Nissan 370Z Forum
Page 78 of 164 « First 28687677 78 798088128 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Nissan 370Z General Discussions (http://www.the370z.com/nissan-370z-general-discussions/)
-   -   What did you do with your Z today V (ON TOPIC DISCUSSION ONLY) (http://www.the370z.com/nissan-370z-general-discussions/122002-what-did-you-do-your-z-today-v-topic-discussion-only.html)

BettyZ 05-09-2019 11:50 AM
So in that case I take back what I said about your dainty hands JAR.

Sent from my SM-G955U using Tapatalk

Ghostvette 05-09-2019 02:58 PM
Quote:
Originally Posted by JARblue (Post 3850993)
The splash guards mount to plastic bits like the fender liners and some next to the side skirts. No holes in painted body panels...
Which is why I need all the help I can get. These are OEM pieces and they have instructions and all hardware needed to mount them. I just have to be able to see what I'm doing.... :wtf2:

mishuko 05-10-2019 07:12 AM
About to pull the trigger on FI exhaust. Debate is the ss or cf muffler. Fml. Tony pls rush the order from whitehead!!! Lol

madwi 05-10-2019 07:19 AM
Quote:
Originally Posted by mishuko (Post 3851208)
About to pull the trigger on FI exhaust. Debate is the ss or cf muffler. Fml. Tony pls rush the order from whitehead!!! Lol
Get the Carbon Fiber then ship it to me and I'll ship you the SS. :ugh2: I kinda am kicking myself for not going with the CF.

mishuko 05-10-2019 07:32 AM
Quote:
Originally Posted by madwi (Post 3851211)
Get the Carbon Fiber then ship it to me and I'll ship you the SS. :ugh2: I kinda am kicking myself for not going with the CF.
I sent an email off... if it will take longer for the cf it is a bit of a turnoff. But same time itll be black car with cf muffler be ninja

BettyZ 05-10-2019 08:35 AM
Quote:
Originally Posted by mishuko (Post 3851213)
I sent an email off... if it will take longer for the cf it is a bit of a turnoff. But same time itll be black car with cf muffler be ninja
I have black nismo with SS cans.. frankly I'd have gone with CF

Sent from my SM-G955U using Tapatalk

mishuko 05-10-2019 08:40 AM
Order placed... 18 resonators and cf cans

Nixin 05-10-2019 08:48 AM
Fi cbe
 
Quote:
Originally Posted by mishuko (Post 3851232)
Order placed... 18 resonators and cf cans
Good for you mishuko. You will not be disappointed. BTW, what took you so long?

sp911 05-10-2019 09:02 AM
trip to local nursery. loaded her up with 2 bags of all-purpose sand, 1 hanging plant, large flower pot, 3 each of zucchini, squash and cucumber plants. thank you weathertech cargo liner!

dboss 05-10-2019 09:56 AM
Quote:
Originally Posted by mishuko (Post 3851232)
Order placed... 18 resonators and cf cans
Just got that same setup installed on my car yesterday. It honestly surpassed my expectations and sounds amazing. You'll love it.

Ghostvette 05-10-2019 10:35 AM
Quote:
Originally Posted by Nixin (Post 3851236)
Good for you mishuko. You will not be disappointed. BTW, what took you so long?
I think this is his second car, the first one had a close encounter of the terrible kind..... :icon14::icon14:

dts3 05-10-2019 02:34 PM
Put on my Greddy Evolution GT exhaust today
:yum:

Whjaxn17 05-10-2019 02:39 PM
Quote:
Originally Posted by dts3 (Post 3851335)
Put on my Greddy Evolution GT exhaust today
:yum:
:iagree:

mishuko 05-10-2019 08:00 PM
Quote:
Originally Posted by Nixin (Post 3851236)
Good for you mishuko. You will not be disappointed. BTW, what took you so long?
Life unfortunately... was going to do it in winter but yea... hetter late than never!

Quote:
Originally Posted by Ghostvette (Post 3851273)
I think this is his second car, the first one had a close encounter of the terrible kind..... :icon14::icon14:
Those a holes! The crazy part was i got stillen cbe and gen3s for what it cost to get the stillen cbe now! Well cannot wait... vroom vroom!

Rusty 05-10-2019 11:23 PM
Up-dated my build thread with the ARP splitter install. :tup:

http://www.the370z.com/members-370z-...ml#post3851460

Leingod 05-11-2019 05:53 PM
Day 1 of prep for zdayz is done.

https://live.staticflickr.com/65535/...3f05c59f_c.jpg

Rusty 05-11-2019 08:03 PM
I just washed my Z. Used Wax as your dry chit. Cleaned the inside. I fvckin' HATE cleaning inside windows :shakes head:

Spooler 05-11-2019 08:08 PM
Quote:
Originally Posted by Rusty (Post 3851612)
I just washed my Z. Used Wax as your dry chit. Cleaned the inside. I fvckin' HATE cleaning inside windows :shakes head:
Get a spray bottle and fill with water, then put in 1 tablespoon of distilled white vinegar. It works like a champ. Little stinky but you don't have to clean them 2 and 3 times to get them not to streak.

