2010 370z Nismo lowering springs

Nizmolife · 03-13-2012, 05:15 PM

Hi guys,

I have been doing some research on what springs to go with and I want as much drop as possible without going to coilovers. I decided to go with H&R springs. I also have been doing some research on H&R springs and it seems that the normal 370z spring setup is different that the Nismo setup or Roadster. All I'm looking for the part number of the H&R lowering spring set that compatible with the 2010 370z Nismo. I asked a vendor off site and they told me that the coupe springs are "NOT" compatible with the Nismo. Is that true?

Thanks guys.

Nizmolife · 03-14-2012, 09:15 PM

No one has an answer? Really?

MJB · 03-14-2012, 10:15 PM

That isn't true. The coupe springs will fit the Nismo. I bought the same springs... just haven't installed them yet.

Nizmolife · 03-15-2012, 05:30 AM

Which springs did you buy? H&R? If so do you have the part number?
Thanks

MJB · 03-15-2012, 07:57 AM

Quote:

Originally Posted by Nizmolife

Which springs did you buy? H&R? If so do you have the part number?
Thanks

H&R Sport Springs. Part # 53075

Nizmolife · 03-15-2012, 06:29 PM

Thanks MJB.. Appreciate it!

MrJdmNismo · 05-08-2012, 11:35 AM

Quote:

Originally Posted by Nizmolife

Thanks MJB.. Appreciate it!

did you get the springs?

Armhunter · 05-08-2012, 11:59 AM

Will these springs ruin the ride or make it better? Wont this put more strain on the specific parts on the car itself? I have heard bad things about lowering cars. I did it to my 99 ecplise GST back in the day. It was so low that I could not fit a tennis ball under. I hit every single speed bump, scraped up my car all the time. I had to buy a camber kit just so that it wouldnt eat the tires like mad! I had it in the shop every other month having adjusted because it would not hold. I am not touching my nismo, to me its low enough. I have a hard time getting in and out of places already even when taking it at an angle...

fuct · 05-08-2012, 01:27 PM

arm hunter i say leave her stock then.

forza370z · 05-08-2012, 04:21 PM

Do you guys know the spring rate on H&R compare to the stock Nismo springs? How much of a drop the H&R will do on a Nismo?

MacLean · 05-08-2012, 04:37 PM

Quote:

Originally Posted by Armhunter

Will these springs ruin the ride or make it better? Wont this put more strain on the specific parts on the car itself? I have heard bad things about lowering cars. I did it to my 99 ecplise GST back in the day. It was so low that I could not fit a tennis ball under. I hit every single speed bump, scraped up my car all the time. I had to buy a camber kit just so that it wouldnt eat the tires like mad! I had it in the shop every other month having adjusted because it would not hold. I am not touching my nismo, to me its low enough. I have a hard time getting in and out of places already even when taking it at an angle...

+1........

I am in the same boat as you big guy. Yeah having it lowered a bit would be a little bit cleaner looking, but at what price (pain in the a** getting in/out of places).

Armhunter · 05-09-2012, 12:04 AM

Quote:

Originally Posted by cgmg21

+1........

I am in the same boat as you big guy. Yeah having it lowered a bit would be a little bit cleaner looking, but at what price (pain in the a** getting in/out of places).

Well, on my old Eclipse it was very necessary, it had a huge gap between the wheels and the body. Maybe I should of gotten bigger rims and tires. But on this car, to me, it looks just fine! I just washed it today and noticed I have already scraped up the bottom of the front fender.

MacLean · 05-09-2012, 12:49 AM

Quote:

Originally Posted by Armhunter

Well, on my old Eclipse it was very necessary, it had a huge gap between the wheels and the body. Maybe I should of gotten bigger rims and tires. But on this car, to me, it looks just fine! I just washed it today and noticed I have already scraped up the bottom of the front fender.

Hmmm...... It is the black plastic (skid pad) under the car that gets scraped. I'm not too worried about that, but if it happens all the time I would be pissed. It is there to help protect your vehicle & paint. I would rather have that scraped up, then the actual bump or fender.

fuct · 05-09-2012, 11:46 AM

drive carefully or deal with it. i scrape mine all the time. prob twice a day......

