anyone installed a stillen gen3 long tube cold air intake?

henryy370z · 06-17-2012, 03:57 PM

how was the gains?
was it hard to install?

shadoquad · 06-17-2012, 04:04 PM

I have the Injens, but the Stillens have the best gains.

Check the DIY section for installation details. I doubt it's too difficult.

Nismo89 · 06-17-2012, 04:10 PM

i have the Stillen Gen 3 intake. generally easy to install, you just got to remember to wrap a few things before installing and your good to go. i had my Shop install them since im not very good at it and the Overall Gains..... stillen claims 17.5 hp gains. real noticeable throaty growl and from the expressions of ppls faces when they get in the car " really puts you back in the back of your seat!"

but again its all up to you and what you want to do

henryy370z · 06-17-2012, 04:10 PM

thanks

tjlazer · 06-17-2012, 04:23 PM

Please use Search. This is the most common CAI for the 370Z. Lots and lots of info on this site.

RiCharlie · 06-17-2012, 05:08 PM

Quote:

Originally Posted by Nismo89

i have the Stillen Gen 3 intake. generally easy to install, you just got to remember to wrap a few things before installing and your good to go. i had my Shop install them since im not very good at it and the Overall Gains..... stillen claims 17.5 hp gains. real noticeable throaty growl and from the expressions of ppls faces when they get in the car " really puts you back in the back of your seat!"

but again its all up to you and what you want to do

Can you really feel a difference? And doesnt this put added strain on the transmission which might cause problems and void the warrenty?

christian370z · 06-17-2012, 06:14 PM

Quote:

Originally Posted by RiCharlie

Can you really feel a difference? And doesnt this put added strain on the transmission which might cause problems and void the warrenty?

No, no one has ever had transmission issues on either the 7AT or 6MT from bolt ons that I'm aware of. The only time there are power related issues with transmissions on the Z34 is when forced induction such as superchargers and turbos are used, and even then it's only been an issue on the 7AT.

You'll be perfectly fine.

shadoquad · 06-17-2012, 07:00 PM

Quote:

Originally Posted by christian370z

No, no one has ever had transmission issues on either the 7AT or 6MT from bolt ons that I'm aware of. The only time there are power related issues with transmissions on the Z34 is when forced induction such as superchargers and turbos are used, and even then it's only been an issue on the 7AT.

You'll be perfectly fine.

henryy370z · 06-18-2012, 06:49 AM

i heard from the stillen longtube gen 3 i have to cut the air filters so it can fit??

XwChriswX · 06-18-2012, 06:58 AM

Quote:

Originally Posted by henryy370z

i heard from the stillen longtube gen 3 i have to cut the air filters so it can fit??

As already mentioned, the search feature is your friend and can answer almost any and all questions you might have.

i.e. "Stillen Intake":

Stillen G3 Intake Install

http://www.the370z.com/diy-section-d...de-ak370z.html

Stillen Intake

Stillen Generation 3 Intake

Stillen gen 3 intake...review

Stillen gen 3 intake and exhaust review

Put in a Stillen G3 intake yesterday night...

Stillen Gen 3 Cold Intake

Stillen Gen III ultra long intake?

STILLEN G3 Ultra Long Tube Intake

STILLEN Exhaust & Gen 3 Intake Dynos - 18hp Each!

Stillen Intake for VQ37VHR

You're welcome.

Filipe · 03-20-2016, 01:09 AM

Quote:

Originally Posted by XwChriswX

As already mentioned, the search feature is your friend and can answer almost any and all questions you might have.

i.e. "Stillen Intake":

Stillen G3 Intake Install

http://www.the370z.com/diy-section-d...de-ak370z.html

Stillen Intake

Stillen Generation 3 Intake

Stillen gen 3 intake...review

Stillen gen 3 intake and exhaust review

Put in a Stillen G3 intake yesterday night...

Stillen Gen 3 Cold Intake

Stillen Gen III ultra long intake?

