Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Nissan 370Z General Discussions (http://www.the370z.com/nissan-370z-general-discussions/)
-   -   What did you do with your Z today IV (http://www.the370z.com/nissan-370z-general-discussions/56017-what-did-you-do-your-z-today-iv.html)

happytheman 07-01-2012 05:40 PM

Quote:

Originally Posted by agrotech (Post 1800679)
Finally got around to installing my Swift Spec-R springs and H&R DRS 20mm spacers.

:pics:

:worthless:

m4a1mustang 07-01-2012 06:13 PM

Quote:

Originally Posted by Red__Zed (Post 1800851)
Solution-- sell roughly $5k worth of parts off the 5.0 to me to help fund this adventure :|

:bowrofl:

Quote:

Originally Posted by kenchan (Post 1800856)
Mustang- I'd keep ur car if you still enjoy it....especially if its paid off. :tup: if not paid off then its a tuff decision but at least you got to enjoy it. :tup:

Yeah as long as I am enjoying it as much as I am I'm going to keep it. Same thing with the S2000.

Quote:

Originally Posted by alcheng (Post 1800862)
Mr.m4a1mustang... solution to your problem ===> Work Your A$$ Off. :tiphat:
http://sphotos.xx.fbcdn.net/hphotos-...83593789_n.jpg

:hello: :hello:

:iagree:

Big week starts tomorrow. Big changes at the office... hopefully everything goes smoothly, but I know they won't. Should be working long hours again for the next week or two. :tup:

happytheman 07-01-2012 06:40 PM

Quote:

Originally Posted by kenchan (Post 1800592)
Wtf major stormage... rain from the side 65mph winds seepage into house from the tall windows. :mad:
and QD'd afterwards. :p

Had about half a bucket of water collected with my towels from the window sills and floor. :ugh:
luckly my power did not go down thanks to eating snacks earlier. Oh wait, power to the house did not go down so have several fans running. :tup: Should be all dry by evening. Disinfected the sills and floors.

Wth man?! Why did the rain get in? I'm sorry to hear about your day.... :(

GaleForce 07-01-2012 06:42 PM

Quote:

Originally Posted by happytheman (Post 1799651)
What kind of beer is that Gale?

I love your restraint!

Check out the little brewery here - Church-Key Brewing Company

The owner has been working in the business since he was 16. He put in many years at Molsons, or Labbats (I don't remember which). He took all his experience and knowledge to start Chuch-key Brewing Co. 12 years ago. :yum:

SPOHN 07-01-2012 06:49 PM

New wing end plates on the the way. Thanks to my sponsor APR Perfromance.

GaleForce 07-01-2012 06:58 PM

Quote:

Originally Posted by kenchan (Post 1799935)
mr.onzedge - nice! :tup: and i like how your son parks your Z. :tup: that's the kind of VIP service/treatment i'd bring my car to. :tup:



oh wow, that looks beautiful!!! :tup:

:barf:



:happydance:

:barf:



like me after eating thai food. :barf:



nice! :tup:



i have cameras set up around my house. when such dispute arises, i check footage to the exact date/time and see for myself what happened. a cheap network camera can be had for like 100+ with great results if you dont need night vision. and it can be setup from inside the house if you want. :)

it rids solicitors too as i can send the picture to our neighborhood watch program if i see the same face more than twice. i like the folk's facial expressions on these intentionally partially hidden cameras. :icon17:



lol! :rofl2:

hello, mr.alcheng! the gopro footage exposure was very good today. :tup: woooot! i think i found my optimal angle and height. :p



good job! :tup: yah, even the Z's stock speakers come a live with my pioneer's 3band parametric EQ + DSP. :D



the370Z.com.... :confused:



hi jar! :hello: yah, i dont do this on my honda Fit at all. my G gets special treatment too. wash or sprayon car wash every Friday and only if it's nice out does she come out to play on Sat afternoon. otherwise sleeping sipping on battery manager until next work day. :icon17:

hi mr. gale- you have a might fine looking kitchen too. :tup: enjoy your 2 beers. :icon17: that quick release tripod mount was just the regular adhesive mount less the adhesive + 1/4" screw hole epoxyed to the bottom of the quick release. not the cleanest work but it's functional. im going to clean it up some more and dinoc the surround to make it look more appealing (not yet Z-worthy look.. lol :icon17: )

We love our kitchen. I just rebuilt the cabinet where the microwave is now located. We used to have an Over the range microwave. That was our only mistake in the kitchen. The exhaust fans on those are loud and useless. It bothered me so much that I ordered a semi-commercial range hood, very quiet being only 1.5 sones at the low setting and 4 sones at the high setting. Also cranking out 960 CFM at the high setting with an 8" exhaust. Then I had to redo the marble backsplash, and of course figure out how/where to install a new microwave in our custom maple cabinets. The brutal thing was, the cabinets have a custom 12 step finish, and the company who originally made them for us went out of business. With a little patience, I was able to modify a door front with out disturbing the finish, and built a drawer under the microwave. Now I can sleep. :tup:

I was thinking if making my own mount after seeing the one you bought. I thought from the link you shared, the guy made a whole new mount. If its just an epoxied 1/4" nut, I'll definitely make my own.

