Originally Posted by happytheman (Post 1727225)

Youre certifiably crazy don't you know, and I'm on board with that! :tup:

Originally Posted by Pintsize725 (Post 1727228)

I heard boobs. :yum:



I must be the only one actively on here every weekend.

Originally Posted by onzedge (Post 1727233)

Mr. Happy, I have heard that a time or two in my life. Believe it or not. :tiphat:

Originally Posted by happytheman (Post 1727253)

Nope, you're not the only one...but nobody else is posting. :(

Originally Posted by happytheman (Post 1727253)

Nope, you're not the only one...but nobody else is posting. :(




Keeps things interesting! :tup:

Originally Posted by Pintsize725 (Post 1727280)

I've got some questions for you guys.

Can you Koni without Swifting? Would there be any benefit?

What mods make the Z need a tune?

Originally Posted by GaleForce (Post 1727343)

1. Yes you can. The Koni's would probably feel more responsive over the stock struts.

2. generally, intake + HFC + CBE = Uprev (tuning)

Originally Posted by Pintsize725 (Post 1727359)

Thank you sir! So if I only run an intake + CBE, I shouldn't need it?

Originally Posted by Pintsize725 (Post 1727359)

Thank you sir! So if I only run an intake + CBE, I shouldn't need it?

Originally Posted by GaleForce (Post 1727336)

Back in the house for the night. I still have 80% of the car to correct. :icon14:

Here's a teaser, getting work done...

http://i1188.photobucket.com/albums/...s/453338f3.jpg

Originally Posted by happytheman (Post 1727410)

Nah I wouldn't bother with a tune until you have the full fledge of mods. That's when you will reap the most benefit. :)

Originally Posted by Pintsize725 (Post 1727280)

I've got some questions for you guys.

Can you Koni without Swifting? Would there be any benefit?



What mods make the Z need a tune?

Originally Posted by GaleForce (Post 1727336)

Back in the house for the night. I still have 80% of the car to correct. :icon14:

Today I was trying out my new Griots machine and new Meguires Micro Fiber cutting pad and D300. The Griots machine is :yum:. Anyone want a practically new PCXP? Anyhow, I really liked the results I was getting until I had a failure...

Hmm, this looks normal,


Here's a teaser, getting work done...

http://i1188.photobucket.com/albums/...s/453338f3.jpg

Originally Posted by Pintsize725 (Post 1727359)

Thank you sir! So if I only run an intake + CBE, I shouldn't need it?

Originally Posted by Pintsize725 (Post 1727419)

What is the full fledge?

Originally Posted by Pintsize725 (Post 1727419)

What is the full fledge?

Originally Posted by happytheman (Post 1727453)

Wow! Whole lotta nuthin' going on in here tonight. :yawn:

Originally Posted by happytheman (Post 1727465)

Good night all! :hello:

Originally Posted by happytheman (Post 1727412)

Phenomenal garage. I'm officially jelly.

Originally Posted by alcheng (Post 1727421)

1) You should be fine with the Swifts alone, unless you need aggressive handling and bumpy ride, for DD purpose, the Swifts is just fine....

2) If you only have intake and CBE, you don't really need it, the ECU can make adjustment for the intake. :tup:




Mr.GaleForce..... :tup: :tup: :tup:



You are fine, no worry.... :tiphat:

Originally Posted by kenchan (Post 1727552)

Goood morning everyone! :tup:

Pulling out the Z in 25. :p. Hope you are all having a nice Sunday AM.

Originally Posted by GaleForce (Post 1727567)

Good morning Mr.kenchan :hello: have a safe drive :tup:

Originally Posted by kenchan (Post 1727658)

Thank you, mr.gale! I had a great drive. :p even found a few new roads I didn't know in the area. QD'd the Z when I got home. She is sleeping now until next weekend. :D

Originally Posted by GaleForce (Post 1727566)

:tup: :tup: :tup: :tiphat:

Originally Posted by kenchan (Post 1727658)

Thank you, mr.gale! I had a great drive. :p even found a few new roads I didn't know in the area. QD'd the Z when I got home. She is sleeping now until next weekend. :D

Originally Posted by kenchan (Post 1727658)

Thank you, mr.gale! I had a great drive. :p even found a few new roads I didn't know in the area. QD'd the Z when I got home. She is sleeping now until next weekend. :D

Originally Posted by alcheng (Post 1727702)

:tiphat: Mr.GaleForce, such a nice day today, any plan to stretch the leg of your Z???

