Cold Air Intake System

sfearl1 · 01-22-2012, 04:51 PM

Edit, I take that back... You started yours first

Here's the other thread...

http://www.the370z.com/nissan-370z-g...-hp-gains.html

Maybe mods can merge these threads?

Guard Dad · 01-23-2012, 11:00 AM

Quote:

Originally Posted by RoshDawg

Bought some Gen 3's but have yet to install them. Is the installation really that hard that everyone is using professional mechanics?

Not a deal if you know your way around a garage. It's about a 2 on a 1-10 scale with 10 being most difficult. You will get a cleaner install if you use a 2" sanding drum on a power drill to enlarge the holes in the radiator support rather than just hacking away at it. Also, be sure to install (per the Stillen directions) the rubber/vinyl shielding on the AC piping.

The pipes scratch easily so it's a good idea to cover the pipes (except where they go into the connectors) in delicate surface (for easy removal) blue masking tape to prevent scratches. Keep polishes, solvents and cleaners off of the "Stillen" stickers or you could dull/smear them.

RoshDawg · 01-23-2012, 09:03 PM

Sweet thanks Guard Dad!

somatic · 01-23-2012, 09:16 PM

ibtl

40TH4ME · 01-25-2012, 08:16 AM

Looks like you've got all of your answers here, however my two cents. I installed my K&N intake system a few months ago. Install is no problem with basic tools. Just take your time and read ahead in the install manual. Sound is so good that I may not even need a CBE system. GOOD LUCK!!!

UNKNOWN_370 · 01-25-2012, 09:07 AM

Its like repetition is a never ending story von the forum.

http://www.the370z.com/nissan-370z-g...-hp-gains.html

mrlou2 · 03-16-2012, 08:49 PM

Thanks to all for your replies. Put in the TAKEDA CAI and love the HP and Sound!

UNKNOWN_370 · 03-16-2012, 11:02 PM

Quote:

Originally Posted by brucelidat

If you're just going to do the CAI, then you'll get good gains. But keep in mind that if you do more than 1 breathing mod, the first one will net the most gains while the subsequent ones will have very diminished gains. SO if you know for sure you plan to do a CBE or something, then the CAI may not be worth it for the gains. That being said, there will still be gains, so whether or not it is worth it totally up to you. Read up on it, there are tons of threads on CAIs, CBE, HFCs and their combinations. I personally didn't think the cost was worth it for the CAI after having the CBE and HFCs put on so I just dropped some K&Ns in. Your opinion may be different.

Yezzzirr. CBE and test pipe or hfc first. Post mafs and filter will finish it off lovely with a savongs of up to $300. Which you can put toward some swifts.

Nismodean · 03-17-2012, 04:06 AM

Quote:

Originally Posted by Chan Chee Hoe

I used Drop in HKS,better low end torque than K&N.

I use drop in turbonetics, better torque and HP than either of those...

XwChriswX · 03-17-2012, 04:10 AM

Quote:

Originally Posted by Nismodean

I use drop in turbonetics, better torque and HP than either of those...

of dyno print-out?

01-22-2012, 04:51 PM	#16 (permalink)
sfearl1 A True Z Fanatic Join Date: Oct 2011 Location: St. Louis Posts: 2,300 Drives: 2013 FBO E85 GTR Rep Power: 17	Edit, I take that back... You started yours first Here's the other thread... http://www.the370z.com/nissan-370z-g...-hp-gains.html Maybe mods can merge these threads? __________________ Scott

01-23-2012, 09:03 PM	#18 (permalink)
RoshDawg Track Member Join Date: May 2011 Location: NM / CA Posts: 981 Drives: '13 911 C2S Rep Power: 15	Sweet thanks Guard Dad! __________________ \| EVO X MR \| '11 WRX STI \| 370Z SPRT \| 911 (991) C2S \|

01-23-2012, 09:16 PM	#19 (permalink)
somatic A True Z Fanatic Join Date: Aug 2011 Location: Grapevine, TX Posts: 1,767 Drives: 2013 GS350 Rep Power: 16	ibtl __________________ Passport 9500i HW\|Short Tail Exhaust\|Evo-r CF Fangs & Fog\|Blacked Out Roof\|Status Elite Intake 19/22\|AUTO Shift Boot DIY\|GTR Button\|Rear Limo Tint\|S2carbonworks hood dampeners\|Falken Rt-7m 20"s w/Jade Project Mu Tuner Lugs\|P:JDM Oil Cap\|Tow Hook\|SOLD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nissan 370z Injen Cold Air intake system super low price	ERZperformance	Exhaust/Intake	80	04-26-2012 04:16 PM
Takeda Cold Air Intake System, 09+ 370Z, lowest price fast shipping.	Will@Logic	Exhaust/Intake	18	12-06-2011 03:10 PM
[FOR SALE] 2011 NISSAN 370Z 3.7L V6 F/I - All - AEM Cold Air Intake System	bbsteve	Parts for sale (Private Classifieds)	15	10-15-2011 10:34 PM
AEM 370z Cold Air Intake System with ETI	370zNismo66	Parts for sale (Private Classifieds)	3	02-11-2011 10:54 PM

01-25-2012, 08:16 AM	#20 (permalink)
40TH4ME Base Member Join Date: Jun 2010 Location: West Texas Lubbock Posts: 68 Drives: 2011 PPW Rep Power: 14	Looks like you've got all of your answers here, however my two cents. I installed my K&N intake system a few months ago. Install is no problem with basic tools. Just take your time and read ahead in the install manual. Sound is so good that I may not even need a CBE system. GOOD LUCK!!!

01-25-2012, 09:07 AM	#21 (permalink)
UNKNOWN_370 A True Z Fanatic Join Date: Jul 2009 Location: ny'r livn in tx Posts: 8,687 Drives: well over 130m.p.h. Rep Power: 14857	Its like repetition is a never ending story von the forum. http://www.the370z.com/nissan-370z-g...-hp-gains.html

03-16-2012, 08:49 PM	#22 (permalink)
mrlou2 Base Member Join Date: Nov 2011 Location: Randallstown, MD Posts: 12 Drives: 2012 370Z Roadster Rep Power: 13	Thanks to all for your replies. Put in the TAKEDA CAI and love the HP and Sound!