GaleForce 07-01-2012 06:59 PM

Quote:

Originally Posted by onzedge (Post 1800048)
Just go with Berk and be done with it.

:iagree:

GaleForce 07-01-2012 07:09 PM

I'm awake now Mr.alcheng :hello:

We had a great night with friends last night, tried to share my Lager. These guys have trained their tongues to love the cheap stuff. They said the lager was too strong tasting. I didn't notice, but I like my beer to taste like beer and not flavored water. :rofl2:

I took the family out for breakfast this morning, then spent the rest of the day with them at the waterfront festival, doing family things, etc. Getting caught up now. :tup:

Srenity 07-01-2012 07:14 PM

Quote:

Originally Posted by GaleForce (Post 1800962)
I'm awake now Mr.alcheng :hello:

We had a great night with friends last night, tried to share my Lager. These guys have trained their tongues to love the cheap stuff. They said the lager was too strong tasting. I didn't notice, but I like my beer to taste like beer and not flavored water. :rofl2:

I took the family out for breakfast this morning, then spent the rest of the day with them at the waterfront festival, doing family things, etc. Getting caught up now. :tup:

Being up in Canada and liking craft beer do you like the stuff from Unibroue?

kenchan 07-01-2012 07:23 PM

Quote:

Originally Posted by GaleForce (Post 1800955)
We love our kitchen. I just rebuilt the cabinet where the microwave is now located. We used to have an Over the range microwave. That was our only mistake in the kitchen. The exhaust fans on those are loud and useless. It bothered :inoutroflpuke:3me so much that I ordered a semi-commercial range hood, very quiet being only 1.5 sones at the low setting and 4 sones at the high setting. Also cranking out 960 CFM at the high setting with an 8" exhaust. Then I had to redo the marble backsplash, and of course figure out how/where to install a new microwave in our custom maple cabinets. The brutal thing was, the cabinets have a custom 12 step finish, and the company who originally made them for us went out of business. With a little patience, I was able to modify a door front with out disturbing the finish, and built a drawer under the microwave. Now I can sleep. :tup:

I was thinking if making my own mount after seeing the one you bought. I thought from the link you shared, the guy made a whole new mount. If its just an epoxied 1/4" nut, I'll definitely make my own.

Wow, sounds amazing, mr.gale. :tup: our kitchen is just a regular kitchen. Nothing fancy. :ugh: my wife's a great chef so its kind of a waste not having a great kitchen.

Thanks mr.alcheng. its sunny here still and forecast looks dry for a few days. This is the first time I've seen this happen here. Very glad I was home. :D

Happy- yah the wind was very strong and hitting the house sideways. Usual storms hitting sideways is np, but today's storm was much stronger. It overwhelmed the sliding door bottom rails. The upper windows were fine. Also checked the vents and they all seem fine. Not sure if I lost any shingles though... :ugh2:

Right now working on dinoc-ing the cup holder trim. I can tell I've not been doing dinoc by how my thumb feels like 1st degree burn from the heat gun. :icon17:

m4a1mustang 07-01-2012 07:28 PM

I took a snap of the HU on my way home.

https://lh6.googleusercontent.com/-A...701_182801.jpg

GaleForce 07-01-2012 07:41 PM

Quote:

Originally Posted by Srenity (Post 1800966)
Being up in Canada and liking craft beer do you like the stuff from Unibroue?

I haven't tried it. They were Canada's largest micro brew. I remember reading in the news years ago that Sleeman bought them. Have you tried Unibroue since Sleeman Breweries bough them?

ZMan8 07-01-2012 07:43 PM

Quote:

Originally Posted by m4a1mustang (Post 1800832)
I have a dilemma. So while the 5.0 was parked I was thinking about selling it and DDing the S2000 to help with a down payment on a house. I came up with about $5k in mods for the S2K that I'd want to do to DD it year-round.

Well, since I sorted the 5.0 out and took it for a nice drive I have quickly tossed the idea of selling it. Its just way too much fun and I can't live without some power in my life.

