What did you do with your Z today

FromG2Z · 06-02-2011, 08:24 AM

Quote:

Originally Posted by kenchan

eerrr... i must get DSLR.

nice picts, G2Z!

Thanks Ken.... how long must I "tease" you???

Also, I now have 1213 miles on Zena.... WOOHOOOOOO.... I finally rev'd it to about 7k rpm last night. Still didn't get to redline yet, but I don't think I need to

Zena stays covered in the garage today.... strong storms in the area

kenchan · 06-02-2011, 08:37 AM

Tanooki- check out the DiNoc thread in the interior/exterior section. I posted quite a bit in there.

Quote:

Originally Posted by FromG2Z

Thanks Ken.... how long must I "tease" you???

Also, I now have 1213 miles on Zena.... WOOHOOOOOO.... I finally rev'd it to about 7k rpm last night. Still didn't get to redline yet, but I don't think I need to

Zena stays covered in the garage today.... strong storms in the area

LOL. I will probably have one this summer.

still juggling around my $ and which project to work on next with available time in consideration as well.

Yah, definitely keep zena at home if u know storm's coming.

Mt Tam I am · 06-02-2011, 11:06 AM

I was up late last night and was rewarded with an obstruction free drive home. What a great car we all have here.

Econ · 06-02-2011, 08:18 AM

got my 1000th post today.

chops · 06-02-2011, 02:07 PM

finalllllyyy got to drive it. felt so nice to be back in it. i tried to give it some revs on the long stretch of road before i turn into my office, but some idiot in a BMW X5 decides to slam on the brakes instead of going through a yellow light.

Super Tanooki · 06-02-2011, 05:25 PM

Got my Stillen 24r OC today! Whoop whoop!

Now to figure out if I can install this bad boy myself. The instructions included are for a G which, no matter how similar the cars are, is a little unsettling for a newbie like myself. And I've seen a few really good DIY threads but they either install it in front of the steering cooler (I want it the other side) and/or they cut holes into a metal plate through which to pass the lines, but I don't want to do that if it's not necessary. Which it isn't - I know two guys in Vegas who have this kit and never cut anything.

So I need a driver's side install DIY with no cutting on this kit. Is there one I've missed?

SPOHN · 06-02-2011, 06:17 PM

I made plans for this weekend to remove my spare tire ( should of done the day I bought it) and windshield washer resivor. All to remove some weight.

xdeslitx · 06-02-2011, 06:19 PM

I'll post pics sometime this weekend...been doing quite a few things with the car this past month

Waiz · 06-02-2011, 07:05 PM

Quote:

Originally Posted by xdeslitx

I'll post pics sometime this weekend...been doing quite a few things with the car this past month

I think I might have actually matched your spending total this month

xdeslitx · 06-02-2011, 07:40 PM

Quote:

Originally Posted by Waizzz

I think I might have actually matched your spending total this month

have you? what else did you buy??

EDIT: crap why did you have to remind me how much I spent this month

KW V3...H&R...Invidia...front lip...Samco...Sun Auto...nismo titanium shift knob and PW JDM knob (still deciding which one I want to use)...Stillen license plate bracket(which I took off right away because it looks better without a plate)...

Waiz · 06-02-2011, 09:35 PM

Quote:

Originally Posted by xdeslitx

have you? what else did you buy??

EDIT: crap why did you have to remind me how much I spent this month

KW V3...H&R...Invidia...front lip...Samco...Sun Auto...nismo titanium shift knob and PW JDM knob (still deciding which one I want to use)...Stillen license plate bracket(which I took off right away because it looks better without a plate)...

Brembos, Muteki Lugs, StopTech pads, StopTech stainless steel lines, StopTech slotted rotors, Motul fluid, Stillen HFC's, and painted 2006+ headlights.

All that in less than ten days

Alchemy · 06-02-2011, 06:21 PM

Quote:

Originally Posted by SPOHN

I made plans for this weekend to remove my spare tire ( should of done the day I bought it) and windshield washer resivor. All to remove some weight.

I agree, I have been wanting to rip that spare out since I got it. Not sure why I havent yet, maybe ill rip mine out this weekend too

kenchan · 06-02-2011, 08:42 PM

you guys have been busy today.

finally got out of a meeting, after work met with a buddy of mine to sell some of my dd's misc bits, headed to the post office a minute too late so used the machine and confused the hell out of me

and went home took out the trash stared at my Z

and had supper and did bills and got minded again i spent over $900 to replace the 12mm scratch.

which reminds me, i need to take my spare Weds to storage tonight.

happytheman · 06-02-2011, 09:07 PM

Quote:

Originally Posted by kenchan

you guys have been busy today.

finally got out of a meeting, after work met with a buddy of mine to sell some of my dd's misc bits, headed to the post office a minute too late so used the machine and confused the hell out of me

and went home took out the trash stared at my Z

and had supper and did bills and got minded again i spent over $900 to replace the 12mm scratch.

which reminds me, i need to take my spare Weds to storage tonight.

The missus giving you a hard time about spending the money? Are you neglecting the bills? Falling behind on you mortgage? No? Then tell her to shaddup!

On second thought, once you tell her to shaddup, tell her to go fetch you a turkey pot pie (and be quick about it, lest you put your foot in her ***)!!

kenchan · 06-02-2011, 09:45 PM

Quote:

Originally Posted by happytheman

The missus giving you a hard time about spending the money? Are you neglecting the bills? Falling behind on you mortgage? No? Then tell her to shaddup!

On second thought, once you tell her to shaddup, tell her to go fetch you a turkey pot pie (and be quick about it, lest you put your foot in her ***)!!

Hahaha, nono, I was just looking at my spending for may and just reminded myself. She doesn't care how I spend my allowance. I don't care how she spends her allowance either.

have to say though, my wife is a great chef.

06-02-2011, 11:06 AM	#3 (permalink)
Mt Tam I am A True Z Fanatic Join Date: Jun 2010 Location: California Posts: 10,709 Drives: 370Z T/S/N 6MT & XKE Rep Power: 3844	I was up late last night and was rewarded with an obstruction free drive home. What a great car we all have here. __________________ "Does the carpet match the drapes? NO!!! I don't date bald women." Nissan Motorsports 34R Oil Cooler. Stillen CBE. Hotchkis Sport Sway Bars. KW Variant 3 Coilover System. Stillen Gen3 CAI. Michelin Pilot Super Sport. Stillen Brake Ducts. Carbotech™ XP10/XP8 Pads. Z1 Front Rotors. Z1 Stainless Brake Lines. Two degrees of camber

06-02-2011, 08:18 AM	#4 (permalink)
Econ A True Z Fanatic Join Date: Jan 2011 Location: New York City Posts: 2,546 Drives: Fiat? Rep Power: 20	got my 1000th post today. __________________ 2014 Triumph Thruxton 900 2013 Fiat 500 Abarth 2009 Nissan 370z

06-02-2011, 06:17 PM	#7 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 222	I made plans for this weekend to remove my spare tire ( should of done the day I bought it) and windshield washer resivor. All to remove some weight. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 05:14 PM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 03:03 PM
Just got it Today 6/14/09 :D!!!!	COD4	New 370Z Owner	15	06-21-2009 04:22 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM

06-02-2011, 02:07 PM	#5 (permalink)
chops A True Z Fanatic Join Date: Oct 2010 Location: NA Posts: 1,732 Drives: NA Rep Power: 22	finalllllyyy got to drive it. felt so nice to be back in it. i tried to give it some revs on the long stretch of road before i turn into my office, but some idiot in a BMW X5 decides to slam on the brakes instead of going through a yellow light.

06-02-2011, 05:25 PM	#6 (permalink)
Super Tanooki Base Member Join Date: Jul 2010 Location: Las Vegas Posts: 217 Drives: 370Z MT Base/Spt Red Rep Power: 16	Got my Stillen 24r OC today! Whoop whoop! Now to figure out if I can install this bad boy myself. The instructions included are for a G which, no matter how similar the cars are, is a little unsettling for a newbie like myself. And I've seen a few really good DIY threads but they either install it in front of the steering cooler (I want it the other side) and/or they cut holes into a metal plate through which to pass the lines, but I don't want to do that if it's not necessary. Which it isn't - I know two guys in Vegas who have this kit and never cut anything. So I need a driver's side install DIY with no cutting on this kit. Is there one I've missed?

06-02-2011, 06:19 PM	#8 (permalink)
xdeslitx A True Z Fanatic Join Date: Jul 2010 Location: Tu-jungle, CA Posts: 13,045 Drives: Yaris Rep Power: 64	I'll post pics sometime this weekend...been doing quite a few things with the car this past month

06-02-2011, 08:42 PM	#13 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	you guys have been busy today. finally got out of a meeting, after work met with a buddy of mine to sell some of my dd's misc bits, headed to the post office a minute too late so used the machine and confused the hell out of me and went home took out the trash stared at my Z and had supper and did bills and got minded again i spent over $900 to replace the 12mm scratch. which reminds me, i need to take my spare Weds to storage tonight.