What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

abm89 · 12-10-2021, 11:15 AM

That’s interesting. Seb was curious to see if I could get it down to E10 but it’s not looking like my usual station goes that low

rspray2000 · 12-12-2021, 03:04 PM

Started oil change, forgot I was out of oil filters, will finish tomorrow. Also installed Z1 undershroud and a silicone license plate frame/pad. Bummer that the magnetic oil plug I bought off Amazon warehouse a while ago is wrong size. Oh well, I’ll be using Blackstone oil analysis for the last 3300 miles I put on this oil.

A Black Z34 · 12-12-2021, 11:24 PM

Washed it and it rained right after...as always

abm89 · 12-13-2021, 01:12 PM

Ethanol content is slowly creeping down, so I'm now using the Z as my primary vehicle when possible. I also ordered a stack of miscellaneous parts to fix some broken or missing items (exhaust hangers, cat brace, battery cover, etc.)

I installed the Zspec strut bar titanium hardware (black). It looks really nice. I also installed the Lasfit LED retrofit for the headlights. combined with the STi lenses I have in the housings already, it's a huge difference in low beam performance. I'm glad I went with that considering I'm not a huge fan of the Morimoto design. Next on the list is a carbon engine cover and cooling plate, as well as a new Sparco 383 and works bell quick release (the latter two items are ordered)

JARblue · 12-13-2021, 01:33 PM

Went offroading in the Z. Another trip to the body shop

Sudden maneuver, cold tires, bad input. Driver that caused it drove off so I don't really have any recourse except insurance.

abm89 · 12-13-2021, 01:35 PM

Do you have a dash cam?!

JARblue · 12-13-2021, 01:35 PM

Finally got my Thinkware U100 dash cam installed and running this morning

Procrastination ftl

Spooler · 12-13-2021, 01:43 PM

Quote:

Originally Posted by JARblue

Went offroading in the Z. Another trip to the body shop

Sudden maneuver, cold tires, bad input. Driver that caused it drove off so I don't really have any recourse except insurance.

I sure as heck don't want to drive to Austin again. Holey crap at the idiots.

abm89 · 12-13-2021, 01:48 PM

Leave plenty of space and expect them to cut you off like Verstappen.

Spooler · 12-13-2021, 01:57 PM

Quote:

Originally Posted by abm89

Leave plenty of space and expect them to cut you off like Verstappen.

Now that made me LMAO!!!!

abm89 · 12-14-2021, 07:50 PM

Quote:

Originally Posted by abm89

Leave plenty of space and expect them to cut you off like Verstappen.

Twice tonight and someone had the nerve to flash their lights at me to "hurry" up when merging onto another street. I let them know they were number 1. (Murray Walkerism)

I did receive my NISMO radiator cap today from Japan. Probably the easiest install compared to what I've done lately.

Ghostvette · 12-15-2021, 07:52 AM

Quote:

Originally Posted by abm89

Twice tonight and someone had the nerve to flash their lights at me to "hurry" up when merging onto another street. I let them know they were number 1. (Murray Walkerism)

I did receive my NISMO radiator cap today from Japan. Probably the easiest install compared to what I've done lately.

Must have been one of those 'escapees' from the Granola Bowl.

ubermoore · 12-18-2021, 12:57 AM

Got tired of losing the toe setting so I swapped in a set of SPL mid-links. Went with 6” Swift springs in 11K. Did the traction arms while I was under there, too.

abm89 · 12-23-2021, 08:51 PM

I've been driving the Z around, still getting rid of any ethanol left in the tank. If it doesn't go down after that, I might have a bad flex fuel sensor that needs swapping. Damn saddle tank.

Tomorrow I'll install the $300 worth of miscellaneous parts to get rid of rattles and replace broken or missing trim pieces. I needed a break as Monday and Tuesday were spent giving my WRX a massive suspension upgrade.

abm89 · 12-24-2021, 02:39 PM

Never underestimate the convenience of keeping random hardware in a box. I managed to forget to order a few bolts and nuts, but i had enough lying around get the work done.

- New cat brace installed
- Driver side exhaust hanger re-installed. I couldn't do the passenger side as the bolt on that one was stripped. Extracting that requires tools I don't have so I'll deal with that side later.
- re-adjusted exhaust system
- re-adjusted my diffuser (strategic zip-tie supports until i get around to designing custom ones for the middle portion).
- installed new front undertray plastic side pieces. Added appropriate hardware
- re-adjusted the undertray positioning now that all of the correct parts are in their place
- installed new bumper screws as well as the plastic retaining clip that goes into the fender
- tied the washer fluid motor out of the way so it stops knocking against my fender.

