What did you do with your Z today

ZForce · 05-27-2011, 11:40 PM

Hey kenchan, first off the ings look great!

Well I took the car to another alignment shop and got the toe dialed into zero on all four corners. The camber is not wild like before meaning the dealership's rachk was ouit of calibration. Took it on a run this last Sat thru the canyon and.....maybe I am not used to zero toe on all fours but it was squirming a bit in the rear and the fronts felt wierd hitting bumps in the curves. You had some concerns running zero in the rears. Should I try running some toe in on the rears? I am not the best describing what is what without any proper track driving instructions and schooling so I apologize up front if I am not sure what I am supposed to be looking for. I only had about 200 miles on these new RE-11's. Could it be the tires have not scrubbed in yet?

Here are my current specs.

New alignment as of 5/20/11

Fr Left -1.6
Fr Right -1.5
Toe Left 0.00
Toe Right 0.00
Total Toe 0.00
Steer Ahead xx.xx

Rr Left -1.3
Rr Right -1.2
Toe Left 0.00
Toe Right 0.00
Total Toe 0.00
Thrust Angle 0.00

Red__Zed · 05-28-2011, 06:49 AM

Quote:

Originally Posted by ZForce

Hey kenchan, first off the ings look great!

Well I took the car to another alignment shop and got the toe dialed into zero on all four corners. The camber is not wild like before meaning the dealership's rachk was ouit of calibration. Took it on a run this last Sat thru the canyon and.....maybe I am not used to zero toe on all fours but it was squirming a bit in the rear and the fronts felt wierd hitting bumps in the curves. You had some concerns running zero in the rears. Should I try running some toe in on the rears? I am not the best describing what is what without any proper track driving instructions and schooling so I apologize up front if I am not sure what I am supposed to be looking for. I only had about 200 miles on these new RE-11's. Could it be the tires have not scrubbed in yet?

Here are my current specs.

New alignment as of 5/20/11

Fr Left -1.6
Fr Right -1.5
Toe Left 0.00
Toe Right 0.00
Total Toe 0.00
Steer Ahead xx.xx

Rr Left -1.3
Rr Right -1.2
Toe Left 0.00
Toe Right 0.00
Total Toe 0.00
Thrust Angle 0.00

Why are you running no toe in the rear?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 05:14 PM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 03:03 PM
Just got it Today 6/14/09 :D!!!!	COD4	New 370Z Owner	15	06-21-2009 04:22 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM

05-27-2011, 11:40 PM	#1 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 21	Hey kenchan, first off the ings look great! Well I took the car to another alignment shop and got the toe dialed into zero on all four corners. The camber is not wild like before meaning the dealership's rachk was ouit of calibration. Took it on a run this last Sat thru the canyon and.....maybe I am not used to zero toe on all fours but it was squirming a bit in the rear and the fronts felt wierd hitting bumps in the curves. You had some concerns running zero in the rears. Should I try running some toe in on the rears? I am not the best describing what is what without any proper track driving instructions and schooling so I apologize up front if I am not sure what I am supposed to be looking for. I only had about 200 miles on these new RE-11's. Could it be the tires have not scrubbed in yet? Here are my current specs. New alignment as of 5/20/11 Fr Left -1.6 Fr Right -1.5 Toe Left 0.00 Toe Right 0.00 Total Toe 0.00 Steer Ahead xx.xx Rr Left -1.3 Rr Right -1.2 Toe Left 0.00 Toe Right 0.00 Total Toe 0.00 Thrust Angle 0.00