STILLEN G3 Ultra Long Tube Intake

STILLEN Exhaust & Gen 3 Intake Dynos - 18hp Each!

Stillen Intake for VQ37VHR

You're welcome.

thank you

1st · 03-20-2016, 02:49 AM

If you can change a flat you can take off your bumper. I felt the price for the intakes are of cheap quality but the gains are there.

Breadz · 03-21-2016, 12:55 PM

Quote:

Originally Posted by RiCharlie

Can you really feel a difference? And doesnt this put added strain on the transmission which might cause problems and void the warrenty?

I could feel the diffrence instantly, more wheel spin in second gear for sure

06-17-2012, 03:57 PM	#1 (permalink)
henryy370z Enthusiast Member Join Date: May 2012 Location: nj bergen county Age: 31 Posts: 380 Drives: 2011-black-manual Rep Power: 12	anyone installed a stillen gen3 long tube cold air intake? how was the gains? was it hard to install?

06-17-2012, 04:10 PM	#3 (permalink)
Nismo89 A True Z Fanatic Join Date: Mar 2011 Location: Colora, MD Age: 34 Posts: 15,831 Drives: daily Zen and woosah Rep Power: 37386	i have the Stillen Gen 3 intake. generally easy to install, you just got to remember to wrap a few things before installing and your good to go. i had my Shop install them since im not very good at it and the Overall Gains..... stillen claims 17.5 hp gains. real noticeable throaty growl and from the expressions of ppls faces when they get in the car " really puts you back in the back of your seat!" but again its all up to you and what you want to do __________________ Why yes.. Mike Rowe of Dirty Jobs, The Ford Commericals,Deadliest Catch.. is my cousin. Facebook i outta back hand you with my right hand! and call you b*tch!..... and im Left handed!

06-17-2012, 04:23 PM	#5 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	Please use Search. This is the most common CAI for the 370Z. Lots and lots of info on this site. MagmaRed370z likes this. __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

03-20-2016, 02:49 AM	#12 (permalink)
1st A True Z Fanatic Join Date: Jul 2012 Location: I 80 Biz U.S. 50 Posts: 1,708 Drives: Platinum Z Rep Power: 1615	If you can change a flat you can take off your bumper. I felt the price for the intakes are of cheap quality but the gains are there. Last edited by 1st; 03-20-2016 at 03:02 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NISMO R-TUNE Cold Air Intake (Long Tube)	GTLAW	Intake/Exhaust	25	02-09-2014 03:50 PM
What is the best Cold Air intake (long tube)?	Jonathan Vach	Intake/Exhaust	17	04-17-2012 07:44 PM
AEM dual cold air intake (long tube)	Marco_xyz	Intake/Exhaust	177	10-15-2011 11:17 PM
Stillen Gen3 Ultra long tube dual Intake Kit-still in box	boomboom	Parts for sale (Private Classifieds)	3	03-05-2011 09:36 PM
STILLEN G3 Ultra Long Tube Intake	nogoodname	Intake/Exhaust	117	03-17-2009 11:25 PM

06-17-2012, 04:04 PM	#2 (permalink)
shadoquad A True Z Fanatic Join Date: Apr 2010 Location: . Posts: 42,608 Drives: . Rep Power: 3886	I have the Injens, but the Stillens have the best gains. Check the DIY section for installation details. I doubt it's too difficult.

06-17-2012, 04:10 PM	#4 (permalink)
henryy370z Enthusiast Member Join Date: May 2012 Location: nj bergen county Age: 31 Posts: 380 Drives: 2011-black-manual Rep Power: 12	thanks

06-18-2012, 06:49 AM	#9 (permalink)
henryy370z Enthusiast Member Join Date: May 2012 Location: nj bergen county Age: 31 Posts: 380 Drives: 2011-black-manual Rep Power: 12	i heard from the stillen longtube gen 3 i have to cut the air filters so it can fit??