What did you do with your Z today

onzedge · 03-13-2011, 12:58 PM

Quote:

Originally Posted by kenchan

motored my Z this am.

was a goooood drive.

SP00LN · 03-13-2011, 01:36 PM

Lou @ amplified Motorsports lowered the Z on some H&Rs and threw some 15mm spacers on all 4 corners.

1slow370 · 03-13-2011, 07:47 PM

i tore my car the hell apart today

Fire · 03-14-2011, 07:16 AM

Actually was yesterday and Sat. I recieved my Eibach pro alignment kit Friday and sent my car to the shop. Previously I had Eibach springs, stillen sways and H&R 20mm spacer installed. Ofcourse they said that they could not get the alignment within specs. So Sat. I jump started my 2003 Mitsu Eclipse backed it out of the garage then jump started the Z and took it down to the shop. Sun. they called and said the the rear camber arms didn't fit. They had the toe bolts in but removed the wrong arm, easy fix and they went on to get it aligned. As set within factory specs now. Drove like a champ, just couldn't jump on it too hard with a slight amount of snow and ofcourse the top stayed up.

Trips · 03-14-2011, 09:41 PM

Quote:

Originally Posted by SP00LN

Lou @ amplified Motorsports lowered the Z on some H&Rs and threw some 15mm spacers on all 4 corners.

It was nice meeting you, and the car looks very sexy dropped

Mt Tam I am · 03-14-2011, 10:01 PM

Had an unbelievably long run without interference. This is such a great car design. Actually got the oil temp up to 220. First time I've seen it that high since I put in the oil cooler. Still works for me though.

SP00LN · 03-14-2011, 10:56 PM

Quote:

Originally Posted by Triple's

It was nice meeting you, and the car looks very sexy dropped

Likewise triples and thx. I'll be seein you guys more often!

kenchan · 03-14-2011, 04:37 PM

spooln- looks great!

for me i only looked at my Z this am before pulling out my G to go to work.

going to be lowering the psi later this week for both cars as the temps are starting to steadily climb.

CrownR426 · 03-14-2011, 04:45 PM

^Yes +1 on lowering psi weather's getting better here this week as well!
Went for a nice cruise and man are my tires poop.

BeachZTT · 03-15-2011, 07:07 AM

Painted the strut tower brace. It just got lost in the dark engine bay flat black. I think it looks better silver.

wheee! · 03-15-2011, 01:54 PM

Nice! post that up to the social group too!

Quote:

Originally Posted by BeachZTT

Painted the strut tower brace. It just got lost in the dark engine bay flat black. I think it looks better silver.

Red__Zed · 03-15-2011, 01:57 PM

Quote:

Originally Posted by BeachZTT

Painted the strut tower brace. It just got lost in the dark engine bay flat black. I think it looks better silver.

Nice. Looks a lot better than I would have thought.

BeachZTT · 03-15-2011, 02:40 PM

Quote:

Originally Posted by wheee!

Nice! post that up to the social group too!

Will do!

Quote:

Originally Posted by Red__Zed

Nice. Looks a lot better than I would have thought.

Thanks guys!

SPOHN · 03-15-2011, 07:16 AM

Made up a oil cooler block off plate.

EazyD · 03-15-2011, 09:19 AM

I'm in the waiting room at the dealer right now getting my first oil change at 2600 miles. Nervoussss.. I think they are putting in conventional. Is that ok? Maybe I'll do mobil1 next time?

03-13-2011, 01:36 PM	#2 (permalink)
SP00LN Base Member Join Date: Feb 2011 Location: 91370 Posts: 107 Drives: 09 370z SR M6 Rep Power: 15	Lou @ amplified Motorsports lowered the Z on some H&Rs and threw some 15mm spacers on all 4 corners. Last edited by SP00LN; 03-13-2011 at 06:19 PM.

03-13-2011, 07:47 PM	#3 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	i tore my car the hell apart today __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

03-14-2011, 07:16 AM	#4 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 43	Actually was yesterday and Sat. I recieved my Eibach pro alignment kit Friday and sent my car to the shop. Previously I had Eibach springs, stillen sways and H&R 20mm spacer installed. Ofcourse they said that they could not get the alignment within specs. So Sat. I jump started my 2003 Mitsu Eclipse backed it out of the garage then jump started the Z and took it down to the shop. Sun. they called and said the the rear camber arms didn't fit. They had the toe bolts in but removed the wrong arm, easy fix and they went on to get it aligned. As set within factory specs now. Drove like a champ, just couldn't jump on it too hard with a slight amount of snow and ofcourse the top stayed up. __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

03-14-2011, 10:01 PM	#6 (permalink)
Mt Tam I am A True Z Fanatic Join Date: Jun 2010 Location: California Posts: 10,709 Drives: 370Z T/S/N 6MT & XKE Rep Power: 3844	Had an unbelievably long run without interference. This is such a great car design. Actually got the oil temp up to 220. First time I've seen it that high since I put in the oil cooler. Still works for me though. __________________ "Does the carpet match the drapes? NO!!! I don't date bald women." Nissan Motorsports 34R Oil Cooler. Stillen CBE. Hotchkis Sport Sway Bars. KW Variant 3 Coilover System. Stillen Gen3 CAI. Michelin Pilot Super Sport. Stillen Brake Ducts. Carbotech™ XP10/XP8 Pads. Z1 Front Rotors. Z1 Stainless Brake Lines. Two degrees of camber

03-14-2011, 04:45 PM	#9 (permalink)
CrownR426 A True Z Fanatic Join Date: Nov 2008 Location: South Korea Posts: 4,676 Drives: Manual Rep Power: 848	^Yes +1 on lowering psi weather's getting better here this week as well! Went for a nice cruise and man are my tires poop. __________________ Love + Hardwork + Passion RIP SVTRacer

03-14-2011, 04:37 PM	#8 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	spooln- looks great! for me i only looked at my Z this am before pulling out my G to go to work. going to be lowering the psi later this week for both cars as the temps are starting to steadily climb.

03-15-2011, 07:07 AM	#10 (permalink)
BeachZTT Track Member Join Date: Jul 2009 Location: Colorado Posts: 746 Drives: '10 BC ZR T/S/Nav Rep Power: 18	Painted the strut tower brace. It just got lost in the dark engine bay flat black. I think it looks better silver. __________________ '10 ZR Black Cherry Sport/Touring/Nav, Swift Springs, Stillen G3s, 15mm-F 20mm-R Spacers, SPC, Spoiler Solutions Rear Wing, Stubby Antenna

03-15-2011, 07:16 AM	#14 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 222	Made up a oil cooler block off plate. __________________

03-15-2011, 09:19 AM	#15 (permalink)
EazyD A True Z Fanatic Join Date: Nov 2009 Location: Massachusetts, USA Posts: 1,211 Drives: 2010 6MT Sport pkg. Rep Power: 26	I'm in the waiting room at the dealer right now getting my first oil change at 2600 miles. Nervoussss.. I think they are putting in conventional. Is that ok? Maybe I'll do mobil1 next time? __________________ Pearl White 2010 370Z Sport, Stillen CBE, tint, K&N drop-in filters, GT-R start button, Kenwood DNX-6980 with backup cam, LED bulbs, Raceseng shift knob.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 05:14 PM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 03:03 PM
Just got it Today 6/14/09 :D!!!!	COD4	New 370Z Owner	15	06-21-2009 04:22 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM