I've found the Magma Red and Pollen Yellow to be a viable combination. But it's proving to be a longer-term combination than I had hoped.

Washed the wheels. Ever since painting them black they get so dirty(obviously) lol. Also took advantage of the sale at advance auto parts.

Two 64oz bottles of mothers california gold carnauaba wash & wax for 10 bucks and you also get a free bucket!
picked up the absorber towel, meguiars nxt tire shine. Just need to order a good MF wash mit and bucket grit guard.

Pulled over yesterday for tinted rear license plate cover and tints..and pulled over today by state police for no front plate and tinted rear license plate cover. Let off both times because you don't mess with me :tup: jk, pba cards help.

There are some advantages of living in a completely corrupt state, I suppose.

Got alot done today...but I missed the Master's tournament final :-( (got it dvr'd though so no worries :-))
Installed my Gen 3 and replaced all my hoses today - what a pain in the rear! Got alot more done also - but I am to wore down to list it all. GN all

Mountain run on the BRP today. Don't speed too much on the BRP b/c it's Federal land and they rarely issue warnings if at all. Now running up HWY 215 to the BRP was a different story.


Sent from my Lumia 1020 using Tapatalk

finally, after a friendly-fee alternative price, was able to have a home garage installed FI oil cooler/GTM 2qt. pan/ZSPEED shroud for $160...took about 6 hrs. and my man, ryan, was very exacting and completely pro...

hats off...and, temps down!!!...thx, ryan...

Ordered a new set of rear tires....again. lol

What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)
 

Stillen Adjustable Rear Sway Bar Installed
http://img.tapatalk.com/d/14/04/14/upuveqy5.jpg
http://img.tapatalk.com/d/14/04/14/getuse4y.jpg

New Pedals Installed
http://img.tapatalk.com/d/14/04/14/umy5ysup.jpg

Took the Z to work tonight. Once I gone all of my work caugh up and finished. I detailed the inside of it. :D Killed a lot of dust bunnies. :rofl2:

Did an awesome photo shoot in Seattle yesterday.

Dropped her off at the body shop to have a full carbon fiber Amuse replica kit installed.

Nice! how do you like them over stock? I am thinking doing the same upgrade next

Two things:

1. Enjoyed watching my 83 year old dad "try" to get in and then out of my car. I gave him a tip, but I know when I reach that age I'll struggle as well.

2. Got my first "hand wave" (and no, not the middle finger) from a Z brother who responded to my hand wave. I'm surprised it took a year.

put it on a battery tender since I won't be driving it for a month :crying:

What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)
 

Second attempt at swapping out my suspension. I guess the Incredible Hulk tightened the nuts on my struts. Next up. Nut splitter. (obligatory jokes to follow)

http://www.the370z.com/members/bossl...ed-4-14-14.jpg

Better!

after seeing them cups in someone's intake, i went ahead and checked the kn drop-ins.
no such cups in my car. lol but i did notice small leaves inside so cleaned that out.

The UPS man was nice to me today

uhhhh... are you missing a car? :ugh:

:facepalm: damnit I did it again....

:tup:

:icon17:

yesterday i installed my mag blue TE37SLs and today I pulled off my stock spoiler (with only non-visible dmg occuring to one snap bracket holder hole on the spoiler). Tomorrow my aerojacket type 3 wing gets put on. been a good week:happydance:

I've got a red Nismo rear bumper on my balcony now.

Finished my Swifts Saturday and completed my Uprev tonighthttp://img.tapatalk.com/d/14/04/16/japepu5u.jpghttp://img.tapatalk.com/d/14/04/16/a3ebe4ud.jpghttp://img.tapatalk.com/d/14/04/16/yhugatyq.jpg

Sent while driving!

nice hitch spring compressor :tup:

Thanks. Just part of being a mobile mechanic.. Sometimes you have to improvise.

Sent while driving!

wanted to tak emy Z to work this morning but it wouldn't start :(

Someone was saying it could be the battery, going on 4 years could need a change and not to mention this thing could be sucking up juice :D

Happy to finally get it installed. Air Motion Cup Suspension

Air Motion Cup Suspension Nissan 370Z - YouTube

Llumar CTX 30% tint on sides & back today
http://www.the370z.com/members/blu-z...mar-ctx-30.jpg

Good color choice.

:iagree:

Got approached by a guy in my parking lot that said I had a nice car and asked if I attended car shows.




I need to get a quote on repainting this bad boy.
http://i7.photobucket.com/albums/y29...psddwxkevg.jpg

i got a thumbs up from a neon again ;) gave her a quick bath, going to a car meet tomorrow

Tomorrow's Plan:

Install Stillen lightweight pulley and Gates Blue Belt

Install stainless braided clutch line and flush with Motul 5.1

Install Z1 silicone radiator hoses

Oil change with Red Line 5/30 and K&N Pro

:confused: $5 one can of plasti-shitt? :ugh:

:iagree:

I took ss_firehawk out for a joy ride and showed him why ya don't mess with the grey ghost. We hit 25.9lbs of boost which makes ya hold onto your arse :icon18: It's always good to meet other Z forum members :tiphat:

picked up my car today from the body shop. finally got my hood fixed (some a$$holes threw a can at my hood a couple months back), refinished the front bumper for rock chips, and installed some CS V1 fenders :happydance:

http://img.photobucket.com/albums/v2...ps1fdf6482.jpg

just a quick cell phone shot. hopefully i can get better pictures tomorrow with a real camera.

Installed new upper ball joints from kinetix yesterday and got it aligned, today I need to drive it a while to see if my suspicions from yesterday are correct that it was drifting to the right. Other than that maybe a wash and wax.