Requesting pics of Nismo front fender lining

boosted3z · 08-09-2014, 11:08 AM

If anyone can snap a couple of pics showing how the front wheel well fender lining looks/lines up on a Nismo, I'd appreciate it. I recently had mine replaced, but I'm 99 % sure they installed the one that belongs to the non-Nismo bumper in error. Just need pics to back it up.

Thanks.

chops · 08-09-2014, 02:03 PM

Nissan OEM 370Z Front Fender Liner Splash Guard RH Nismo Z34 - performance parts

OldFart · 08-09-2014, 02:17 PM

I can take a pic over tbe weekend since I'm in the middle of a conversion. Although the non-nismo liners have the extension on the bottom where as the Nismo's don't. The one pictured above in the link above is not correct.

Nismo ones

Non Nismo one

boosted3z · 08-10-2014, 10:09 AM

Quote:

Originally Posted by OldFart

I can take a pic over tbe weekend since I'm in the middle of a conversion. Although the non-nismo liners have the extension on the bottom where as the Nismo's don't. The one pictured above in the link above is not correct.

Nismo ones

Non Nismo one

Thanks OldFart. If you can get me a pic of the correct ones installed on your car, it would be really helpful. I'm unable to compare the piece itself since it's already in the wheel well.

OldFart · 08-10-2014, 07:06 PM

Here are pics from both corners, mind you I'm using a ZSpeed undertray on mine.

Passenger side

Driver Side

boosted3z · 08-10-2014, 09:21 PM

Thanks again. When the bumper and liners are fully installed, is there a gap between them where the I placed the red circle?

OldFart · 08-11-2014, 02:20 PM

Here are pics when I attached and installed..

Attached with rivets on both sides.

And when installed.

boosted3z · 08-12-2014, 07:39 AM

This looks to be the piece I need. Do you happen to have a part #? Thanks for all your help.

OldFart · 08-12-2014, 07:51 AM

It's actually 2 pieces on each side, and then a bracket on the bottom. Here are the part numbers, and yes they are expensive for what they are. Some guys will just use a heavy duty plastic and cut accordingly. Hell, the black pop rivets are a little over $4 a piece and ya need 12.

62066 - F2064-1A30A - Front Bumper Protector - QTY: 1 - $130.17
62066 +A - F2064-1A30B - Front Bumper Protector - QTY: 1 - $130.17
62066 +B - F2064-1A30C - Front Bumper Protector - QTY: 1 - $130.17
62066 +C - F2064-1A30D - Front Bumper Protector - QTY: 1 - $130.17
62675 - F2042-1A30A - Front Bumper Bracket (Bumper to Diffuser attachment) - QTY: 2 - $111.73

Joe@ZSpeed · 07-21-2015, 01:21 PM

We just got these finished up for the 09-14 Nismo , Replaces part # F2042-1A30A
We are also working on the small corner pieces

ZSpeed Performance Nissan Infinti OEM & Performance Parts

This thread is a little old but if anyone is looking for these this may help save over $100 on the OEM parts.

Horizon · 07-26-2021, 04:50 PM

Quote:

Originally Posted by Joe@ZSpeed

We just got these finished up for the 09-14 Nismo , Replaces part # F2042-1A30A
We are also working on the small corner pieces

ZSpeed Performance Nissan Infinti OEM & Performance Parts

This thread is a little old but if anyone is looking for these this may help save over $100 on the OEM parts.

Did you guys ever get around to making the cheap small corner pieces?

Joe@ZSpeed · 07-27-2021, 08:51 AM

Quote:

Originally Posted by Horizon

Did you guys ever get around to making the cheap small corner pieces?

Unfortunately we never produced these.

Horizon · 07-27-2021, 10:50 AM

Quote:

Originally Posted by Joe@ZSpeed

Unfortunately we never produced these.

Damn, I had been waiting for them for about a year now since I first found this thread. What stopped their production?

08-09-2014, 11:08 AM	#1 (permalink)
boosted3z Banned Join Date: Apr 2012 Location: ny Posts: 158 Drives: Audi RS5 Rep Power: 0	Requesting pics of Nismo front fender lining If anyone can snap a couple of pics showing how the front wheel well fender lining looks/lines up on a Nismo, I'd appreciate it. I recently had mine replaced, but I'm 99 % sure they installed the one that belongs to the non-Nismo bumper in error. Just need pics to back it up. Thanks.

