I bought 10 of These

Sibze · 05-30-2010, 11:04 PM

Zigen5 · 05-30-2010, 11:09 PM

Just installed 2 of them...... Its night and day!!!!!

NOT!!!!!

Matt · 05-30-2010, 11:35 PM

Quote:

The Vortex created inside of the combustion chamber diffuses and atomizes the air/fuel mixture for more complete combustion. More complete combustion makes your engine more efficient.

Revolutionizing technology, if I must say.

Zsteve · 05-30-2010, 11:46 PM

Quote:

Originally Posted by Matt

Revolutionizing technology, if I must say.

Matt you working days or nights right now? Im back at home for some training.

Brazilbro · 05-30-2010, 11:56 PM

Quote:

Originally Posted by TreeSemdyZee

Believe it or not, I do have a Slap Chop. And it actually works.

I Bet everyone loves you nuts

Jordo! · 05-31-2010, 12:07 AM

Quote:

Originally Posted by Sibze

Herpes and genital warts notwithstanding, that's a pretty hot hooker.

KillerBee370 · 05-31-2010, 01:47 AM

Turbonator with a different name. I can't believe people actually purchase this crap.

Scott @ RA · 05-31-2010, 01:55 AM

Hey Jpit, if you put all 10 of them on you will in theory gain up to 350 more horsepower and 500 more Ft/lbs of torque...... so be careful and start out slow, maybe only put one or two on at a time so you can get used to the power.....

05-31-2010, 02:09 AM

Wow this joke is over 5yrs old. When will people stop.

gumpy · 05-31-2010, 02:18 AM

There is some sense to that thing...

Nissan were hoping to find a solution to the complexities of direct injection by some how creating a swirl in the cylinder when the fuel is added...

this might add swirl... i'm skeptical but there is some logic behind it...

1slow370 · 05-31-2010, 02:59 AM

nope no swirl. honda had swirl figured out years ago and the only real effective way to do it without to much turbulence is to have either one intake valve open farther than the other or to have one valve bigger than the other. all the intake swirl in the world isn't going to help the air get shoved down the runner. you need swirl inside the cylinder. there are various head designs in the 2 valve world that work to pull it off as well. so far as the direct injection goes that has all been figured out long ago as well it's called a diesel engine and it's been around forever. the shape of the piston head on a diesel engine (which is very similar to the shape of the head on a DI gas engine) allows a lean center flame due to the quench areas on the piston allowing as high as over 40:1 fuel ratios without burning up the pistons. Diesels actually make that black smoke and generate super high egt's (performance tuned ones watch a tractor pulling video or something) when operating at what they call near stoichiometric conditions which is a fancy way of saying 15/16:1. deisels always run lean or else there isn't enough air to cool the charge down and the super high cylinder temps melt/blow the engine apart. DI in a gas engine works the same way. it injects very little gas right before the spark to prevent detonation and relies on the shape of the piston to allow it to be able to burn such a small quantity of gasoline.

XwChriswX · 05-31-2010, 03:13 AM

Quote:

Originally Posted by 1slow370

honda had swirl figured out years ago

jpit · 05-31-2010, 04:06 AM

Hey Jpit, if you put all 10 of them on you will in theory gain up to 350 more horsepower and 500 more Ft/lbs of torque...... so be careful and start out slow, maybe only put one or two on at a time so you can get used to the power.....

Too Late....I trashed the transmission and flattened the tires with the first acceleration and then ruined my brakes when I tried to stop.

Scott @ RA · 05-31-2010, 04:22 AM

Quote:

Originally Posted by jpit

Hey Jpit, if you put all 10 of them on you will in theory gain up to 350 more horsepower and 500 more Ft/lbs of torque...... so be careful and start out slow, maybe only put one or two on at a time so you can get used to the power.....

Too Late....I trashed the transmission and flattened the tires with the first acceleration and then ruined my brakes when I tried to stop.

LOL.... hahaha. Well, I got you covered if you need any help.

CBRich · 06-01-2010, 07:57 PM

These look like a fantastic opportunity to screw up your valves if not worse.