Leingod 05-12-2019 03:40 PM
So $50 in painters tape and this is happening right now.... All for zdayz

https://live.staticflickr.com/65535/...67e6189a_c.jpg

Rusty 05-12-2019 04:46 PM
Over kill. :rofl2: Most only do the front bumper, and the front half of the hood. Hope that it don't rain and then the sun comes out and starts to bake. :eek:

Leingod 05-12-2019 04:50 PM
Quote:
Originally Posted by Rusty (Post 3851765)
Over kill. :rofl2: Most only do the front bumper, and the front half of the hood. Hope that it don't rain and then the sun comes out and starts to bake. :eek:
If we catch rain on the way down followed by intense heat, the paint is coming off asap. Not going to risk damaging the clear coat for basic rock chip protection. The front bumper already has a clear vinyl on it anyways.

mishuko 05-12-2019 08:14 PM
Quote:
Originally Posted by Leingod (Post 3851767)
If we catch rain on the way down followed by intense heat, the paint is coming off asap. Not going to risk damaging the clear coat for basic rock chip protection. The front bumper already has a clear vinyl on it anyways.
Be a man and drive unprotected from canader. Lol about half the paint got chipped off

JARblue 05-13-2019 09:23 AM
If you have trouble with streaks on your glass (inside or outside) you are using the wrong kind of towel and/or too much product. If the glass is especially dirty then you can use whatever towel and a lot of cleaner. After most of the excess product is removed, wipe off the rest with a quality glass towel. If the glass is pretty clean, then a glass towel and minimal amount of product is all that is needed.

I watch videos of people literally covering the entire glass surface with a product. What a waste. For me, one light misting on the towel is usually sufficient for half the front windshield or one door window.

Hotrodz 05-13-2019 11:38 AM
Quote:
Originally Posted by JARblue (Post 3851996)
If you have trouble with streaks on your glass (inside or outside) you are using the wrong kind of towel and/or too much product. If the glass is especially dirty then you can use whatever towel and a lot of cleaner. After most of the excess product is removed, wipe off the rest with a quality glass towel. If the glass is pretty clean, then a glass towel and minimal amount of product is all that is needed.



I watch videos of people literally covering the entire glass surface with a product. What a waste. For me, one light misting on the towel is usually sufficient for half the front windshield or one door window.
Yep, still a pain in the arse. Hard to keep the back of my hand from touching the window and then dust loves a clean window so don't turn on AC or vents. I don't worry about it to much. Close enough is good enough because racecar!

Sent from my SM-G965U using Tapatalk

ColtronZ 05-13-2019 12:04 PM
Took my headlight off, drained the water, and put silicone where the halo wire comes out of the opening since there is a gap in the rubber ring and cap. Hoping that was the cause and not the rest of the headlight seal. Only to later fully realize my headlight bulb is either burnt out or my headlight is borked. Really hoping its the lightbulb... I thought that side appeared darker but I don't drive at night often and didn't think of checking. It's an after Zdayz project since there is now silicone I have to remove to even get in there. YAY

BettyZ 05-13-2019 01:48 PM
Quote:
Originally Posted by ColtronZ (Post 3852043)
Took my headlight off, drained the water, and put silicone where the halo wire comes out of the opening since there is a gap in the rubber ring and cap. Hoping that was the cause and not the rest of the headlight seal. Only to later fully realize my headlight bulb is either burnt out or my headlight is borked. Really hoping its the lightbulb... I thought that side appeared darker but I don't drive at night often and didn't think of checking. It's an after Zdayz project since there is now silicone I have to remove to even get in there. YAY
I had moisture in my 350z headlight and thought the bulb was out too. Turns out the ballast was fried. I'd try replacing that first.

Sent from my SM-G955U using Tapatalk

BettyZ 05-13-2019 01:49 PM
Quote:
Originally Posted by Hotrodz (Post 3852034)
Yep, still a pain in the arse. Hard to keep the back of my hand from touching the window and then dust loves a clean window so don't turn on AC or vents. I don't worry about it to much. Close enough is good enough because racecar!

Sent from my SM-G965U using Tapatalk
Adam's Polishes glass cleaner and glass towels for sure. Also, nitrile gloves! I go through 20 pairs or so when I detail my Z.

Sent from my SM-G955U using Tapatalk

mishuko 05-13-2019 02:00 PM
Quote:
Originally Posted by Hotrodz (Post 3852034)
Yep, still a pain in the arse. Hard to keep the back of my hand from touching the window and then dust loves a clean window so don't turn on AC or vents. I don't worry about it to much. Close enough is good enough because racecar!

Sent from my SM-G965U using Tapatalk
Racecar is always the answer.

Lol although i am OCD as hell when it comes to windows. Atleast the interior has to be smudge free to make sure that limited viewing is maximized

Hotrodz 05-13-2019 02:08 PM
Quote:
Originally Posted by BettyZ (Post 3852074)
Adam's Polishes glass cleaner and glass towels for sure. Also, nitrile gloves! I go through 20 pairs or so when I detail my Z.