Armhunter · 05-09-2012, 01:14 PM

Quote:

Originally Posted by fuct

drive carefully or deal with it. i scrape mine all the time. prob twice a day......

Stayed at a very nice hotel this last weekend near Hollywood. Parked in their lower garage but to get into the garage it was extremely steep. I did drive as careful as I could, angled it as much as possible. It didnt matter, I scraped. If my car was lowered, I would never have been able to get into the garage. Sometimes you dont have a choice.

03-13-2012, 05:15 PM	#1 (permalink)
Nizmolife Base Member Join Date: Apr 2011 Location: Rochester Michigan Posts: 30 Drives: 2010 370z Nismo #156 Rep Power: 16	2010 370z Nismo lowering springs Hi guys, I have been doing some research on what springs to go with and I want as much drop as possible without going to coilovers. I decided to go with H&R springs. I also have been doing some research on H&R springs and it seems that the normal 370z spring setup is different that the Nismo setup or Roadster. All I'm looking for the part number of the H&R lowering spring set that compatible with the 2010 370z Nismo. I asked a vendor off site and they told me that the coupe springs are "NOT" compatible with the Nismo. Is that true? Thanks guys.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nismo Lowered on Tein S Tech Lowering Springs	johnnydrama	Brakes & Suspension	80	03-04-2012 10:23 AM
Spacers, lowering springs on the nismo - my pros and cons	torpedo2k	Nismo 370Z	7	06-04-2011 04:09 PM
New Eibach Pro Kit Lowering Springs 370Z	al370z	Parts for sale (Private Classifieds)	13	06-23-2010 10:09 PM
Lowering Springs on a Nismo?	johnnydrama	Brakes & Suspension	16	06-18-2010 06:35 PM
370z lowering springs on sale now	ERZperformance	ERZperformance	0	06-25-2009 04:18 AM

03-14-2012, 09:15 PM	#2 (permalink)
Nizmolife Base Member Join Date: Apr 2011 Location: Rochester Michigan Posts: 30 Drives: 2010 370z Nismo #156 Rep Power: 16	No one has an answer? Really?

03-14-2012, 10:15 PM	#3 (permalink)
MJB A True Z Fanatic Join Date: Aug 2011 Location: Tacoma, WA Age: 42 Posts: 1,498 Drives: a POS truck Rep Power: 497	That isn't true. The coupe springs will fit the Nismo. I bought the same springs... just haven't installed them yet.

03-15-2012, 05:30 AM	#4 (permalink)
Nizmolife Base Member Join Date: Apr 2011 Location: Rochester Michigan Posts: 30 Drives: 2010 370z Nismo #156 Rep Power: 16	Which springs did you buy? H&R? If so do you have the part number? Thanks

03-15-2012, 06:29 PM	#6 (permalink)
Nizmolife Base Member Join Date: Apr 2011 Location: Rochester Michigan Posts: 30 Drives: 2010 370z Nismo #156 Rep Power: 16	Thanks MJB.. Appreciate it!

05-08-2012, 11:59 AM	#8 (permalink)
Armhunter Enthusiast Member Join Date: Mar 2012 Location: bakersfield, CA Posts: 338 Drives: 12 Nissan 370z Nismo Rep Power: 15	Will these springs ruin the ride or make it better? Wont this put more strain on the specific parts on the car itself? I have heard bad things about lowering cars. I did it to my 99 ecplise GST back in the day. It was so low that I could not fit a tennis ball under. I hit every single speed bump, scraped up my car all the time. I had to buy a camber kit just so that it wouldnt eat the tires like mad! I had it in the shop every other month having adjusted because it would not hold. I am not touching my nismo, to me its low enough. I have a hard time getting in and out of places already even when taking it at an angle...

05-08-2012, 01:27 PM	#9 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 26	arm hunter i say leave her stock then.

05-08-2012, 04:21 PM	#10 (permalink)
forza370z A True Z Fanatic Join Date: Oct 2011 Location: 403 Forbidden Posts: 2,512 Drives: 2009 NISMO 370Z Rep Power: 20	Do you guys know the spring rate on H&R compare to the stock Nismo springs? How much of a drop the H&R will do on a Nismo?

05-09-2012, 11:46 AM	#14 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 26	drive carefully or deal with it. i scrape mine all the time. prob twice a day......