The problem is now I have a list of $5k in parts I still want for the s2k :|

Sent from my Galaxy Nexus using Tapatalk 2

Can't live without power :tup: I had similar thoughts for same reasons (buying a house) however, one drive will make you quickly forget such nonsense :rofl2:

Quote:

Originally Posted by kenchan (Post 1800856)
Thanks zman! Its sunny now and everything looks to have dried up inside the house. I checked around my garage and everything was ok. :tup: need to do some brooming later... mulch all over the sidewalk.


Mustang- I'd keep ur car if you still enjoy it....especially if its paid off. :tup: if not paid off then its a tuff decision but at least you got to enjoy it. :tup:

:tup: Mr. Kenchan

Steve: :iagree: enjoy the beast!

Quote:

Originally Posted by alcheng (Post 1800862)

Mr.m4a1mustang... solution to your problem ===> Work Your A$$ Off. :tiphat:

I like that too! I am considering after I finish my CPA testing to get a part time job (<20 hours per week) to fund my enthusiast addiction.

Quote:

Originally Posted by SPOHN (Post 1800943)
New wing end plates on the the way. Thanks to my sponsor APR Perfromance.

:tup::happydance::driving: Got to love sponserships. Im glad you are making progress on getting the car back into shape. It will come back better than before. :yum:

NBZ34 07-01-2012 07:44 PM

4 Attachment(s)
Quote:

Originally Posted by happytheman (Post 1800882)
:pics:

:worthless:

Here ya go!

Sent from HTC EVO using Tapatalk 2

kenchan 07-01-2012 09:45 PM

here it is... thanks to my burnt thumb. lol :icon17:

http://www.the370z.com/members/kench...27-pre-cup.jpg

http://www.the370z.com/members/kench...6-post-cup.jpg

http://www.the370z.com/members/kench...nished-cup.jpg

m4a1mustang 07-01-2012 09:47 PM

Nice work Ken!

kenchan 07-01-2012 09:51 PM

Quote:

Originally Posted by m4a1mustang (Post 1801165)
Nice work Ken!

thanks, mustang. :tup:

kenchan 07-01-2012 09:52 PM

Quote:

Originally Posted by m4a1mustang (Post 1800980)
I took a snap of the HU on my way home.

https://lh6.googleusercontent.com/-A...701_182801.jpg

nice~! :tup: i likes. :yum:

alcheng 07-01-2012 10:00 PM

Quote:

Originally Posted by m4a1mustang (Post 1800980)
I took a snap of the HU on my way home.

https://lh6.googleusercontent.com/-A...701_182801.jpg

Nice Work Steve... although I am not a fan of green.... :ugh2:
http://1.bp.blogspot.com/_1qPLMlz01y....+13+10.33.jpg


Quote:

Originally Posted by kenchan (Post 1801162)
here it is... thanks to my burnt thumb. lol :icon17:

http://www.the370z.com/members/kench...nished-cup.jpg

:tup: NJ Mr.kenchan !

Huck 07-01-2012 10:09 PM

Quote:

Originally Posted by kenchan (Post 1801162)

Dude, I love that last pic! Looks profesh!

m4a1mustang 07-01-2012 10:09 PM

I am going to change the display to orange to match the gauges

Sent from my Galaxy Nexus using Tapatalk 2

onzedge 07-01-2012 10:10 PM

Quote:

Originally Posted by m4a1mustang (Post 1801165)
Nice work Ken!

:iagree:

kenchan 07-01-2012 10:22 PM

Quote:

Originally Posted by alcheng (Post 1801184)

:tup: NJ Mr.kenchan !

thanks mr.alcheng! :D that ringu movie scared the crap out of me. :eek: :rofl2:


Quote:

Originally Posted by onzedge (Post 1801195)
:iagree:

thank you, mr.onzedge. :D

kenchan 07-01-2012 10:22 PM

Quote:

Originally Posted by m4a1mustang (Post 1801194)
I am going to change the display to orange to match the gauges

Sent from my Galaxy Nexus using Tapatalk 2

now that would be even more :yum: :tup:

Pintsize725 07-01-2012 11:03 PM

Finally checking in. Just got back from washing and waxing the Z. :)


Unrelated Z stuff: If anyone wants to buy a NIB sprint evo lte, contact me. :)

alcheng 07-01-2012 11:09 PM

Quote:

Originally Posted by m4a1mustang (Post 1801194)
I am going to change the display to orange to match the gauges

Sent from my Galaxy Nexus using Tapatalk 2

Sweet.... :icon17:


Quote:

Originally Posted by kenchan (Post 1801212)
thanks mr.alcheng! :D that ringu movie scared the crap out of me. :eek: :rofl2:

Mr.kenchan, that green reminds me the Passat I once driven 13 yrs ago... everything in side is GREEN... :ugh2:


Quote:

Originally Posted by Pintsize725 (Post 1801280)
Finally checking in. Just got back from washing and waxing the Z. :)


Unrelated Z stuff: If anyone wants to buy a NIB sprint evo lte, contact me. :)

Hello Tracie :hello:

Srenity 07-01-2012 11:18 PM

Quote:

Originally Posted by GaleForce (Post 1801002)
I haven't tried it. They were Canada's largest micro brew. I remember reading in the news years ago that Sleeman bought them. Have you tried Unibroue since Sleeman Breweries bough them?

