Shifting Into First Not Possible...

Jeffblue · 03-15-2010, 05:10 PM

I haven't gotten my Z yet, I have never owned my own MT car, only driven those of friends, and i know never to shift into first while moving at any sort of significant speed. definitely not if i'm at 3k in 2nd.

Vegasboricua · 03-15-2010, 05:18 PM

Totally bad idea to shift into 1st gear...especially at that speed. The 2nd gear is very good. I pretty much been in a dead stop in second and never had a problem. I usually dont shift into first unless im at a light. At stop signs I keep it at 2nd because ill still be rolling very lightly

spitfire9200 · 03-15-2010, 05:22 PM

Yeah I have never, ever heard of anyone shifting from 2nd to 1st at 3k RPMs.

I only go into first if i'm going about 3 mph or stopped. 2nd gear in this car has enough torque to keep the car going without stalling until you hit like 1 mph

m4a1mustang · 03-15-2010, 05:34 PM

Quote:

Originally Posted by semtex

The same people who spin out when they turn VDC off.

tonybui · 03-15-2010, 06:06 PM

I was once going like a little bit over 5 mph and i couldn't get into 1st. I felt something pushed it out and I didn't force it since

mattkim85 · 03-15-2010, 06:45 PM

Quote:

Originally Posted by soCo

It's probably a safety feature put on by nissan to stop you from doing it. Most auto manufacturers design their cars so that they do not go into 1st very easily unless the car is stopped or going very slowly. The actual act of downshifting into 1st isn't bad when done correctly, but can be very expensive if you get it wrong.

1st is for starting to get the car rolling, all the other gears are for while it's in motion.

its probably designed like that so you wouldnt mis shift trying to go into 3rd and end up going into 1st going WOT @ 70mph and blowing your transmission

wishihadnav · 03-15-2010, 07:09 PM

lol..its possible and the dealors gonna tell you the same thing all of us did.. dont do it.

earwicker7 · 03-15-2010, 07:17 PM

Quote:

Originally Posted by mattkim85

its probably designed like that so you wouldnt mis shift trying to go into 3rd and end up going into 1st going WOT @ 70mph and blowing your transmission

Which a friend actually did in my 911 (I was passed out in the back seat)

. The mechanic said he found pieces of the engine an inch away from where they were supposed to be (although he was prone to exaggeration so he might have been full of it).

370Zsteve · 03-15-2010, 07:19 PM

Quote:

Originally Posted by Hugoneus

Today I tried to down-shift from 2nd to first gear and it just wouldn't go. My RPM on 2nd was at about 3k. Then I pushed really hard and it went into first. But I had to push really hard. I don't think that is normal.

I mean for a 40k car, shouldn't it have a smooth shift? Has anyone else have this experience? It is really frustrating me.

I am going to take it to the dealer very soon. I just hit 1k, so I need my first oil change anyway.

Why are you downshifting into first? That's insane.

370Zsteve · 03-15-2010, 07:22 PM

Quote:

Originally Posted by Hugoneus

Thanks for the replies.

For those of you who chose to attack me, can you explain to me why I would NOT be able to down shift into first? What is the mechanical limitation?

I have often noticed that it is hard to shift into first or second, I think it is worthwhile to understand why.

Have you guys actually tried to down-shift from 2nd to 1st? Is it very hard to do? Or impossible?

370Zsteve · 03-15-2010, 07:23 PM

Quote:

Originally Posted by Hugoneus

Dear AK370Z,

Have you ever down-shifted into first yourself? Could you do it? Did you use a lot of force to shift?

370Zsteve · 03-15-2010, 07:27 PM

Quote:

Originally Posted by dad

Who in the hell taught some of you to drive?

1st gear is for a "dead stop start"!

Don't-Do Not-Shift into 1st gear if you are moving.>>> "Unless" your engine coughs-sputters, leave it what ever gear your driving.

m4a1mustang · 03-15-2010, 07:38 PM

Quote:

Originally Posted by 370Zsteve

That better be movie butter popcorn.

Trips · 03-15-2010, 07:42 PM

Someone Pass the Raisinettes....

DooDooBrown · 03-15-2010, 08:22 PM

This is normal... Happens all the time in my Z. You are going too fast. Once you get down to like 10 mph or something, it will go in.... It is preventing you from doing damage to the car!

03-15-2010, 05:18 PM	#32 (permalink)
Vegasboricua Track Member Join Date: Jan 2010 Location: North Las Vegas Age: 37 Posts: 697 Drives: 10 370Z PW M6 BASE Rep Power: 598	Totally bad idea to shift into 1st gear...especially at that speed. The 2nd gear is very good. I pretty much been in a dead stop in second and never had a problem. I usually dont shift into first unless im at a light. At stop signs I keep it at 2nd because ill still be rolling very lightly __________________ // K&N Drop Ins // Illuminated Kick Plates // 35% Tints // [ Facebook \| Twitter ]

03-15-2010, 07:42 PM	#44 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	Someone Pass the Raisinettes.... __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rough shifting 7AT	rico magic	Engine & Drivetrain	10	07-08-2011 02:30 AM
Shifting from 5th to 6th.	gh0st3794	Engine & Drivetrain	1	02-19-2010 03:11 PM
MT Shifting Question(s)	Slynky	Engine & Drivetrain	30	02-10-2010 06:03 PM
Clunky Shifting?	DooDooBrown	Engine & Drivetrain	15	11-07-2009 06:27 AM
Difficulty shifting from 2nd to 3rd?	Z-WHIZ	Nissan 370Z General Discussions	5	10-09-2009 09:16 PM

03-15-2010, 05:10 PM	#31 (permalink)
Jeffblue A True Z Fanatic Join Date: Dec 2009 Location: NY Age: 37 Posts: 9,192 Drives: Z32TT & 335xi Coupe Rep Power: 38	I haven't gotten my Z yet, I have never owned my own MT car, only driven those of friends, and i know never to shift into first while moving at any sort of significant speed. definitely not if i'm at 3k in 2nd.

03-15-2010, 05:22 PM	#33 (permalink)
spitfire9200 Enthusiast Member Join Date: Jun 2009 Location: Reston, VA Posts: 390 Drives: 13' E92 M3 Rep Power: 17	Yeah I have never, ever heard of anyone shifting from 2nd to 1st at 3k RPMs. I only go into first if i'm going about 3 mph or stopped. 2nd gear in this car has enough torque to keep the car going without stalling until you hit like 1 mph

03-15-2010, 06:06 PM	#35 (permalink)
tonybui A True Z Fanatic Join Date: May 2009 Location: Maryland Posts: 1,397 Drives: 09 Sports 6 Speed Rep Power: 428	I was once going like a little bit over 5 mph and i couldn't get into 1st. I felt something pushed it out and I didn't force it since

03-15-2010, 07:09 PM	#37 (permalink)
wishihadnav A True Z Fanatic Join Date: Nov 2009 Location: 90090 Posts: 1,851 Drives: Force Fed Nismo Rep Power: 184	lol..its possible and the dealors gonna tell you the same thing all of us did.. dont do it.

03-15-2010, 08:22 PM	#45 (permalink)
DooDooBrown Base Member Join Date: Jun 2009 Location: Ranson, WV Posts: 178 Drives: 09 370 Touring w/spt Rep Power: 17	This is normal... Happens all the time in my Z. You are going too fast. Once you get down to like 10 mph or something, it will go in.... It is preventing you from doing damage to the car!