And now you have such a shiny one, people might think it's a on-road UFO :icon17:

:icon18:

I'm itching to take the Z out with weather so nice. But, it's still in the garage being corrected. I thought I might get the correction finished today, then I decided to take the rear spoiler off so I could remount it using silicone instead of the 3M automotive tape I was using... That "little" job put me back a few hours.

I was just checking in during a lunch break. Have a great day everyone :hello:


Mr.kenchan :tiphat:

Good Morning Everyone!!! :tiphat: :tiphat:

Originally Posted by GaleForce (Post 1727336)

Back in the house for the night. I still have 80% of the car to correct. :icon14:

Today I was trying out my new Griots machine and new Meguires Micro Fiber cutting pad and D300. The Griots machine is :yum:. Anyone want a practically new PCXP? Anyhow, I really liked the results I was getting until I had a failure...

Hmm, this looks normal,

http://i1188.photobucket.com/albums/...s/58bf8a7e.jpg

Hey! Wait a minute!

http://i1188.photobucket.com/albums/...s/d93c0c80.jpg

Something isn't right,

http://i1188.photobucket.com/albums/...s/bebd67f1.jpg

Apparently it's common for these to fail, so I was kind of expecting it, just not so soon. I only used this pad for the hood and roof. :eek: Boo! Good thing they come in packs of two.

Here's a teaser, getting work done...

http://i1188.photobucket.com/albums/...s/453338f3.jpg

Originally Posted by happytheman (Post 1726707)

My Z is out on jacks right now getting the first half of all four wheels repaired. :eek:

Mmmmmmm, servers and workstations... I remember the days and years of working on those. :)

It's all networks for me now. :)

Here she is yesterday, being the designated moving van! I give you......the Cisco 3845 Router

Originally Posted by happytheman (Post 1726801)

Annnnnnnnnddddd done! All four wheels repaired in ~2.5 hrs! Happy couldnt be happier!

Originally Posted by GaleForce (Post 1726709)

Morning Jar :hello: give that 'puter hell!

Originally Posted by Pintsize725 (Post 1726813)

Morning guys. :yawn: Had a very long night and now debating whether or not to actually go in to work. Here are some pics from last night, but I really want to see how it looks in the sun. :excited:

Turns out there is a rather large ding where the paint went down and it now shows like a sore thumb. He offered to fix it but since I might be upgrading to a kit at some point, I said fvck it. You can only notice it from just the right angles. Also, the spot under the fog light was missed and I wasn't able to get a pic of it after it was corrected. I'm happy with it for now. :)

Originally Posted by Nick911sc (Post 1727010)

I'm sitting waiting at a light, car in neutral. Lights about to change, I clutch in, put in first. Car begins to rev to 5k RPMS without touching gas pedal. Stays there revving. I put my car into neutral release the clutch, still revving... clutch in a few times. Still revving, turn off the car, turn back on(while still in traffic), still revving. Finally after I lift my foot off the break pedal it stops revving. Keep in mind it didn't start till the initial clutch in and then didn't stop until my foot was off the break. My foot was no where near the gas and my mats don't even touch the gas pedal. I have to bring it into nissan to get it checked out.

Originally Posted by Nick911sc (Post 1727055)

It's not something that I can recreate as it's happens randomly. It probably won't happen with SRM off(only assuming). but regardless it's not acceptable even if it just happens with SRM on.

Originally Posted by JARblue (Post 1727802)

R2C Intake is INSTALLED. :tup: Gotta take the wife to my sister's bridal shower right now, but pics posted upon return :driving:

Originally Posted by JARblue (Post 1727802)

R2C Intake is INSTALLED. :tup: Gotta take the wife to my sister's bridal shower right now, but pics posted upon return :driving:

Originally Posted by JARblue (Post 1727802)

R2C Intake is INSTALLED. :tup: Gotta take the wife to my sister's bridal shower right now, but pics posted upon return :driving:

Originally Posted by onzedge (Post 1727805)

Nice. :tup: