What did you do with your Z today III

Huck

Yeah I know it sounds crazy, but I've been using it for over a year and never had a problem. The blade is a really soft rubber, and I keep it really clean. Not to mention every time before I use it I scrub it down with soap and water. I figure it would be easier to spot some dirt or sand on the blade rather than hidden in a drying cloth.


---
I am here: http://tapatalk.com/map.php?kkvtaq

__________________

Alchemy

Gmorning guys Getting ready to spin some wrenches and get dirty

Anyone who is running sway bars, what settings are you using???

Also, Mr. onzedge & Mr. dAvenue, what settings are you running on your Konis??

All input is appreciated. Have a great weekend guys

__________________
Ryan
314WHP | 260LB-FT | STILLEN | KONI | SWIFT | STOPTECH | Z1 | PROJECT MU | CNT | UPREV | FORGESTAR | BRIDGESTONE | PWJDM | ENEOS | MOTUL

onzedge

Morning, Mr. Alchemy.

So I have the rears exactly in the middle and the fronts 1/4 turn "more tight" than the rears. This was the starting point for me and today I am going to loosen by 1/4 turn front and rear. They are a little stiff with my current settings and I am gong to keep the fronts a bit stiffer tha the reas. I hope this helps.

I can PM my phone number if you want to discuss this -- let me know.

Good luck, man.

__________________

Koni|Swift|Michelin|Motordyne|Berk|RJM Performance|Gates|SPL|Motul|Technafit|Ate Super Blue|Hawk
Tommy Kaira|Momo|Optima|Hella|Hotchkis|Red Line|ZSpeed|Stillen|B&M|H&R

GaleForce

For swaybars it recommended to start with soft front, soft rear. Your suspension setup, alignment, etc. will have an effect on your swaybars, so it's good to expirement with them. I went with soft front, middle rear. It's not bad, but I'm going to try hard front middle rear and see the difference. I haven't noticed any unwarranted over/under steer with my current setup, but figure it's easy enought to change the settings on the swaybar, so I'll experiment.

Have fun turning wrenches today.

__________________

kenchan

Morning all. going to drop off my kid at school and ship out the trims.

Looks like no Z action today.....rain on the way. will take the G instead.

kenchan

Alchemy- GL with the install. my tips: Crack loose the top center nut on shaft before removing from car. Mark orientation of top mount before removal and disassembly.

onzedge

Not too much is happening with the Z today -- minor Koni adjustment and wash. I am taking the Juke in for the post-break-in oil change and inspection.

We are celebrating first son Colin's BD tomorrow and one his buddies is bringing his back-to-the-future mobile and I am getting some photos while it's here. Here is one Colin shot.

__________________

Koni|Swift|Michelin|Motordyne|Berk|RJM Performance|Gates|SPL|Motul|Technafit|Ate Super Blue|Hawk
Tommy Kaira|Momo|Optima|Hella|Hotchkis|Red Line|ZSpeed|Stillen|B&M|H&R

m4a1mustang

Good morning misters! The woman and I are about to head out to go on a cruise with my Z club and taste some nice wines at Bluemont Vineyard. We're taking the S2000 to enjoy the weather.

__________________
- Steve

Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!)
LIKE us on Facebook!

DLSTR

Up early to watch the F1 qualification. Quik Z drive to the VW dealer to get the new front spoiler for the new GTI(update to German spec).

Just finished full detail. Polished and wax'd the new paint yesterday. Did the rest of the car today as well. Nice clean and shiny!

GaleForce

The only thing worse than rain, is having a beautiful day and not being able to drive the Z. Guess what kind of day I have. We can have a pity party, I'll bring the whine, you bring the cheese.

Delorean... So cool! Looking forward to the pictures Mr.onzedge. Sounds like a great weekend.



I'm Mr.Mom today so no Z driving for me. If you don't see any posts from me in 8 hours, send help. My two year old has probably duct taped me to the floor and has overtaken the house.

__________________

kenchan

Wow. Nice pict mr.onzedge! Happy bday to your son.

mr.gale hang in there!

Yah ended up taking the Fit... I cleaned the G last night so was too lazy to redo. The trim has shipped. thanks again for your sales pitch!

GaleForce

Touch your toes and caugh... Did the Doctor linger? Did he have big fingers? Did you give him your number after?

Nap time! Got the house dusted and vacuumed, got my cardio in, lunch made, ate, cleaned up... I'm ahead of schedule and I haven't been taped down to anything yet.

Glad I was able to help with your trim. I was afraid it was going to be your lug nuts all over again. I couldn't let that happen, it was too painful to watch.

__________________

Fire

Gale Gale Gale, what are we going to do with you eh? Sorry for the mixup shado. Props to the Lemers coupe.

__________________
2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

kenchan

was my lug ad that painful?

hey im kinda following a similar schedule today. did laundry and just got done vac'ing the house, folded and put away the laundry. did a few bills and now going to take a quick nap. ...then go pickup my older kid.. hopefully by then the roads are dry and i will pull out my G.

ZMan8

You are doing everything right today sir

__________________
2010 370Z 40 Anniv., 6 MT | Fast Intentions | Swift Springs | SPC | Z1Motorsports | JWM | Redline Oils | 35% Window Tint
2015 Mazda6 | 370ZChicago: Chicago Area Cars & Coffee