08-09-2014, 02:17 PM	#3 (permalink)
OldFart Track Member Join Date: May 2013 Location: Carlisle, PA Age: 61 Posts: 682 Drives: 2011 Wannabe Nismo Rep Power: 959	I can take a pic over tbe weekend since I'm in the middle of a conversion. Although the non-nismo liners have the extension on the bottom where as the Nismo's don't. The one pictured above in the link above is not correct. Nismo ones Non Nismo one JARblue likes this. Last edited by OldFart; 08-09-2014 at 03:30 PM.

07-21-2015, 01:21 PM	#10 (permalink)
Joe@ZSpeed The370Z.com Sponsor Join Date: Mar 2011 Location: Ohio Posts: 1,304 Drives: Nissan Rep Power: 342999	We just got these finished up for the 09-14 Nismo , Replaces part # F2042-1A30A We are also working on the small corner pieces ZSpeed Performance Nissan Infinti OEM & Performance Parts This thread is a little old but if anyone is looking for these this may help save over $100 on the OEM parts. jaytirbhaw, Rusty and 1slodriver like this. __________________ Phone *937-506-7224* E-Mail Sales@Zspeed.com www.ZSPEED.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Plastic Fender lining removal?	Riptide67	Wheels & Tires	5	01-27-2014 12:33 AM
Rolled front fender pics requested please!!	ka24king	Exterior & Interior	12	10-14-2013 09:49 AM
DIY: Fender Lining Vent for Oil Cooler GTM Supercharger Stage 1 on NISMO	wind.zero	DIY Section (Do-It-Yourself)	14	04-19-2012 02:49 PM
PW 370z nismo broken front bumper.. fixable?? (lots of Pics)	scottnismo	Exterior & Interior	17	03-07-2012 05:28 AM

08-09-2014, 02:03 PM	#2 (permalink)
chops A True Z Fanatic Join Date: Oct 2010 Location: NA Posts: 1,732 Drives: NA Rep Power: 21	Nissan OEM 370Z Front Fender Liner Splash Guard RH Nismo Z34 - performance parts

08-10-2014, 07:06 PM	#5 (permalink)
OldFart Track Member Join Date: May 2013 Location: Carlisle, PA Age: 61 Posts: 682 Drives: 2011 Wannabe Nismo Rep Power: 959	Here are pics from both corners, mind you I'm using a ZSpeed undertray on mine. Passenger side Driver Side

08-10-2014, 09:21 PM	#6 (permalink)
boosted3z Banned Join Date: Apr 2012 Location: ny Posts: 158 Drives: Audi RS5 Rep Power: 0	Thanks again. When the bumper and liners are fully installed, is there a gap between them where the I placed the red circle?

08-11-2014, 02:20 PM	#7 (permalink)
OldFart Track Member Join Date: May 2013 Location: Carlisle, PA Age: 61 Posts: 682 Drives: 2011 Wannabe Nismo Rep Power: 959	Here are pics when I attached and installed.. Attached with rivets on both sides. And when installed.

08-12-2014, 07:39 AM	#8 (permalink)
boosted3z Banned Join Date: Apr 2012 Location: ny Posts: 158 Drives: Audi RS5 Rep Power: 0	This looks to be the piece I need. Do you happen to have a part #? Thanks for all your help.

08-12-2014, 07:51 AM	#9 (permalink)
OldFart Track Member Join Date: May 2013 Location: Carlisle, PA Age: 61 Posts: 682 Drives: 2011 Wannabe Nismo Rep Power: 959	It's actually 2 pieces on each side, and then a bracket on the bottom. Here are the part numbers, and yes they are expensive for what they are. Some guys will just use a heavy duty plastic and cut accordingly. Hell, the black pop rivets are a little over $4 a piece and ya need 12. 62066 - F2064-1A30A - Front Bumper Protector - QTY: 1 - $130.17 62066 +A - F2064-1A30B - Front Bumper Protector - QTY: 1 - $130.17 62066 +B - F2064-1A30C - Front Bumper Protector - QTY: 1 - $130.17 62066 +C - F2064-1A30D - Front Bumper Protector - QTY: 1 - $130.17 62675 - F2042-1A30A - Front Bumper Bracket (Bumper to Diffuser attachment) - QTY: 2 - $111.73