Those of you who have had Steering Lock Failure

OldGuy · 12-05-2012, 09:27 PM

Quote:

Originally Posted by mayday813

According to the Technical Bulletin issued in April 2012, these are the affected vehicles:

2011 – 2012 Altima Sedan, Coupe & Hybrid (L32, CL32, & L32HV)
2011 – 2012 Maxima (A35)
2011 – 2012 370Z Coupe (Z34) – Roadster not included
2011 – 2012 Murano (Z51) - Cross cabriolet not included
2012 GT-R (R35)

Model Year Applied VINs – on or: After Before

370Z 2011 JN1AZ4EH(*)BM 551888 JN1AZ4EH(*)BM 555448
Coupe 2012 JN1AZ4EH(*)CM 560001 JN1AZ4EH(*)CM 560470

GT-R 2012 JN1AR5EF(*)CM 251149 JN1AR5EF(*)CM 251373

Murano 2WD 2011 JN8AZ1MU(*)BW 060046 JN8AZ1MU(*)BW 070370 2012 JN8AZ1MU(*)CW 100001 JN8AZ1MU(*)CW 101250

Murano 4WD 2011 JN8AZ1MW(*)BW 170078 JN8AZ1MW(*)BW 188648 2012 JN8AZ1MW(*)CW 200001 JN8AZ1MW(*)CW 201900

2011 1N4(*)L2(***)BC 143037 1N4(*)L2(***)BC 185867

Two assembly lines 1N4(*)L2(***)BN 463258 1N4(*)L2(***)BN 517167
1N4(*)L2(***)CC 100000 1N4(*)L2(***)CC 147708
Altima Sedan, Coupe, and Hybrid 2012
Two assembly lines 1N4(*)L2(***)CN 400000 1N4(*)L2(***)CN 452245
Maxima 2011 1N4AA5AP(*)BC 830692 1N4AA5AP(*)BC 869861 2012 1N4AA5AP(*)CC 800000 1N4AA5AP(*)CC 804635

This Technical Bulletin is located at Nissanhelp.com reference NTB12-041

Does this list not include '09 and '10 370 Z coupe's? They aren't listed. I though guys posted as having had failures in '09 and '10 models.

SouthArk370Z · 12-05-2012, 09:51 PM

Quote:

Originally Posted by mayday813

According to the Technical Bulletin issued in April 2012, these are the affected vehicles: ... This Technical Bulletin is located at Nissanhelp.com reference NTB12-041

Nice find. Here's hoping you get an answer to your question at NissanHelp.

mayday813 · 12-06-2012, 07:58 AM

I can't answer why previous models were not listed on the Tech. Bulletin. Perhaps an ECU change or programming modification of some sort in 2011. I guess that's what concerns me is that NTB12-41 appears to correct the issue with a programming change or reflash of the Body Control Module on the later model vehicles.

OldGuy · 12-06-2012, 08:13 AM

Quote:

Originally Posted by mayday813

I can't answer why previous models were not listed on the Tech. Bulletin. Perhaps an ECU change or programming modification of some sort in 2011. I guess that's what concerns me is that NTB12-41 appears to correct the issue with a programming change or reflash of the Body Control Module on the later model vehicles.

Wonder of that's why Nissan people thought I was off base when I complained about this failure as a potential problem for my '09? Possibly, the person at the other end looked at this TSB and felt it had no relevance to my car.

danegrey · 12-06-2012, 08:24 AM

Very interesting, I have the car going in for service on Friday, and will have to ask them about that bulletin, from all the discussion I thought it did not apply to the 2012s

cossie1600 · 12-06-2012, 08:47 AM

Quote:

Originally Posted by OldGuy

Wonder of that's why Nissan people thought I was off base when I complained about this failure as a potential problem for my '09? Possibly, the person at the other end looked at this TSB and felt it had no relevance to my car.

You know why, most 09s are going to be out of warranty......

OldGuy · 12-06-2012, 11:23 AM

Quote:

Originally Posted by cossie1600

You know why, most 09s are going to be out of warranty......

Mine was still under warranty at the time. Nevertheless, for out-of-pocket payment repair situations, the TSB should include all effected models, whether or not still under warranty.

invader19 · 12-06-2012, 01:13 PM

Is there a youtube video with instructions on where/which fuse to pull?

SouthArk370Z · 12-06-2012, 01:35 PM

Quote:

Originally Posted by invader19

Is there a youtube video with instructions on where/which fuse to pull?

As far as I can tell, no.

370z steering lock fuse - YouTube

But it truly is very easy to do if you follow the instructions given in several threads on this site. Heck, even I could figure it out. Took me about 15 minutes and I appear to be one of the slow ones.

pseftis · 12-06-2012, 02:50 PM

Nvmind.. 1st pg.. duhhhhh

Where is the fuse? I'm sure this has been covered but driving and can't look over 18 pages to find it!

SouthArk370Z · 12-06-2012, 02:55 PM

Quote:

Originally Posted by pseftis

Where is the fuse? I'm sure this has been covered but driving and can't look over 18 pages to find it!

It's in the battery compartment, between the battery and fender. You have to remove the plastic "bezel" that holds the battery cover, but it only requires a small-medium flatblade screwdriver. A fuse puller or small pliers comes in handy.

Links to posts about Steering Wheel Lock

invader19 · 12-06-2012, 03:11 PM

Do we have to cut the wire or just pull the fuse is good enough?

LMBmikeZ · 12-06-2012, 03:23 PM

both methods work, you just gotta do one of them

SouthArk370Z · 12-06-2012, 03:28 PM

Pulling the fuse does the same thing* as cutting the wire, so you only need to do one or the other. I recommend removing the fuse - a little more work, but it's easy to put back to normal if the need ever arises.
If you prefer stopping power at the SLU, I suggest using the harness that someone is selling. It's plug-n-play, so you can put everything back to factory condition just by removing the harness. It also provides connectors to add a switch so you can easily control power to the SLU (why anyone would want to do that, I dunno, but it's there).

* Actually it does a little more. Pulling the fuse also kills an internal signal to the IPDM's CPU, but no one has reported any problems other than an occasional short pause between pressing the start button and the engine cranking.

LMBmikeZ · 12-06-2012, 03:41 PM

The pause has also been reported from people who have not even touched the steering lock though.

Just eliminate that stupid lock before it leaves you stranded!

12-06-2012, 02:50 PM	#355 (permalink)
pseftis Base Member Join Date: Apr 2012 Location: Toronto Posts: 156 Drives: 10 Nissan 370z M6 Rep Power: 13	Nvmind.. 1st pg.. duhhhhh Where is the fuse? I'm sure this has been covered but driving and can't look over 18 pages to find it! __________________ Stillen G3/Ark Grip CBE/Berk HFC/Evo-R Side Blades/Shine Spats/Ings+1rep-f.skirt/25mm/20mm/SPC R-Camber/Swift Spec-R/25R Oil Cooler/Custom 180 Headlights/UpRev Last edited by pseftis; 12-06-2012 at 02:53 PM.

12-06-2012, 03:23 PM	#358 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10349	both methods work, you just gotta do one of them __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

12-06-2012, 03:28 PM	#359 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	Pulling the fuse does the same thing* as cutting the wire, so you only need to do one or the other. I recommend removing the fuse - a little more work, but it's easy to put back to normal if the need ever arises. If you prefer stopping power at the SLU, I suggest using the harness that someone is selling. It's plug-n-play, so you can put everything back to factory condition just by removing the harness. It also provides connectors to add a switch so you can easily control power to the SLU (why anyone would want to do that, I dunno, but it's there). * Actually it does a little more. Pulling the fuse also kills an internal signal to the IPDM's CPU, but no one has reported any problems other than an occasional short pause between pressing the start button and the engine cranking. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

12-06-2012, 03:41 PM	#360 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10349	The pause has also been reported from people who have not even touched the steering lock though. Just eliminate that stupid lock before it leaves you stranded! __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Steering lock failure	Terrace	Canada	52	06-16-2013 09:32 PM
[WTB] steering lock assembly	bfowlzr33	Parts for sale (Private Classifieds)	7	11-19-2012 01:52 PM
Steering Lock Elimination	Vince	Exterior & Interior	38	05-18-2012 10:43 AM
Steering lock repair	fritz	DIY Section (Do-It-Yourself)	38	02-22-2012 09:30 PM
steering wheel lock	rosankyslim	Exterior & Interior	4	01-19-2012 03:43 PM

12-06-2012, 07:58 AM	#348 (permalink)
mayday813 Base Member Join Date: Dec 2010 Location: Iowa Posts: 143 Drives: 11 370Z spt tour 6mt Rep Power: 14	I can't answer why previous models were not listed on the Tech. Bulletin. Perhaps an ECU change or programming modification of some sort in 2011. I guess that's what concerns me is that NTB12-41 appears to correct the issue with a programming change or reflash of the Body Control Module on the later model vehicles.

12-06-2012, 08:24 AM	#350 (permalink)
danegrey A True Z Fanatic Join Date: Oct 2011 Location: Knoxville Age: 71 Posts: 3,080 Drives: 12 370Z BK Cherry M6 Rep Power: 558939	Very interesting, I have the car going in for service on Friday, and will have to ask them about that bulletin, from all the discussion I thought it did not apply to the 2012s

12-06-2012, 01:13 PM	#353 (permalink)
invader19 Base Member Join Date: Aug 2012 Location: Vancouver Posts: 93 Drives: 09 370z 6 speed Rep Power: 12	Is there a youtube video with instructions on where/which fuse to pull?

12-06-2012, 03:11 PM	#357 (permalink)
invader19 Base Member Join Date: Aug 2012 Location: Vancouver Posts: 93 Drives: 09 370z 6 speed Rep Power: 12	Do we have to cut the wire or just pull the fuse is good enough?