2012 Model Will Have OIl Cooler

cossie1600 · 10-12-2011, 09:26 PM

Quote:

Originally Posted by b1adesofcha0s

So would I have any issues with an aftermarket oil cooler and driving in the snow/very cold temps?

It's not ideal to run around with 140F oil, but what are you going to do when it is 20F out. I used blue painters tape to tape up the oil cooler last year because i got too lazy to do anything on my 2 miles commute....

b1adesofcha0s · 10-12-2011, 09:33 PM

Quote:

Originally Posted by cossie1600

It's not ideal to run around with 140F oil, but what are you going to do when it is 20F out. I used blue painters tape to tape up the oil cooler last year because i got too lazy to do anything on my 2 miles commute....

Not sure. I don't have an oil cooler yet, but was planning on getting one eventually. Problem is, I DD my Z including in the winter even if it snows.

esfourteen · 10-12-2011, 09:38 PM

Quote:

Originally Posted by b1adesofcha0s

Not sure. I don't have an oil cooler yet, but was planning on getting one eventually. Problem is, I DD my Z including in the winter even if it snows.

Just run a block off plate once it starts getting cold out, I'll be putting one on in november.

b1adesofcha0s · 10-12-2011, 09:40 PM

Quote:

Originally Posted by esfourteen

Just run a block off plate once it starts getting cold out, I'll be putting one on in november.

Good to know

ImportConvert · 10-12-2011, 09:39 PM

What makes me really laugh is that I said this setup would be ideal and then everyone whined and bitched about how much it would cost to do a setup like GM did. Now Nissan did it and you are all whining some more, lol.

here many of you are in this thread here telling me crap about "This is Nissan and not GM" and other such mess when I tried to talk some sense into you.
oil cooler

Well...in the words of Cartman, suck my bawwwlllss!!!!!
(Presuming of course that Nissan doesn't use a plate setup. In which case you have already shown that you think it is CHEAPER and VERY PLAUSIBLE for them to use the setup we are currently discussing. You just sing a different tune because it's YOUR idea now.)

Red__Zed · 10-12-2011, 09:44 PM

Quote:

Originally Posted by ImportConvert

What makes me really laugh is that I said this setup would be ideal and then everyone whined and bitched about how much it would cost to do a setup like GM did. Now Nissan did it and you are all whining some more, lol.

here many of you are in this thread here telling me crap about "This is Nissan and not GM" and other such mess when I tried to talk some sense into you.
oil cooler

Well...in the words of Cartman, suck my bawwwlllss!!!!!

wat?

ImportConvert · 10-12-2011, 09:45 PM

Quote:

Originally Posted by Red__Zed

wat?

Go read the thread. Everyone in there was whining and bitching that I would bring up GM's solution to the problem. Now that they are saying Nissan has done it, it's a "cheap option", etc. etc. etc. instead of their party line of "It's too expensive, Nissan isn't GM, blah blah blah".

Amazing how everyone changes their tune when they think it's "their" idea. Go read the thread and then come back here and see what the same people are saying.

Red__Zed · 10-12-2011, 09:45 PM

Quote:

Originally Posted by ImportConvert

Go read the thread. Everyone in there was whining and bitching that I would bring up GM's solution to the problem. Now that they are saying Nissan has done it, it's a "cheap option", etc. etc. etc. instead of their party line of "It's too expensive, Nissan isn't GM, blah blah blah"

esfourteen · 10-12-2011, 09:46 PM

Quote:

Originally Posted by ImportConvert

What makes me really laugh is that I said this setup would be ideal and then everyone whined and bitched about how much it would cost to do a setup like GM did. Now Nissan did it and you are all whining some more, lol.

I just don't get it... I mean I know you like trolling but, do you really have so much free time you hang around forums for a car you only considered purchasing?

10-12-2011, 09:39 PM	#5 (permalink)
ImportConvert A True Z Fanatic Join Date: Jun 2010 Location: SWMO Posts: 4,454 Drives: 2019 CX5 GT Reserve Rep Power: 7626	What makes me really laugh is that I said this setup would be ideal and then everyone whined and bitched about how much it would cost to do a setup like GM did. Now Nissan did it and you are all whining some more, lol. here many of you are in this thread here telling me crap about "This is Nissan and not GM" and other such mess when I tried to talk some sense into you. oil cooler Well...in the words of Cartman, suck my bawwwlllss!!!!! (Presuming of course that Nissan doesn't use a plate setup. In which case you have already shown that you think it is CHEAPER and VERY PLAUSIBLE for them to use the setup we are currently discussing. You just sing a different tune because it's YOUR idea now.) Last edited by ImportConvert; 10-12-2011 at 09:44 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 02:27 PM
Has anyone actually gotten an allocation for a 2012 model?	Nixlimited	Nissan 370Z Pricing / Ordering Discussions	4	08-31-2011 06:52 PM
Oil Cooler.....Trans Cooler...	kannibul	Engine & Drivetrain	6	12-31-2009 06:32 PM
Buying 2009 Model now VS. Wait till Next 2010 Model arrives	khsysh	Nissan 370Z General Discussions	9	03-06-2009 03:38 AM