05-31-2010, 02:59 AM	#26 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	nope no swirl. honda had swirl figured out years ago and the only real effective way to do it without to much turbulence is to have either one intake valve open farther than the other or to have one valve bigger than the other. all the intake swirl in the world isn't going to help the air get shoved down the runner. you need swirl inside the cylinder. there are various head designs in the 2 valve world that work to pull it off as well. so far as the direct injection goes that has all been figured out long ago as well it's called a diesel engine and it's been around forever. the shape of the piston head on a diesel engine (which is very similar to the shape of the head on a DI gas engine) allows a lean center flame due to the quench areas on the piston allowing as high as over 40:1 fuel ratios without burning up the pistons. Diesels actually make that black smoke and generate super high egt's (performance tuned ones watch a tractor pulling video or something) when operating at what they call near stoichiometric conditions which is a fancy way of saying 15/16:1. deisels always run lean or else there isn't enough air to cool the charge down and the super high cylinder temps melt/blow the engine apart. DI in a gas engine works the same way. it injects very little gas right before the spark to prevent detonation and relies on the shape of the piston to allow it to be able to burn such a small quantity of gasoline. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bought my Z!	m4a1mustang	New 370Z Owner	42	08-03-2011 03:30 PM
Bought a FD instead	Lock & Load	Nissan 370Z General Discussions	35	07-02-2009 07:45 AM
just bought a 370	510z	New 370Z Owner	2	03-20-2009 03:38 PM
Has anyone bought it yet?	tvfreakazoid	Nissan 370Z General Discussions	7	01-14-2009 12:55 AM
So they are here... why hasn't anyone bought one yet?	FricFrac	Nissan 370Z General Discussions	19	01-03-2009 02:42 AM

05-30-2010, 11:04 PM	#16 (permalink)
Sibze A True Z Fanatic Join Date: May 2009 Location: Ontario, Canada Posts: 16,202 Drives: In your way Rep Power: 62

05-30-2010, 11:09 PM	#17 (permalink)
Zigen5 Enthusiast Member Join Date: Jun 2009 Location: Wesley Chapel, FL Posts: 260 Drives: '10 BC 370z Roadster Rep Power: 15	Just installed 2 of them...... Its night and day!!!!! NOT!!!!!

05-31-2010, 01:47 AM	#22 (permalink)
KillerBee370 A True Z Fanatic Join Date: Mar 2009 Location: So Cal baby! Age: 51 Posts: 5,964 Drives: with passion Rep Power: 321	Turbonator with a different name. I can't believe people actually purchase this crap.

05-31-2010, 01:55 AM	#23 (permalink)
Scott @ RA Enthusiast Member Join Date: Feb 2010 Location: So Cal Posts: 410 Drives: Ridiculously Fast Rep Power: 15	Hey Jpit, if you put all 10 of them on you will in theory gain up to 350 more horsepower and 500 more Ft/lbs of torque...... so be careful and start out slow, maybe only put one or two on at a time so you can get used to the power.....

05-31-2010, 02:09 AM	#24 (permalink)
blue660r01 Guest Posts: n/a	Wow this joke is over 5yrs old. When will people stop.

05-31-2010, 02:18 AM	#25 (permalink)
gumpy Enthusiast Member Join Date: Oct 2009 Location: Sydney Posts: 449 Drives: 09 370z white manual Rep Power: 15	There is some sense to that thing... Nissan were hoping to find a solution to the complexities of direct injection by some how creating a swirl in the cylinder when the fuel is added... this might add swirl... i'm skeptical but there is some logic behind it...

05-31-2010, 04:06 AM	#28 (permalink)
jpit Enthusiast Member Join Date: Feb 2009 Location: Washington State Posts: 440 Drives: 370Z Tour MT w/Spt Rep Power: 16	Hey Jpit, if you put all 10 of them on you will in theory gain up to 350 more horsepower and 500 more Ft/lbs of torque...... so be careful and start out slow, maybe only put one or two on at a time so you can get used to the power..... Too Late....I trashed the transmission and flattened the tires with the first acceleration and then ruined my brakes when I tried to stop.

06-01-2010, 07:57 PM	#30 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 544	These look like a fantastic opportunity to screw up your valves if not worse.