh...e68551-srt.jpg

clearbra'ed my Z

http://www.the370z.com/members/kench...-clearbra3.jpg

Ordered exhaust wrap, wire twisting pliers, and DIY bedliner (for inside floor pan)

What did you use?

Nice Jeep RN

Took her to get her first Dyno.
Attachment 72382

Very Nice. My wife and I looked at these when we were in Long Beach for the Grand Prix. :tup:

That's a pretty freaky dyno graph... :ugh2:

Good numbers though.

Yeah i dont know wtf happened there at the end! lol

hey waizzz. :D i used xpel utimate.

Sweet! :tup: Beats what I brought home today.

https://fbcdn-sphotos-c-a.akamaihd.n...31146073_n.jpg

Unfortunately I needed something that is somewhat reasonable on fuel.