I did not know about any ownership change but I have had thier stuff as recently as last weekend so yeah I guess I would have drank the newest ownerships beer. I bought a variety 4 pack at a craft beer market here in CA. My favorite from them is called Terrible. It is far from terrible. It is a dark belgium style ale with good malt character. High Alcohol content too. Know I want a beer!!!!

As for my Z I washed and Clayed today. Ran out of time so tomorrow I am going to apply Adams Quick Sealant.

kenchan 07-01-2012 11:25 PM

Quote:

Originally Posted by alcheng (Post 1801284)

Mr.kenchan, that green reminds me the Passat I once driven 13 yrs ago... everything in side is GREEN... :ugh2:


mr.alcheng- yah, i'd prefer amber too as mustang said he can switch colors to. :tup:

he there, pint! :tup:

so i was cking out TWM's site thinking i'll take advantage of their promo-code they sent me this am to use... the promo code doesn't work. :confused: been wanting to get the big type-r knob for a long time.

Lemers 07-01-2012 11:44 PM

I just finish a trip from Boerne Tx near San Antonio to Leavenworth Ks in my Z. 834 miles in 14 hrs.

alcheng 07-02-2012 12:17 AM

Quote:

Originally Posted by kenchan (Post 1801297)
mr.alcheng- yah, i'd prefer amber too as mustang said he can switch colors to. :tup:

he there, pint! :tup:

so i was cking out TWM's site thinking i'll take advantage of their promo-code they sent me this am to use... the promo code doesn't work. :confused: been wanting to get the big type-r knob for a long time.

The Big Typr-R does look pretty good...! :tup:

Which color are you looking at?? Gun-Metal and Mirror are pretty nice...

Any fine print for the promo-code such as valid day?? :ugh2:

Hope you can sort it out.. :icon17:

Man... so TWM is discounting their knobs.... eh?? :bowrofl: :bowrofl:


Quote:

Originally Posted by Lemers (Post 1801321)
I just finish a trip from Boerne Tx near San Antonio to Leavenworth Ks in my Z. 834 miles in 14 hrs.

Nice dude, sounds like some distant fun driving... does your butt fused into the seat??

BTW, seriously, how many tanks do you have to fill??

kenchan 07-02-2012 06:55 AM

Hahaha, mr.alcheng. :icon17:

Goodam everyone! :hello:

m4a1mustang 07-02-2012 07:08 AM

Power out at the office so I'm working from home today. Not a good time for no power!

Red__Zed 07-02-2012 07:08 AM

Quote:

Originally Posted by kenchan (Post 1801297)
been wanting to get the big type-r knob for a long time.

wat

onzedge 07-02-2012 07:13 AM

Quote:

Originally Posted by Red__Zed (Post 1801449)
wat

:icon18:

LunaZ 07-02-2012 07:20 AM

Quote:

Originally Posted by kenchan (Post 1801162)

ken-san, did you also do your radio surround yourself?
Looks great.

I'm finally doing something with my Z today...

Pintsize725 07-02-2012 08:47 AM

1 Attachment(s)
Morning guys! Here's my baby waiting to be turned on.

kenchan 07-02-2012 08:48 AM

Quote:

Originally Posted by LunaZ (Post 1801470)
ken-san, did you also do your radio surround yourself?
Looks great.

I'm finally doing something with my Z today...

thanks, luna. Yes I did. :tup: also the sills, window switch, visor, etc.

kenchan 07-02-2012 08:49 AM

Quote:

Originally Posted by Pintsize725 (Post 1801575)
Morning guys! Here's my baby waiting to be turned on.

Looks good, pint. :tup:

onzedge 07-02-2012 08:52 AM

Quote:

Originally Posted by kenchan (Post 1801578)
Looks good, pint. :tup:

:iagree:

Pintsize725 07-02-2012 08:54 AM

Quote:

Originally Posted by kenchan (Post 1801578)
Looks good, pint. :tup:

Quote:

Originally Posted by onzedge (Post 1801584)
:iagree:

Thanks guys. I like how it has the tinted look but it's not tinted. :) Also, need new wheels at some point.


All times are GMT -5. The time now is 03:10 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2