A quick and easy mod is to paint the oil dipstick. Couldn't stand the yellow sticking out in the engine bay. Best part was it was free I had some black spray paint laying around(Black Gloss) and it turned out well. Also I took the warning off the radiator cap.

I'm selling one on the parts area for $50 shipped

$50-100 for a couple pieces of plastic really turns me off.

I can think of 12 things better then spending money for an emblem haha.

I like it! :tup: Good idea. I was just staring at the dipstick the other day going:
http://images.zaazu.com/img/scratch-...0416-large.gif

12? That's a very specific number, and it makes me go:

http://images.zaazu.com/img/scratch-...0416-large.gif

In case anyone was wondering, a tow hook WILL fit the Stillen front Fascia, but it is tight. The air intake for the Gen 3's gets in the way a bit, but it went on. I bought it from here: PURPLE Front Screw on Aluminum Tow Hook for 05 06 07 08 Nissan 350Z 22MM : Amazon.com : Automotive

http://www.the370z.com/attachment.ph...1&d=1368561074

Nice! I still need to get mine from Osiris, he's giving me his old one. I'll powder cost it white and mount it :)


Sent from my iPizzle using magic and new-fangled science stuff

i recently swapped to GTR maplight lenses. kinda cool. $30 or something.

Nismo GT2 Brake Duct Kit w/ NACA Ducts 350Z - 99996-Z3344 - Nismo

I was googling brake ducts and came across this. It's made for the 350Z, but it'd probably fit outside the bumper cutout area and it's only $100. Cheaper than the stillen kit and of course the Nismo RC ducts.

Linky?

This is a cool hood/ hatch emblem.

Nissan 370Z Z Badge Emblem Fairlady Z34 370 350Z nismo Bodykit Front Rear | eBay

I ordered this from that seller awhile ago and it's a nice piece. Satin aluminum finish and fit perfectly.

$2 Radar Detector mount :tup:

Bringing this back :)

Anyone tried one of these kits? One of the guys in the local club got one but I never heard how everything worked out. It's a lot of dress up for $95.

http://www.zspec.us/Z34_collection.htm

Cool looking but I've not talked to anyone who's done it.

Any new cheap mods lately. keep it going.

If you have harnesses... get some elastic shoelaces and tie the latches back a-la euro endurance racing. Will be posting a full thread with pics sometime.

Hood vents
 

http://www.the370z.com/members/mozen...nal-instal.jpg

Under 200 for the vents, materials and bay time.

How complicated was the install? Did you DIY?

Not complicated, just measure well, then trace out the holes with a piece if paper and cut. Seal them in with silicone or something similar.

Zdayz 2014!!

:iagree: The measuring is the trick of it, because you have 1 chance to get it right & 2 changes to muck it up ;)

Not sure if I want to risk it and botch the not too old paint job on my hood.

Loving this thread! Keep 'em coming!


Sent from my iPad using Tapatalk

Botching the paint is not a problem as the flange on the vents will cover any edging trouble like chips or jagged cuts (within reason of course). Getting the vents aligned properly depending on how you lay them out can be a time consuming head-ache & be a real problem if you do not lay them out correctly & cut it, because if they are off, you & everyone else will know it. ;)

http://www.the370z.com/members/felix...130703-909.jpghttp://www.the370z.com/members/felix...130654-088.jpg

For those with protruding skirts. These kept rocks and debris from shredding it. I'm going to try a spray on truck bed liner on the metal piece when I get a chance. Total cost, under $10.

[IMG]https://farm3.staticflickr.com/2841/...9c43378854.jpgDSCN5839 by axmea?, on Flickr[/IMG]

that's cool. i use clearbra for those painted areas. :)

- Tailights red reverse/turn signal vinyl overlay
- Headlights gloss black amber reflector vinly overlay

http://s28.postimg.org/wwjts7gfg/image.jpg
http://s28.postimg.org/dc5apffu5/689261528_o.jpg

I've got the same issue on my black Evo-R blades. Every wash, I take a sponge and a bottle of Back-To-Black and do a quick swipe. Looks perfect from a few feet away.

http://i100.photobucket.com/albums/m...ps621a7040.jpg

XD I custom made and ordered this vinyl online.

Mine :)?

B@t

Some have already seen this in my album.
For those with spanner wrenches, I molded them into the foam blocks.
Here's how: Spanner Wrench Mod


http://farm3.staticflickr.com/2872/1...6c5cfa93_z.jpg

Nice :tup:

Can you post a pic of your red overlay for the tails? I was also considering the red but cannot find any pictures of it :tup:

Has anyone bought this from here? Looks slick. I want.

where can I get some vinyl stickers like this?

http://tapatalk.imageshack.com/v2/15...212bef4a24.jpg


Not sure if this counts but it was cheap


Sent from my iPhone using Tapatalk

I did. If you do, take your time and have a buddy help you. GL

Would like one as well.

Did this as well :tup:

http://pages.ebay.com/link/?nav=item...d=221740235661

Is this legit?