Mystery Question

fullmonty · 04-09-2010, 05:25 PM

Its a diickfore

kenchan · 04-09-2010, 06:48 PM

could be a support that goes inside the bumper. i know my car has a few foam blocks with weak adhesives that i had to re-attach after doing the rear camera install.

vipor · 04-09-2010, 06:53 PM

rubber, not foam.

might just be a contact "pad" as stated before so the assembly robots don't scratch the metal

kenchan · 04-09-2010, 07:04 PM

Quote:

Originally Posted by vipor

rubber, not foam.

might just be a contact "pad" as stated before so the assembly robots don't scratch the metal

shut up vipor. wasnt talking to you.

vipor · 04-09-2010, 07:05 PM

Quote:

Originally Posted by kenchan

shut up vipor. wasnt talking to you.

kenchan · 04-09-2010, 07:07 PM

Quote:

Originally Posted by vipor

ok ok, you're in.

lando76 · 04-10-2010, 11:17 AM

If you find one weird thing, just scratch your head and move on. If you find two scratch your head again followed with a "WTF" . Thats all I can do.

SoCal 370Z · 04-10-2010, 05:03 PM

Here is the mystery piece. Kenchan is this the same one you are referencing too? Thanks.

kenchan · 04-10-2010, 05:16 PM

no, mine was like a block. that looks more in-line with packaging material the others were talking about.

i wouldn't worry too much.

MightyBobo · 04-10-2010, 09:34 PM

Looks to me like excess material during construction. Dont sweat it, it sure isnt anything important.

04-09-2010, 05:25 PM	#1 (permalink)
fullmonty A True Z Fanatic Join Date: Nov 2009 Location: Dirty Jersey Posts: 7,762 Drives: 370 Touring/Sport Rep Power: 34	Its a diickfore __________________

04-09-2010, 06:53 PM	#3 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 43 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	rubber, not foam. might just be a contact "pad" as stated before so the assembly robots don't scratch the metal __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

04-10-2010, 05:03 PM	#8 (permalink)
SoCal 370Z A True Z Fanatic Join Date: Feb 2009 Location: US of A Posts: 2,842 Drives: Answers Rep Power: 34	Here is the mystery piece. Kenchan is this the same one you are referencing too? Thanks. __________________ ( Click to show/hide ) Why I NEVER say NO to the Panda Lou Fusz!!! Last edited by SoCal 370Z; 04-10-2010 at 10:49 PM.

04-10-2010, 09:34 PM	#10 (permalink)
MightyBobo A True Z Fanatic Join Date: Feb 2009 Location: Las Vegas, NV Posts: 8,465 Drives: No cars; only bikes Rep Power: 53	Looks to me like excess material during construction. Dont sweat it, it sure isnt anything important. __________________ I don't own a car anymore.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mystery Wheel?	carfr3ak	Wheels & Tires	29	02-18-2010 10:04 AM
Mystery photo . what is this..where is this?	cave vulture	The Lounge (Off Topic)	67	11-24-2009 04:45 PM
mystery fuse	BOBz	Nissan 370Z General Discussions	11	11-09-2009 02:30 PM
Mystery SES light	Mrabyss	Engine & Drivetrain	2	10-16-2009 08:54 AM
Mystery bar dog ......... ?	cave vulture	The Lounge (Off Topic)	16	07-16-2009 01:42 AM

04-09-2010, 06:48 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	could be a support that goes inside the bumper. i know my car has a few foam blocks with weak adhesives that i had to re-attach after doing the rear camera install.

04-10-2010, 11:17 AM	#7 (permalink)
lando76 Base Member Join Date: Jul 2009 Location: ca Posts: 107 Drives: N/A Rep Power: 17	If you find one weird thing, just scratch your head and move on. If you find two scratch your head again followed with a "WTF" . Thats all I can do.

04-10-2010, 05:16 PM	#9 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	no, mine was like a block. that looks more in-line with packaging material the others were talking about. i wouldn't worry too much.