And the result is now only the rattles from my SPL Endlinks!

12-10-2021, 11:15 AM	#5731 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,387 Drives: 11 370Z \| 24 EL450 Rep Power: 64764	That’s interesting. Seb was curious to see if I could get it down to E10 but it’s not looking like my usual station goes that low redondoaveb likes this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

12-12-2021, 03:04 PM	#5732 (permalink)
rspray2000 Base Member Join Date: Mar 2019 Location: MA Posts: 169 Drives: 2013 T/S Roadster AT Rep Power: 4235	Started oil change, forgot I was out of oil filters, will finish tomorrow. Also installed Z1 undershroud and a silicone license plate frame/pad. Bummer that the magnetic oil plug I bought off Amazon warehouse a while ago is wrong size. Oh well, I’ll be using Blackstone oil analysis for the last 3300 miles I put on this oil. abm89 and ZontheRocks like this.

12-12-2021, 11:24 PM	#5733 (permalink)
A Black Z34 Base Member Join Date: Dec 2018 Location: WA Posts: 64 Drives: 16 370 Nismo Tech 6M Rep Power: 11833	Washed it and it rained right after...as always abm89 likes this.

12-13-2021, 01:12 PM	#5734 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,387 Drives: 11 370Z \| 24 EL450 Rep Power: 64764	Ethanol content is slowly creeping down, so I'm now using the Z as my primary vehicle when possible. I also ordered a stack of miscellaneous parts to fix some broken or missing items (exhaust hangers, cat brace, battery cover, etc.) I installed the Zspec strut bar titanium hardware (black). It looks really nice. I also installed the Lasfit LED retrofit for the headlights. combined with the STi lenses I have in the housings already, it's a huge difference in low beam performance. I'm glad I went with that considering I'm not a huge fan of the Morimoto design. Next on the list is a carbon engine cover and cooling plate, as well as a new Sparco 383 and works bell quick release (the latter two items are ordered) JARblue, Rusty, Hotrodz and 2 others like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build Last edited by abm89; 12-13-2021 at 03:56 PM.

12-13-2021, 01:33 PM	#5735 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	Went offroading in the Z. Another trip to the body shop Sudden maneuver, cold tires, bad input. Driver that caused it drove off so I don't really have any recourse except insurance. Rusty, Hotrodz, Ghostvette and 5 others like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

12-13-2021, 01:35 PM	#5736 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,387 Drives: 11 370Z \| 24 EL450 Rep Power: 64764	Do you have a dash cam?! __________________ Complete Parts List: https://github.com/abm89/ztouge-build

12-13-2021, 01:35 PM	#5737 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	Finally got my Thinkware U100 dash cam installed and running this morning Procrastination ftl cv129, Rusty, Hotrodz and 4 others like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

12-13-2021, 01:48 PM	#5739 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,387 Drives: 11 370Z \| 24 EL450 Rep Power: 64764	Leave plenty of space and expect them to cut you off like Verstappen. JARblue, cv129, Rusty and 7 others like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

12-23-2021, 08:51 PM	#5744 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,387 Drives: 11 370Z \| 24 EL450 Rep Power: 64764	I've been driving the Z around, still getting rid of any ethanol left in the tank. If it doesn't go down after that, I might have a bad flex fuel sensor that needs swapping. Damn saddle tank. Tomorrow I'll install the $300 worth of miscellaneous parts to get rid of rattles and replace broken or missing trim pieces. I needed a break as Monday and Tuesday were spent giving my WRX a massive suspension upgrade. JARblue and Hotrodz like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

12-24-2021, 02:39 PM	#5745 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,387 Drives: 11 370Z \| 24 EL450 Rep Power: 64764	Never underestimate the convenience of keeping random hardware in a box. I managed to forget to order a few bolts and nuts, but i had enough lying around get the work done. - New cat brace installed - Driver side exhaust hanger re-installed. I couldn't do the passenger side as the bolt on that one was stripped. Extracting that requires tools I don't have so I'll deal with that side later. - re-adjusted exhaust system - re-adjusted my diffuser (strategic zip-tie supports until i get around to designing custom ones for the middle portion). - installed new front undertray plastic side pieces. Added appropriate hardware - re-adjusted the undertray positioning now that all of the correct parts are in their place - installed new bumper screws as well as the plastic retaining clip that goes into the fender - tied the washer fluid motor out of the way so it stops knocking against my fender. And the result is now only the rattles from my SPL Endlinks! JARblue, Hotrodz, Memphis370Z and 1 others like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM