Those of you who have had Steering Lock Failure

fncrow · 03-28-2012, 09:46 AM

Quote:

Originally Posted by Thechidz

how much does the dent removal cost? I have an annoying little one in my hood

I just had one removed from my hood from a plastic beach chair that fell out out of the rafters in the garage onto my hood. Took it to a Nissan dealership and cost $140 to get fixed.

tonythetiger · 03-28-2012, 10:43 AM

so this steering lock failure is causing our cars not to start due to faulty part? sorry have not read anything about this. should i go ahead and replace mine in case rite now in case my car doesnt start?

GaleForce · 03-28-2012, 12:51 PM

1, read Kenchan's DIY.

2, look under you dash to find out what revision you have.

3, depends on #2. If you're out of warranty and you have revision C or lower, then sure, go ahead and swap it out for the Rev D, see #1 for the procedure.

kenchan · 03-28-2012, 12:52 PM

Quote:

Originally Posted by GaleForce

1, read Kenchan's DIY.

2, look under you dash to find out what revision you have.

3, depends on #2. If you're out of warranty and you have revision C or lower, then sure, go ahead and swap it out for the Rev D, see #1 for the procedure.

mr.gale- you are now officially TS16949 Certified.

onzedge · 03-28-2012, 12:54 PM

Quote:

Originally Posted by kenchan

mr.gale- you are now officially TS16949 Certified.

GaleForce · 03-28-2012, 12:59 PM

Quote:

Originally Posted by kenchan

mr.gale- you are now officially TS16949 Certified.

Sweet! I've collected them all now! Should make me very employable!

kenchan · 03-28-2012, 01:01 PM

Quote:

Originally Posted by GaleForce

Sweet! I've collected them all now! Should make me very employable!

sonic370 · 03-28-2012, 08:49 PM

09 35,000 still going strong... as i knock on wood.............

i'm going to see my dealer in a week or so for oil change gonna ask about it..

USMCASA · 03-29-2012, 08:47 AM

09 w/86500 on the odo no issues. guess i should peel off the steering column and see which one i have.

***knocked on wood too***

Nick911sc · 03-29-2012, 08:49 AM

Quote:

Originally Posted by USMCASA

09 w/86500 on the odo no issues. guess i should peel off the steering column and see which one i have.

***knocked on wood too***

No need to peel. Stick your head in the footwell and look up, it's visible without removing anything.

onzedge · 03-29-2012, 08:50 AM

Quote:

Originally Posted by USMCASA

09 w/86500 on the odo no issues. guess i should peel off the steering column and see which one i have.

***knocked on wood too***

Dang, you have quite a few miles logged on your Z. It makes me proud.

Vaughanabe13 · 03-29-2012, 09:02 AM

Quote:

Originally Posted by USMCASA

09 w/86500 on the odo no issues. guess i should peel off the steering column and see which one i have.

***knocked on wood too***

Way to represent the chicane yellows! Maybe our color is immune!

rhd · 03-29-2012, 07:51 PM

I am hoping someone smart will crack one of these open and figure out how to fix these things with a soldering iron and/or an ISO programmer.

Where are you oh electronics guru wizard of the Z inner workings world?

Help us mister wizard!

zguynate · 03-30-2012, 09:43 AM

Quote:

Originally Posted by rhd

I am hoping someone smart will crack one of these open and figure out how to fix these things with a soldering iron and/or an ISO programmer.

Where are you oh electronics guru wizard of the Z inner workings world?

Help us mister wizard!

This!!

kenchan · 03-30-2012, 11:30 AM

Quote:

Originally Posted by rhd

I am hoping someone smart will crack one of these open and figure out how to fix these things with a soldering iron and/or an ISO programmer.

Where are you oh electronics guru wizard of the Z inner workings world?

Help us mister wizard!

KORRUPT and AWX already did. check out the DIY with updates.

03-28-2012, 10:43 AM	#92 (permalink)
tonythetiger A True Z Fanatic Join Date: Oct 2010 Location: SA, TX Posts: 1,035 Drives: 10 Nissan 370z PG MT Rep Power: 192	so this steering lock failure is causing our cars not to start due to faulty part? sorry have not read anything about this. should i go ahead and replace mine in case rite now in case my car doesnt start? __________________ KWV3/Eibach/StillenG3/FI CBE+LTH+34Row/Uprev/SPL/SouthBendSS/QuaifeLSD/4.08/TommyKaira/Status/VolkZE40/AP Radical BBK/Seibon/Amuse/VIS/Sparco/WorksBellGTC/RJM/Nismo

03-28-2012, 12:51 PM	#93 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51864	1, read Kenchan's DIY. 2, look under you dash to find out what revision you have. 3, depends on #2. If you're out of warranty and you have revision C or lower, then sure, go ahead and swap it out for the Rev D, see #1 for the procedure. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Steering lock failure	Terrace	Canada	52	06-16-2013 09:32 PM
[WTB] steering lock assembly	bfowlzr33	Parts for sale (Private Classifieds)	7	11-19-2012 01:52 PM
Steering Lock Elimination	Vince	Exterior & Interior	38	05-18-2012 10:43 AM
Steering lock repair	fritz	DIY Section (Do-It-Yourself)	38	02-22-2012 09:30 PM
steering wheel lock	rosankyslim	Exterior & Interior	4	01-19-2012 03:43 PM

03-28-2012, 08:49 PM	#98 (permalink)
sonic370 A True Z Fanatic Join Date: May 2010 Location: Orange Texas Posts: 1,574 Drives: 09 370Z Sports PGK Rep Power: 18	09 35,000 still going strong... as i knock on wood............. i'm going to see my dealer in a week or so for oil change gonna ask about it..

03-29-2012, 08:47 AM	#99 (permalink)
USMCASA A True Z Fanatic Join Date: Nov 2009 Location: NC Posts: 1,152 Drives: 09 370z CY M6 Rep Power: 17	09 w/86500 on the odo no issues. guess i should peel off the steering column and see which one i have. *knocked on wood too*

03-29-2012, 07:51 PM	#103 (permalink)
rhd Enthusiast Member Join Date: Feb 2012 Location: In the shop Posts: 281 Drives: Women Crazy Rep Power: 13	I am hoping someone smart will crack one of these open and figure out how to fix these things with a soldering iron and/or an ISO programmer. Where are you oh electronics guru wizard of the Z inner workings world? Help us mister wizard!