Sent from my SM-G955U using Tapatalk
LOL, that is too much work. I use rag company glass cleaning polishing towels after following the method Jar posted. She looks good but ain't no hard parking show car. Hell, I got to get the sand and dust out of her after doing a little off roading at the track the weekend my motor blew back in November.

Sent from my SM-G965U using Tapatalk

bunk 05-13-2019 02:14 PM
Vinegar mixed with water, crumpled up news paper (not the Ads with color ink). Streak free...

Wouldnt recommend on tinted windows though.

mishuko 05-13-2019 02:15 PM
Quote:
Originally Posted by Hotrodz (Post 3852034)
Yep, still a pain in the arse. Hard to keep the back of my hand from touching the window and then dust loves a clean window so don't turn on AC or vents. I don't worry about it to much. Close enough is good enough because racecar!

Sent from my SM-G965U using Tapatalk
Quote:
Originally Posted by Hotrodz (Post 3852084)
LOL, that is too much work. I use rag company glass cleaning polishing towels after following the method Jar posted. She looks good but ain't no hard parking show car. Hell, I got to get the sand and dust out of her after doing a little off roading at the track the weekend my motor blew back in November.

Sent from my SM-G965U using Tapatalk
Well i mean if you just sit in first redlining all day....:stirthepot:

ColtronZ 05-13-2019 03:04 PM
Quote:
Originally Posted by BettyZ (Post 3852073)
I had moisture in my 350z headlight and thought the bulb was out too. Turns out the ballast was fried. I'd try replacing that first.

Sent from my SM-G955U using Tapatalk
I hope its one of the two. I'll buy both for when I do take it apart thanks! I'm hoping the bottom piece that the ballast connects to isn't shot. It has rust on it from where water sat but it appears sealed.

Update: apparently you can buy that piece with it too, it's the igniter

JARblue 05-13-2019 03:22 PM
Quote:
Originally Posted by Hotrodz (Post 3852084)
LOL, that is too much work. I use rag company glass cleaning polishing towels after following the method Jar posted. She looks good but ain't no hard parking show car. Hell, I got to get the sand and dust out of her after doing a little off roading at the track the weekend my motor blew back in November.
I use gloves when I wipe down by the front windshield - both the window and the dash - to avoid the rubbing the clean surfaces. Don't bother with gloves anywhere else.

You need to get over there when the motor is pulled so you can detail that empty engine bay :tup:

Rag Company FTMFW. Adam's towels are way overpriced. I have both. I do use a variety of Adam's cleaners though.

JARblue 05-13-2019 03:24 PM
1 Attachment(s)
Looks like I've finalized my ZSpeed order with Joe. Just waiting on the Wavetrac differential to arrive.

Hotrodz 05-13-2019 04:00 PM
Quote:
Originally Posted by JARblue (Post 3852124)
I use gloves when I wipe down by the front windshield - both the window and the dash - to avoid the rubbing the clean surfaces. Don't bother with gloves anywhere else.



You need to get over there when the motor is pulled so you can detail that empty engine bay :tup:



Rag Company FTMFW. Adam's towels are way overpriced. I have both. I do use a variety of Adam's cleaners though.
Agreed! I use Adam's car car products too. Yeah it would be nice to get a fresh coat of paint. Seb does a good job of cleaning things up. My problem is I like to take off road excursions from time to time LOL.

Sent from my SM-G965U using Tapatalk

Hotrodz 05-13-2019 04:01 PM
Quote:
Originally Posted by mishuko (Post 3852090)
Well i mean if you just sit in first redlining all day....:stirthepot:
I do my hard parking at ZDAYZ after a good run on the Dragon!

Sent from my SM-G965U using Tapatalk

Leingod 05-13-2019 04:11 PM
Quote:
Originally Posted by Hotrodz (Post 3852138)
I do my hard parking at ZDAYZ after a good run on the Dragon!

Sent from my SM-G965U using Tapatalk
You borrowing someone's car this year?

mishuko 05-13-2019 04:29 PM
Quote:
Originally Posted by Hotrodz (Post 3852138)
I do my hard parking at ZDAYZ after a good run on the Dragon!

Sent from my SM-G965U using Tapatalk
Seriously i went early got some runs in with mazoc, tigger and then called it a week for the dragon before the entire world shows up

BettyZ 05-13-2019 11:02 PM
Quote:
Originally Posted by JARblue (Post 3852124)
I use gloves when I wipe down by the front windshield - both the window and the dash - to avoid the rubbing the clean surfaces. Don't bother with gloves anywhere else.



You need to get over there when the motor is pulled so you can detail that empty engine bay :tup:



Rag Company FTMFW. Adam's towels are way overpriced. I have both. I do use a variety of Adam's cleaners though.
I'm not a Cali enviroweenie Prop 65 'reading this post gave me cancer' type, but I am a firm believer in PPE.

Sent from my SM-G955U using Tapatalk

Hotrodz 05-13-2019 11:13 PM
Quote:
Originally Posted by Leingod (Post 3852139)
You borrowing someone's car this year?
Yep....yours!:stirthepot::inoutroflpuke:


All times are GMT -5. The time now is 09:30 AM.
Page 78 of 164 « First 28687677 78 798088128 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2