Those of you who have had Steering Lock Failure

USINC97 · 10-10-2012, 04:27 AM

5K on ours. Normally just weekend driving. Going to buy the by-pass kit unless there is a general recall on the steering lock.

Thechidz · 10-10-2012, 05:47 AM

Quote:

Originally Posted by USINC97

5K on ours. Normally just weekend driving. Going to buy the by-pass kit unless there is a general recall on the steering lock.

I think if it fails the bypass wont help you? Someone correct me if Im wrong?

GaleForce · 10-10-2012, 06:01 AM

Quote:

Originally Posted by Thechidz

I think if it fails the bypass wont help you? Someone correct me if Im wrong?

You need to install the bypass before the steering lock fails.

fritz · 10-10-2012, 06:42 AM

Refer later to "steering lock cut one wire: switch optional" thread

If, by any means, you can get the car started...see Kenchan's advice how to which includes ...and/or:
Shake the steering while attempting to start
Turn on/off other elec circuits
Operate windows or lights or both,
Tap gently (but mechanically) the lock while doing the above
Add a battery as if you are going to jump start
Do anything to agitate that lock to "do it" one more time and even,
Dis the battery for a few minutes...then re-try the above (Tho you have now lost your window and radio station settings..no big deal).

IF you have got the car to start...do NOT turn it off....If you do then do NOT
get out of the car with the ignition on lock.

Now snip that brown wire: as shown on the thread at the start above.
Problem solved for no cost, but no steering lock.

IF a nogo:
IF you are 100% sure it is the steering lock, remove it (kenchan again who rightly says pliers undo the two thief -proof bolts).

Then admit it is useless and e-mail me for instructions to dismantle it (using your own e-mail address and name). ...

Then there's an excellent chance of fixing it internally but never to be used again as a lock ...... or even fixed 100%, if lucky.

If the lock itself is mechanically dud, the electronics probably are not ..... again I can help.

In all cases you need a few good tools.

Fritz

SalA · 10-10-2012, 10:04 AM

Why wait for a disaster...Just ordered the bypass harness!

Dwight Frye · 10-10-2012, 06:13 PM

I wouldn't even trust one of the later Rev. C marked locks. At minimum, everyone should remove the fuse as described in a very helpful thread. I didn't like that idea and opted for the harness, installation took just a few minutes and it's also well illustrated in a thread. My '09 only has 27K miles but the warranty expired last month. I would be seriously PISSED if stranded and had to pay $850-$1200 to replace a $500 part (which is ridiculous in itself) plus towing charges. Chances are very good that the part WILL fail, the more lock/unlock cycles it goes through the higher the chances.
Nissan is not going to do a TSB or recall, pull the fuse or spend $50 for the harness and put your mind at ease.

onzedge · 10-11-2012, 03:15 PM

Quote:

Originally Posted by Dwight Frye

I wouldn't even trust one of the later Rev. C marked locks. At minimum, everyone should remove the fuse as described in a very helpful thread. I didn't like that idea and opted for the harness, installation took just a few minutes and it's also well illustrated in a thread. My '09 only has 27K miles but the warranty expired last month. I would be seriously PISSED if stranded and had to pay $850-$1200 to replace a $500 part (which is ridiculous in itself) plus towing charges. Chances are very good that the part WILL fail, the more lock/unlock cycles it goes through the higher the chances.
Nissan is not going to do a TSB or recall, pull the fuse or spend $50 for the harness and put your mind at ease.

My lock failed earlier this year -- it was a Rev C.

obito · 10-10-2012, 06:54 PM

Quote:

Originally Posted by SalA

Why wait for a disaster...Just ordered the bypass harness!

what is the bypass harness that u are talking about? are u talking about this one ?Steering Lock Harness - Car Kit Company because If u are talking about it, Im going to by it too then. I dont want the the steering lock failure happen to my car

MelloYello · 10-10-2012, 07:58 PM

Just got the bad news today. I have a 2009 with about 40k miles and the unit is a rev B. I read the DIY thread, but didn't see the photos and am wondering if I should try to tackle this myself as the dealer wants $1,245. Anyone out there done the DIY? Was it really that easy and only 15 minutes? Any pics or advice would be very much appreciated.

10-10-2012, 06:42 AM	#4 (permalink)
fritz Base Member Join Date: Aug 2010 Location: Andorre Posts: 90 Drives: 2010 370Z M6 Rep Power: 18	Refer later to "steering lock cut one wire: switch optional" thread If, by any means, you can get the car started...see Kenchan's advice how to which includes ...and/or: Shake the steering while attempting to start Turn on/off other elec circuits Operate windows or lights or both, Tap gently (but mechanically) the lock while doing the above Add a battery as if you are going to jump start Do anything to agitate that lock to "do it" one more time and even, Dis the battery for a few minutes...then re-try the above (Tho you have now lost your window and radio station settings..no big deal). IF you have got the car to start...do NOT turn it off....If you do then do NOT get out of the car with the ignition on lock. Now snip that brown wire: as shown on the thread at the start above. Problem solved for no cost, but no steering lock. IF a nogo: IF you are 100% sure it is the steering lock, remove it (kenchan again who rightly says pliers undo the two thief -proof bolts). Then admit it is useless and e-mail me for instructions to dismantle it (using your own e-mail address and name). ... Then there's an excellent chance of fixing it internally but never to be used again as a lock ...... or even fixed 100%, if lucky. If the lock itself is mechanically dud, the electronics probably are not ..... again I can help. In all cases you need a few good tools. Fritz Mt Tam I am and GaleForce like this.

10-10-2012, 10:04 AM	#5 (permalink)
SalA Base Member Join Date: Mar 2010 Location: Milton, GA Posts: 247 Drives: 17 Nissan GT-R Rep Power: 17	Why wait for a disaster...Just ordered the bypass harness! __________________ 2017 Pearl White GT-R Premium \|Full Bolt-On E85 From Speed by Design\|

10-10-2012, 06:13 PM	#6 (permalink)
Dwight Frye Enthusiast Member Join Date: Jul 2009 Location: Occupied California Posts: 423 Drives: '09 Tour/Sport/6MT Rep Power: 18	I wouldn't even trust one of the later Rev. C marked locks. At minimum, everyone should remove the fuse as described in a very helpful thread. I didn't like that idea and opted for the harness, installation took just a few minutes and it's also well illustrated in a thread. My '09 only has 27K miles but the warranty expired last month. I would be seriously PISSED if stranded and had to pay $850-$1200 to replace a $500 part (which is ridiculous in itself) plus towing charges. Chances are very good that the part WILL fail, the more lock/unlock cycles it goes through the higher the chances. Nissan is not going to do a TSB or recall, pull the fuse or spend $50 for the harness and put your mind at ease. onzedge, Mt Tam I am and GaleForce like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Steering lock failure	Terrace	Canada	52	06-16-2013 09:32 PM
[WTB] steering lock assembly	bfowlzr33	Parts for sale (Private Classifieds)	7	11-19-2012 01:52 PM
Steering Lock Elimination	Vince	Exterior & Interior	38	05-18-2012 10:43 AM
Steering lock repair	fritz	DIY Section (Do-It-Yourself)	38	02-22-2012 09:30 PM
steering wheel lock	rosankyslim	Exterior & Interior	4	01-19-2012 03:43 PM

10-10-2012, 04:27 AM	#1 (permalink)
USINC97 Base Member Join Date: Mar 2011 Location: Wisconsin Posts: 104 Drives: 09 370Z 6MT/09 Cube Rep Power: 16	5K on ours. Normally just weekend driving. Going to buy the by-pass kit unless there is a general recall on the steering lock.

10-10-2012, 07:58 PM	#9 (permalink)
MelloYello Base Member Join Date: Jul 2010 Location: St. Louis, MO Posts: 23 Drives: 09 370Z CY M6 Rep Power: 17	Just got the bad news today. I have a 2009 with about 40k miles and the unit is a rev B. I read the DIY thread, but didn't see the photos and am wondering if I should try to tackle this myself as the dealer wants $1,245. Anyone out there done the DIY? Was it really that easy and only 15 minutes? Any pics or advice would be very much appreciated.