Oil Cooler Install Thread

shumby · 05-15-2009, 12:19 PM

sorry did not mean to say the fitting were cheep. I work on an offshore oilrig and deal with hydrolic fitting all the time. Mind you I deal with 3500 PSI Working pressure. You are right the fitting are good to 200+psi. I just have found that crimped fitting are always better and give you less to worry about. The commet I made about being cheep was not directed at the fitting themselves but at people saying not to buy a chhep ol cooler, which this is not. But then being happy with socketless connectors when crimped on ends are better if not a bit of overkill though. Word of advice check those JIC fitting everytime you change your oil as they do like to slowly back off from vibration. But for the love of god dont over torque them or you will be asking for a leek.

05-15-2009, 12:19 PM	#36 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 46 Posts: 6,288 Drives: your sister Rep Power: 238	sorry did not mean to say the fitting were cheep. I work on an offshore oilrig and deal with hydrolic fitting all the time. Mind you I deal with 3500 PSI Working pressure. You are right the fitting are good to 200+psi. I just have found that crimped fitting are always better and give you less to worry about. The commet I made about being cheep was not directed at the fitting themselves but at people saying not to buy a chhep ol cooler, which this is not. But then being happy with socketless connectors when crimped on ends are better if not a bit of overkill though. Word of advice check those JIC fitting everytime you change your oil as they do like to slowly back off from vibration. But for the love of god dont over torque them or you will be asking for a leek. __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oil Cooler install solves the problem?	spearfish25	Nissan 370Z General Discussions	26	01-03-2012 06:49 PM
Diff Cooler, how do I know I need it?	spearfish25	Engine & Drivetrain	13	10-30-2009 11:19 PM
Oil Cooler Install and First Service Done by Edmunds.com 04.19.09	AK370Z	Nissan 370Z General Discussions	24	04-21-2009 04:32 PM
Oil cooler	Zeto	STILLEN	6	04-20-2009 07:08 PM
Is there or is there not a problem with the oil cooler?	sluggoZ	Nissan 370Z General Discussions	26	03-18-2009 12:28 PM